Kaba SILCA SW- VAG GROUP-L0 Manual de usuario

SW- VAG®GROUP-L0 (SDD/SBB)

Code: D431375XA - Vers. 2.0

INDEX

1VAG FUNCTIONS MENU (AUDI®- SEAT®- SKODA®- VOLKSVAGEN®)..................... 3

1.1 VAG GROUP........................................................................................ 3

1.2 PROGRAMMING NEW KEYS.............................................................. 5

1.3 NUMBER OF KEYS MEMORIZED....................................................... 8

1.4 READING IMMO ID.............................................................................. 9

1.5 ERRORS ............................................................................................ 10

1.6 ERASE ERRORS ............................................................................... 11

1 VAG FUNCTIONS MENU (AUDI®-SEAT®-SKODA®-VOLKSWAGEN®)

1.1 VAG GROUP

The functions on these vehicles are:

- Programme new keys (max. 8 keys in the memory);

- Reading of the number of keys memorized;

- Read IMMO ID;

- Read the errors present;

- Delete all errors.

To make use of this function, use:

Switch Adapter

CABLE OBDII [00] (STANDARD)

CABLE VAG [01] (OPTIONAL)

New key/s

All keys to be enabled (Max 8)

PIN CODE

Comprising 4 alphanumeric characters

On the label together with the

mechanical code

If applied for to the dealer, it will have 7

numbers and will have to use the

function : CONV. 7-4

SBB CABLE/ADAPTER

CABLE OBD II [00] (STANDARD)

CABLE VAG [01] (OPTIONAL)

WHERE TO FIND THE PLUG DIAGNOSTICS

C2 C3

C5 C7

C8 C9

C10 C14

SELECTING THE CAR MAKE

In this case SDD/SBB is able to automatically recognize the various central units connected and

therefore uses the right communication procedure. Simply identify:

- CAR MODEL

- YEAR OF MANUFACTURE

VOLKSWAGEN

BORA (98- )

CADDY (95-99)

CADDY (00- )

GOLF (95-99)

GOLF (00- )

GOLF CABRIO (95-99)



- Use the  arrow keys to select the make, then press ENTER.

- Press ESC to quit.

FUNCTIONS MENU

This section allows the functions to be carried out, in particular to:

- programme new keys in the immobilizer also when all the original keys are missing;

- erase the code for a missing key from the immobilizer memory;

- check how many keys are stored in the immobilizer memory;

- view the immobilizer ID (ID IMMO);

- erase any errors in the immobilizer memory.

ATTENTION: the programming system for the VAG®group is structured so that every time programming

takes place all the keys that will be used on the given car must be memorized again. It is

therefore not possible to add/erase a single key individually.

If the wrong PIN CODE is entered 3 times consecutively, the immobilizer unit will block.

To release it, leave the key in the ON position (from 30 minutes to 24 hours, according to

the vehicle).

The following is the structure of the VAG®function menu:

VOLKSWAGEN

PROG.NEW KEYS

MEM.KEYS NUMBER

IMMO ID READING

PRESENT ERRORS

ERRORS RESET



- Select and press ENTER.

1.2 PROGRAMMING NEW KEYS

This function can be used to add keys to the immobilizer or erase them.

- To activate the function select “ PROG. NEW KEYS ” and press ENTER.

The display will show:

PROG. NEW KEYS

If you don’t have

PIN CODE

you don’t codify

any key

The PIN CODE is required (secret number with 4 digits).

The PIN CODE is located on the black plastic tag provided with the car key on purchase.

The tag gives the mechanical code and the PIN CODE protected by a black plastic film

(scrape off with a coin).

If the PIN CODE is lost, apply to a VAG® dealer for another one.

- press ESC to quit;

- press ENTER to continue.

The display will show:

- DATES INSERTION -

PIN CODE : XXXX

Keys number : Y

PIN : XXXX

N. Keys : Y

- Enter the PIN CODE and press ENTER;

- Enter the Number of keys to be stored in the memory and press ENTER;

- Press ESC to quit;

- Press ENTER to continue.

