Keysight Technologies 16089A Manual de operación

Operation and

Service Manual

Keysight 16089A/B/C Kelvin Clip Leads

Notices

1991-2020

No part of this manual may be

reproduced in any form or by any

means (including electronic storage

and retrieval or translation into a

foreign language) without prior

agreement and written consent from

Keysight Technologies, Inc. as

governed by United States and

international copyright laws.

Trademark Acknowledgments

Manual Part Number

16089-90030

Edition

Edition 7, January 2020

Printed in Malaysia

Published by:

Keysight Technologies International

Japan G.K,

1-3-3 Higashikawasaki-cho

Chuo-ku

Kobe-shi, Hyogo, Japan

Warranty

THE MATERIAL CONTAINED IN THIS

DOCUMENT IS PROVIDED “AS IS,”

AND IS SUBJECT TO BEING

CHANGED, WITHOUT NOTICE, IN

FUTURE EDITIONS. FURTHER, TO

THE MAXIMUM EXTENT PERMITTED

BY APPLICABLE LAW, KEYSIGHT

DISCLAIMS ALL WARRANTIES,

EITHER EXPRESS OR IMPLIED WITH

REGARD TO THIS MANUAL AND

ANY INFORMATION CONTAINED

HEREIN, INCLUDING BUT NOT

LIMITED TO THE IMPLIED

WARRANTIES OF

MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE.

KEYSIGHT SHALL NOT BE LIABLE

FOR ERRORS OR FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES IN

CONNECTION WITH THE

FURNISHING, USE, OR

PERFORMANCE OF THIS

DOCUMENT OR ANY INFORMATION

CONTAINED HEREIN. SHOULD

KEYSIGHT AND THE USER HAVE A

SEPARATE WRITTEN AGREEMENT

WITH WARRANTY TERMS

COVERING THE MATERIAL IN THIS

DOCUMENT THAT CONFLICT WITH

THESE TERMS, THE WARRANTY

TERMS IN THE SEPARATE

AGREEMENT WILL CONTROL.

Technology Licenses

The hardware and/or software

described in this document are

furnished under a license and may be

used or copied only in accordance

with the terms of such license.

Declaration of Conformity

Declarations of Conformity for this

product and for other Keysight

products may be downloaded from

the Web. Go to

http://www.keysight.com/go/confor

mity. You can then search by product

number to find the latest Declaration

of Conformity.

U.S. Government Rights

The Software is “commercial

computer software,” as defined by

Federal Acquisition Regulation

(“FAR”) 2.101. Pursuant to FAR

12.212 and 27.405-3 and

Department of Defense FAR

Supplement (“DFARS”) 227.7202, the

U.S. government acquires

commercial computer software

under the same terms by which the

software is customarily provided to

the public. Accordingly, Keysight

provides the Software to U.S.

government customers under its

standard commercial license, which

is embodied in its End User License

Agreement (EULA), a copy of which

can be found at

http://www.keysight.com/find/sweul

aThe license set forth in the EULA

represents the exclusive authority by

which the U.S. government may use,

modify, distribute, or disclose the

Software. The EULA and the license

set forth therein, does not require or

permit, among other things, that

Keysight: (1) Furnish technical

information related to commercial

computer software or commercial

computer software documentation

that is not customarily provided to

the public; or (2) Relinquish to, or

otherwise provide, the government

rights in excess of these rights

customarily provided to the public to

use, modify, reproduce, release,

perform, display, or disclose

commercial computer software or

commercial computer software

documentation. No additional

government requirements beyond

those set forth in the EULA shall

apply, except to the extent that those

terms, rights, or licenses are

explicitly required from all providers

of commercial computer software

pursuant to the FAR and the DFARS

and are set forth specifically in

writing elsewhere in the EULA.

Keysight shall be under no obligation

to update, revise or otherwise modify

the Software. With respect to any

technical data as defined by FAR

2.101, pursuant to FAR 12.211 and

27.404.2 and DFARS 227.7102, the

U.S. government acquires no greater

than Limited Rights as defined in FAR

27.401 or DFAR 227.7103-5 (c), as

applicable in any technical data.

Safety Notices

A CAUTION notice denotes a hazard. It

calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in damage to the

product or loss of important data. Do

not proceed beyond a CAUTION

notice until the indicated conditions

are fully understood and met.

A WARNING notice denotes a hazard.

It calls attention to an operating

procedure, practice, or the like that,

if not correctly performed or adhered

to, could result in personal injury or

death. Do not proceed beyond a

WARNING notice until the indicated

conditions are fully understood and

met.

Contents

Keysight 16089A/B/C Operation and Service Manual 3

Table of Contents

1. General Information

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Using the 16089A/B/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Product Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Accessories Supplied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Operating and Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Operating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Supplemental Performance Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Supplemental Performance Characteristics of 16089A . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Supplemental Performance Characteristics of 16089B . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Supplemental Performance Characteristics of 16089C . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2. Preparation for Use

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Initial Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

16089A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

16089B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

16089C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Ambient Environmental Considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Operating and Storage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Connecting the Test Leads for Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Packaging the Test Leads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3. Preparation for Use

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Test Leads Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

16089A/B/C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

OPEN and SHORT Compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4. Service

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Replaceable Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

16089A Replaceable Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

16089B Replaceable Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

16089C Replaceable Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4 Keysight 16089A/B/C Operation and Service Manual

Contents

Keysight 16089A/B/C Kelvin Clip Leads

Operation and Service Manual

1 General Information

Introduction

The purpose of this manual is to enable you to use your Keysight 16089A/B/C

Kelvin Clip Leads efficiently and confidently. This manual contains both general

and specific information. To use the 16089A/B/C to perform a specific function

(without having to read the entire manual), follow the directions in “Using the

16089A/B/C”.