The display will show:

CONNECTING ...

# # # # # # # # # #

- Wait a few seconds to communicate with the immobilizer.

If a wrong PIN has been entered or there are errors during communication, the display will

show: error message No. 1 (see Operating Manual chap. 10 – WARNING/ERROR

MESSAGES).

MEMORIZING KEYS

If communication has been successful, the display will show:

COMMUNICATION OK!

Sequentially insert

the keys and turn each

one to the ON position

Press any key ...

Memorization of the keys in the car will now begin.

- Insert all the keys to be memorized one after the other, turning each one to the ON

position.

If errors occur during programming, the immobilizer warning light (located on the

dashboard) will flash rapidly. Repeat the operation.

- Press a key to continue; the display will show:

If the warning light

on the console is

blinking repeat the

procedure because an

error with the keys

has occured

Press any key...

KEY TESTING

ATTENTION: to check that the memorized keys work, test by turning on the car engine. If there are

problems, repeat the operation.

- Press a key to continue.

ARCHIVING OPERATIONS - USER DATA

All the operations carried out can be stored in the machine memory.

The display will show:

Do you want to save

the customer data

>YES



- Select YES/NO and press ENTER.

- No, to return to the IMMOBILIZER functions menu screen;

- Yes, to memorize the data relating to the operation completed;

- ESC to quit.

The display will show:

Do you want to save

PIN CODE?

>YES



- Select YES/NO and press ENTER.

- No, the data are archived except for the PIN CODE.

- Yes, the user data are archived.

USER DATA ARCHIVE

This section is used to enter the user data to be saved for the operation completed;

The display will show:

USER DATA

POS.: 001

DATE: 19/07/01

SURNAME: XXXXXXXXXX

NAME: XXXXXXXXXX

REG.NO: XXXXXXXXXX



- SURNAME (required) (12 characters);

- NAME/NUMBER PLATE (optional) (12 characters).

The following data will be saved automatically:

- POS.: Position in which the data will be saved;

- DATA: Date of the operation;

- MAKE: Car make for which the keys has been memorized;

- MODEL: Car for which the keys has been memorized;

- YEAR: of the model;

- Keys mem.: Number of keys memorized;

- PIN CODE: (if memorization is confirmed by the operator);

- IMMO ID: Immobilizer identification.

To enter the data:

- use the keys  to position the cursor on the item required;

- press to enter and select the field in which to digit the text.

NOTE: to select the letter required, press the corresponding key N times.

The programming capacity of the archive is approx. around 100 users data.

Glossary:

Ô: Deletes characters to the left of the cursor

1 space - . 1

2 A B C 2 à Ä á â Ç

3 D E F 3 è È ë ê

4 G H I 4 ì î ï í

5 J K L 5

6 M N O 6 ò ö ô ó Ñ

7 P Q R S 7 ß

8 T U V 8 ù ü û ú

9 W X Y Z 9

0 0

- Press ENTER to confirm.

- To quit and memorize the data, press ESC.

- Select YES/NO and press ENTER.

Is the information

inserted correct?

>YES



- No, to return to the data entry screen.

- Yes, to store the data in the archive.

1.3 NUMBER OF KEYS MEMORIZED

This function is used to view the number of keys memorized in the immobilizer.

After selection the display will show:

MEM.KEYS NUMBER

If you don’t have

PIN CODE you don’t

codify any key

The PIN CODE is required to use this function.

- press ESC to quit

- press ENTER to continue

The display will show:

- DATES INSERTION -

PIN CODE : XXXX

PIN : XXXX

- Enter the PIN CODE

- press ESC to quit;

- press ENTER to continue.

The display will show:

CONNECTING ...

# # # # # # # # # #

At the end of the operation the display will show:

Keys number in

memory:

Press any key...

- Press a key to quit.

NOTE: this function can be used to start the car with an emergency start. Enter the PIN CODE

and read the number of keys, at the end of the operation the car can be started once, excluding

the immobilizer function (using a key without transponder or with disabled transponder).

If a wrong PIN has been entered or there are errors during communication, the display will

show: error message No. 1 (see Operating Manual chap. 10 – WARNING/ERROR

MESSAGES).

1.4 READING IMMO ID

This function is used to view the immobilizer identification (ID IMMO), a code comprising 14

alphanumerical characters, essential for finding the PIN CODE; In such cases the PIN CODE is

issued by the car manufacturer.

- Select and press ENTER, the display will show:

IMMO ID READING

XXXXXXXXX

IMMO XXXXXXX

XXXXXXX XX

Press ESC to quit

Only the next 14 characters make up the word IMMO relating to immobilizer identification.

- Press ESC to quit.

1.5 ERRORS

This function is used to check for any anomalies in the immobilizer memory.

After selection press ENTER, the display will show:

Please wait:

Present errors

NO ERRORS

If there are no anomalies in the memory, the display will show:

PRESENT ERRORS

NO ERROR

DETECTED

Press any key...

- Press any key.

ERRORS FOUND

If there are anomalies in the memory the display will show how many (XX) errors there are in

the centralized unit memory:

PRESE

T ERRORS

Detected

errors

Press any key...

Press any key to view a description of the error:

Tabla de contenidos

Otros manuales de Cerrar de Kaba

Kaba

Kaba Simplex 8100 Series Manual de usuario

Kaba

Kaba Simplex 6200 Series Manual de usuario

Kaba

Kaba Simplex 7104 Series Manual de usuario

Kaba

Kaba PowerPlex 2000 Series Manual de usuario

Kaba

Kaba EX3600 Manual de usuario

Kaba

Kaba Gege Manual de usuario

Kaba

Kaba SIMPLEX LD450 Manual de usuario

Kaba

Kaba C-lever compact Manual de usuario

Kaba

Kaba SIMPLEX L1000 Series Manual de usuario

Kaba

Kaba Simplex 8100 Series Manual de usuario

Kaba

Kaba Simplex Mechanical Pushbutton Locks Manual de usuario

Kaba

Kaba Simplex 3000 Series Manual de usuario

Kaba

Kaba PowerLever PROX 9000 Manual de usuario

Kaba

Kaba LA GARD 1985 Manual de usuario

Kaba

Kaba Simplex 1000 Series Guía de instalación

Kaba

Kaba Simplex 506 Series Manual de usuario

Kaba

Kaba E-PLEX 2000 Manual de usuario

Kaba

Kaba Quantum Series Manual de usuario

Kaba

Kaba E-Flash EF680 Manual de usuario

Kaba

Kaba SIMPLEX LD470 Manual de usuario

Kaba

Kaba X-09 Manual de usuario

Kaba

Kaba La Gard MECHANICAL Manual de usuario

Kaba

Kaba E-Plex 5000 Manual de usuario

Kaba

Kaba 52 Manual de usuario

Manuales populares de Cerrar de otras marcas

Magic

Magic 105 Manual de usuario

Gantner

Gantner GAT NET.Lock 7020 System Guía rápida

Wittkopp

Wittkopp Insys 7202 Manual de usuario

Dorma

Dorma Studio Classic Manual de usuario

Securam

Securam ECSL-601 Manual de usuario

Sudhaus

Sudhaus 3003 Manual de usuario

Safety 1st

Safety 1st 48517 Manual de usuario

Pado

Pado FDS-10 Manual de usuario

Esco

Esco systeQ Series Manual de usuario

COMPX

COMPX National D8951 Manual de usuario

secureo

secureo Key Box Manual de usuario

Stock Loks

Stock Loks C8713 Manual de usuario

COMPX

COMPX 1T-058 Manual del propietario

Auslock

Auslock T11 Manual de usuario

ELCOM

ELCOM 7205 Manual de usuario

Stealth SAFES

Stealth SAFES ShadowVault Manual de usuario

Knox

Knox KeySecure 5 Manual de usuario

Kwikset

Kwikset 48334/01 Manual de usuario