Using the 16089A/B/C

The 16089A/B/C has been designed to operate specifically with the LCR

Meter.

• To install the 16089A/B/C, turn to Chapter 2.

• To operate the 16089A/B/C, turn to Chapter 3.

• To order replaceable parts for the 16089A/B/C, turn to “Replaceable Parts”

in Chapter 4.

6 Keysight 16089A/B/C Kelvin Clip Leads

General Information

Product Description

The 16089A/B/C has been designed to operate specifically with the following

four-terminal-pair type LCR meters and impedance analyzers.

The 16089A/B/C make it possible to measure odd-shaped components that

cannot be measured with conventional test fixtures. The 16089A, 16089B, and

16089C consist of a direct attachment, four-terminal-pair type test leads that

are equipped with two insulated Kelvin clips. Three sizes of Kelvin clips are

provided. The 16089A Kelvin Clip Leads is equipped with two large Kelvin clips,

the 16089B Kelvin Clip Leads is equipped with middle size clips and the

16089C Kelvin Clip Leads is equipped with small size clips.

Accessories Supplied

The following accessories are supplied with the 16089A/B/C:

Table 1-1 Furnished Accessories

Description Part Number Quantity

Operation and Service

Manual (this manual)1

Option ABA 1

1. The manual is furnished only Option ABA is ordered.

Keysight 16089A/B/C Kelvin Clip Leads 7

General Information

Operating and Safety Precautions

Operating

You need to observe only normal precautions in handling and operating the

16089A/B/C. Do not exceed the operating input power, voltage and current

level and signal type appropriate for the instrument being used, refer to your

instrument’s operation manual.

Service

The voltage levels found in these test leads when used with the intended

instruments do not warrant more than normal safety precautions for operator

safety. Nevertheless, service should be performed only by qualified personnel.

Electrostatic discharge (ESD) can damage the highly sensitive

microcircuits in your instrument. ESD damage is most likely to occur as the

test leads are being connected or disconnected. Protect them from ESD

damage by wearing a grounding strap that provides a high resistance path

to ground. Alternatively, ground yourself to discharge any static charge

built-up by touching the outer shell of any grounded instrument chassis

before touching the test port connectors.

Never touch the test clip contacts.

Use a work station equipped with an anti-static work surface.

8 Keysight 16089A/B/C Kelvin Clip Leads

General Information

Specifications

This section lists the complete 16089A/B/C specifications. These specifications

are the performance standards and limits against which the 16089A/B/C is

tested. When shipped from the factory, the 16089A/B/C meets the following

specifications:

Maximum dc Bias Voltage ± 42V peak max

Frequency Range 5Hz to 100kHz

Operating Temperature 0 to 55°C

Operating Humidity ≤95% RH (@40°C)

Non-operating Temperature -40 to 70°C

Non-operating Humidity ≤95% RH (@40°C)

Weight 300g

Cable length 0.94m

Keysight 16089A/B/C Kelvin Clip Leads 9

General Information

Supplemental Performance Characteristics

This section gives supplemental performance characteristics. Supplemental

performance characteristics are not specifications, but are typical

characteristics included as additional information for the operator.

Supplemental performance characteristics are not guaranteed.

Supplemental Performance Characteristics of 16089A

Supplemental Performance Characteristics of 16089B

Supplemental Performance Characteristics of 16089C

Applicable DUT size

Diameter of DUT’s terminals ≤15mm

Applicable DUT size

Diameter of DUT’s terminals ≤7.9mm

Length of DUT’s terminals ≥3mm

Applicable DUT size

Diameter of DUT’s terminals ≤1mm

Space between DUT’s terminals ≥2mm

Length of DUT’s terminals ≥2mm

10 Keysight 16089A/B/C Kelvin Clip Leads

General Information

Supplemental Performance Characteristics

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Keysight Technologies

Keysight Technologies

Keysight Technologies N9030B Manual de instalación y operación

Keysight Technologies

Keysight Technologies MXA N9020A Manual de instalación y operación

Keysight Technologies

Keysight Technologies N778 B Series Manual de usuario

Keysight Technologies

Keysight Technologies N5224/5A Manual de usuario

Keysight Technologies

Keysight Technologies M9485A Guía del usuario

Keysight Technologies

Keysight Technologies M9393A Manual de usuario

Keysight Technologies

Keysight Technologies U2020 X Series Manual de usuario

Keysight Technologies

Keysight Technologies FieldFox B Series Manual de usuario

Keysight Technologies

Keysight Technologies U9361F Manual de usuario

Keysight Technologies

Keysight Technologies NFA X-Series Manual de usuario

Keysight Technologies

Keysight Technologies B2980A Series Manual de usuario

Keysight Technologies

Keysight Technologies X Series Guía de inicio rápido

Keysight Technologies

Keysight Technologies N9000A Manual de instalación y operación

Keysight Technologies

Keysight Technologies 16197A Manual de operación

Keysight Technologies

Keysight Technologies N2797A Manual de usuario

Keysight Technologies

Keysight Technologies N5222B Guía de inicio rápido

Keysight Technologies

Keysight Technologies B2981A Guía de instalación

Keysight Technologies

Keysight Technologies EXA Manual de instalación y operación

Keysight Technologies

Keysight Technologies U1273A Manual de usuario

Keysight Technologies

Keysight Technologies Agilent Technologies PXI Express M9202A Guía del usuario

Keysight Technologies

Keysight Technologies N9030B Manual de instalación y operación

Keysight Technologies

Keysight Technologies M937 A Series Manual de usuario

Keysight Technologies

Keysight Technologies FieldFox N9912A104 Manual de usuario

Keysight Technologies

Keysight Technologies 34980A Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario