Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV... Manual de usuario

Network and Security

Manager

Configuring Secure Access Devices Guide

Release

2010.4

Published: 2010-11-17

Revision 01

Juniper Networks, Inc.

1194 North Mathilda Avenue

Sunnyvale, California 94089

USA

408-745-2000

www.juniper.net

of them is in the public domain.

This product includes FreeBSD software developed by the University of California, Berkeley, and its contributors. All of the documentation

release 3.0 by Cornell University and its collaborators. Gated is based on Kirton’s EGP, UC Berkeley’s routing daemon (routed), and DCN’s

HELLO routing protocol. Development of Gated has been supported in part by the National Science Foundation. Portions of the GateD

L. S. Associates.

Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United

States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other

trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,

transfer, or otherwise revise this publication without notice.

Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are

owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312,

6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.

Network and Security Manager Configuring Secure Access Devices Guide

Release 2010.4

Revision History

18 November 2010 —01

The information in this document is current as of the date listed in the revision history.

YEAR 2000 NOTICE

Juniper Networks hardware and software products are Year 2000 compliant. The Junos OS has no known time-related limitations through

the year 2038. However, the NTP application is known to have some difficulty in the year 2036.

END USER LICENSE AGREEMENT

READ THIS END USER LICENSE AGREEMENT (“AGREEMENT”) BEFORE DOWNLOADING, INSTALLING, OR USING THE SOFTWARE.

BY DOWNLOADING, INSTALLING, OR USING THE SOFTWARE OR OTHERWISE EXPRESSING YOUR AGREEMENT TO THE TERMS

CONTAINED HEREIN, YOU (AS CUSTOMER OR IF YOU ARE NOT THE CUSTOMER, AS A REPRESENTATIVE/AGENT AUTHORIZED TO

BIND THE CUSTOMER) CONSENT TO BE BOUND BY THIS AGREEMENT. IF YOU DO NOT OR CANNOT AGREE TO THE TERMS CONTAINED

HEREIN, THEN (A) DO NOT DOWNLOAD, INSTALL, OR USE THE SOFTWARE, AND (B) YOU MAY CONTACT JUNIPER NETWORKS

REGARDING LICENSE TERMS.

1. The Parties. The parties to this Agreement are (i) Juniper Networks, Inc. (if the Customer’s principal office is located in the Americas) or

Juniper Networks (Cayman) Limited (if the Customer’s principal office is located outside the Americas) (such applicable entity being referred

to herein as “Juniper”), and (ii) the person or organization that originally purchased from Juniper or an authorized Juniper reseller the applicable

license(s) for use of the Software (“Customer”) (collectively, the “Parties”).

2. The Software. In this Agreement, “Software” means the program modules and features of the Juniper or Juniper-supplied software, for

which Customer has paid the applicable license or support fees to Juniper or an authorized Juniper reseller, or which was embedded by

Juniper in equipment which Customer purchased from Juniper or an authorized Juniper reseller. “Software” also includes updates, upgrades

and new releases of such software. “Embedded Software” means Software which Juniper has embedded in or loaded onto the Juniper

equipment and any updates, upgrades, additions or replacements which are subsequently embedded in or loaded onto the equipment.

3. License Grant. Subject to payment of the applicable fees and the limitations and restrictions set forth herein, Juniper grants to Customer

a non-exclusive and non-transferable license, without right to sublicense, to use the Software, in executable form only, subject to the

following use restrictions:

a. Customer shall use Embedded Software solely as embedded in, and for execution on, Juniper equipment originally purchased by

Customer from Juniper or an authorized Juniper reseller.

b. Customer shall use the Software on a single hardware chassis having a single processing unit, or as many chassis or processing units

for which Customer has paid the applicable license fees; provided, however, with respect to the Steel-Belted Radius or Odyssey Access

Client software only, Customer shall use such Software on a single computer containing a single physical random access memory space

and containing any number of processors. Use of the Steel-Belted Radius or IMS AAA software on multiple computers or virtual machines

(e.g., Solaris zones) requires multiple licenses, regardless of whether such computers or virtualizations are physically contained on a single

chassis.

c. Product purchase documents, paper or electronic user documentation, and/or the particular licenses purchased by Customer may

specify limits to Customer’s use of the Software. Such limits may restrict use to a maximum number of seats, registered endpoints, concurrent

users, sessions, calls, connections, subscribers, clusters, nodes, realms, devices, links, ports or transactions, or require the purchase of

separate licenses to use particular features, functionalities, services, applications, operations, or capabilities, or provide throughput,

performance, configuration, bandwidth, interface, processing, temporal, or geographical limits. In addition, such limits may restrict the use

of the Software to managing certain kinds of networks or require the Software to be used only in conjunction with other specific Software.

Customer’s use of the Software shall be subject to all such limitations and purchase of all applicable licenses.

d. For any trial copy of the Software, Customer’s right to use the Software expires 30 days after download, installation or use of the

Software. Customer may operate the Software after the 30-day trial period only if Customer pays for a license to do so. Customer may not

extend or create an additional trial period by re-installing the Software after the 30-day trial period.

e. The Global Enterprise Edition of the Steel-Belted Radius software may be used by Customer only to manage access to Customer’s

enterprise network. Specifically, service provider customers are expressly prohibited from using the Global Enterprise Edition of the

Steel-Belted Radius software to support any commercial network access services.

The foregoing license is not transferable or assignable by Customer. No license is granted herein to any user who did not originally purchase

the applicable license(s) for the Software from Juniper or an authorized Juniper reseller.

4. Use Prohibitions. Notwithstanding the foregoing, the license provided herein does not permit the Customer to, and Customer agrees

not to and shall not: (a) modify, unbundle, reverse engineer, or create derivative works based on the Software; (b) make unauthorized

copies of the Software (except as necessary for backup purposes); (c) rent, sell, transfer, or grant any rights in and to any copy of the

Software, in any form, to any third party; (d) remove any proprietary notices, labels, or marks on or in any copy of the Software or any product

in which the Software is embedded; (e) distribute any copy of the Software to any third party, including as may be embedded in Juniper

equipment sold in the secondhand market; (f) use any ‘locked’ or key-restricted feature, function, service, application, operation, or capability

without first purchasing the applicable license(s) and obtaining a valid key from Juniper, even if such feature, function, service, application,

operation, or capability is enabled without a key; (g) distribute any key for the Software provided by Juniper to any third party; (h) use the

Software in any manner that extends or is broader than the uses purchased by Customer from Juniper or an authorized Juniper reseller; (i)

use Embedded Software on non-Juniper equipment; (j) use Embedded Software (or make it available for use) on Juniper equipment that

the Customer did not originally purchase from Juniper or an authorized Juniper reseller; (k) disclose the results of testing or benchmarking

of the Software to any third party without the prior written consent of Juniper; or (l) use the Software in any manner other than as expressly

provided herein.

5. Audit. Customer shall maintain accurate records as necessary to verify compliance with this Agreement. Upon request by Juniper,

Customer shall furnish such records to Juniper and certify its compliance with this Agreement.

6. Confidentiality. The Parties agree that aspects of the Software and associated documentation are the confidential property of Juniper.

As such, Customer shall exercise all reasonable commercial efforts to maintain the Software and associated documentation in confidence,

which at a minimum includes restricting access to the Software to Customer employees and contractors having a need to use the Software

for Customer’s internal business purposes.

7. Ownership. Juniper and Juniper’s licensors, respectively, retain ownership of all right, title, and interest (including copyright) in and to

the Software, associated documentation, and all copies of the Software. Nothing in this Agreement constitutes a transfer or conveyance

of any right, title, or interest in the Software or associated documentation, or a sale of the Software, associated documentation, or copies

of the Software.

8. Warranty, Limitation of Liability, Disclaimer of Warranty. The warranty applicable to the Software shall be as set forth in the warranty

statement that accompanies the Software (the “Warranty Statement”). Nothing in this Agreement shall give rise to any obligation to support

the Software. Support services may be purchased separately. Any such support shall be governed by a separate, written support services

agreement. TO THE MAXIMUM EXTENT PERMITTED BY LAW, JUNIPER SHALL NOT BE LIABLE FOR ANY LOST PROFITS, LOSS OF DATA,

OR COSTS OR PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES

ARISING OUT OF THIS AGREEMENT, THE SOFTWARE, OR ANY JUNIPER OR JUNIPER-SUPPLIED SOFTWARE. IN NO EVENT SHALL JUNIPER

BE LIABLE FOR DAMAGES ARISING FROM UNAUTHORIZED OR IMPROPER USE OF ANY JUNIPER OR JUNIPER-SUPPLIED SOFTWARE.

EXCEPT AS EXPRESSLY PROVIDED IN THE WARRANTY STATEMENT TO THE EXTENT PERMITTED BY LAW, JUNIPER DISCLAIMS ANY

AND ALL WARRANTIES IN AND TO THE SOFTWARE (WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE), INCLUDING ANY

IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. IN NO EVENT DOES

JUNIPER WARRANT THAT THE SOFTWARE, OR ANY EQUIPMENT OR NETWORK RUNNING THE SOFTWARE, WILL OPERATE WITHOUT

ERROR OR INTERRUPTION, OR WILL BE FREE OF VULNERABILITY TO INTRUSION OR ATTACK. In no event shall Juniper’s or its suppliers’

or licensors’ liability to Customer, whether in contract, tort (including negligence), breach of warranty, or otherwise, exceed the price paid

by Customer for the Software that gave rise to the claim, or if the Software is embedded in another Juniper product, the price paid by

Customer for such other product. Customer acknowledges and agrees that Juniper has set its prices and entered into this Agreement in

reliance upon the disclaimers of warranty and the limitations of liability set forth herein, that the same reflect an allocation of risk between

the Parties (including the risk that a contract remedy may fail of its essential purpose and cause consequential loss), and that the same

form an essential basis of the bargain between the Parties.

9. Termination. Any breach of this Agreement or failure by Customer to pay any applicable fees due shall result in automatic termination

of the license granted herein. Upon such termination, Customer shall destroy or return to Juniper all copies of the Software and related

documentation in Customer’s possession or control.

10. Taxes. All license fees payable under this agreement are exclusive of tax. Customer shall be responsible for paying Taxes arising from

the purchase of the license, or importation or use of the Software. If applicable, valid exemption documentation for each taxing jurisdiction

shall be provided to Juniper prior to invoicing, and Customer shall promptly notify Juniper if their exemption is revoked or modified. All

payments made by Customer shall be net of any applicable withholding tax. Customer will provide reasonable assistance to Juniper in

connection with such withholding taxes by promptly: providing Juniper with valid tax receipts and other required documentation showing

Customer’s payment of any withholding taxes; completing appropriate applications that would reduce the amount of withholding tax to

be paid; and notifying and assisting Juniper in any audit or tax proceeding related to transactions hereunder. Customer shall comply with

all applicable tax laws and regulations, and Customer will promptly pay or reimburse Juniper for all costs and damages related to any

liability incurred by Juniper as a result of Customer’s non-compliance or delay with its responsibilities herein. Customer’s obligations under

this Section shall survive termination or expiration of this Agreement.

11. Export. Customer agrees to comply with all applicable export laws and restrictions and regulations of any United States and any

applicable foreign agency or authority, and not to export or re-export the Software or any direct product thereof in violation of any such

restrictions, laws or regulations, or without all necessary approvals. Customer shall be liable for any such violations. The version of the

Software supplied to Customer may contain encryption or other capabilities restricting Customer’s ability to export the Software without

an export license.

12. Commercial Computer Software. The Software is “commercial computer software” and is provided with restricted rights. Use,

duplication, or disclosure by the United States government is subject to restrictions set forth in this Agreement and as provided in DFARS

227.7201 through 227.7202-4, FAR 12.212, FAR 27.405(b)(2), FAR 52.227-19, or FAR 52.227-14(ALT III) as applicable.

13. Interface Information. To the extent required by applicable law, and at Customer's written request, Juniper shall provide Customer

with the interface information needed to achieve interoperability between the Software and another independently created program, on

payment of applicable fee, if any. Customer shall observe strict obligations of confidentiality with respect to such information and shall use

such information in compliance with any applicable terms and conditions upon which Juniper makes such information available.

14. Third Party Software. Any licensor of Juniper whose software is embedded in the Software and any supplier of Juniper whose products

or technology are embedded in (or services are accessed by) the Software shall be a third party beneficiary with respect to this Agreement,

and such licensor or vendor shall have the right to enforce this Agreement in its own name as if it were Juniper. In addition, certain third party

software may be provided with the Software and is subject to the accompanying license(s), if any, of its respective owner(s). To the extent

portions of the Software are distributed under and subject to open source licenses obligating Juniper to make the source code for such

portions publicly available (such as the GNU General Public License (“GPL”) or the GNU Library General Public License (“LGPL”)), Juniper

will make such source code portions (including Juniper modifications, as appropriate) available upon request for a period of up to three

years from the date of distribution. Such request can be made in writing to Juniper Networks, Inc., 1194 N. Mathilda Ave., Sunnyvale, CA

94089, ATTN: General Counsel. You may obtain a copy of the GPL at http://www.gnu.org/licenses/gpl.html, and a copy of the LGPL

at http://www.gnu.org/licenses/lgpl.html .

15. Miscellaneous. This Agreement shall be governed by the laws of the State of California without reference to its conflicts of laws

principles. The provisions of the U.N. Convention for the International Sale of Goods shall not apply to this Agreement. For any disputes

arising under this Agreement, the Parties hereby consent to the personal and exclusive jurisdiction of, and venue in, the state and federal

courts within Santa Clara County, California. This Agreement constitutes the entire and sole agreement between Juniper and the Customer

with respect to the Software, and supersedes all prior and contemporaneous agreements relating to the Software, whether oral or written

(including any inconsistent terms contained in a purchase order), except that the terms of a separate written agreement executed by an

authorized Juniper representative and Customer shall govern to the extent such terms are inconsistent or conflict with terms contained

herein. No modification to this Agreement nor any waiver of any rights hereunder shall be effective unless expressly assented to in writing

by the party to be charged. If any portion of this Agreement is held invalid, the Parties agree that such invalidity shall not affect the validity

of the remainder of this Agreement. This Agreement and associated documentation has been written in the English language, and the

Parties agree that the English version will govern. (For Canada: Les parties aux présentés confirment leur volonté que cette convention de

même que tous les documents y compris tout avis qui s'y rattaché, soient redigés en langue anglaise. (Translation: The parties confirm that

this Agreement and all related documentation is and will be in the English language)).

Table of Contents

AboutThisGuide.................................................xiii

Objectives.........................................................xiii

Audience..........................................................xiii

DocumentConventions..............................................xiii

ListofTechnicalPublications..........................................xv

RequestingTechnicalSupport........................................xvi

Self-Help Online Tools and Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

OpeningaCasewithJTAC........................................xvi

Part 1 Getting Started

Chapter 1 Understanding Secure Access Device Configuration . . . . . . . . . . . . . . . . . . . . 3

NSM and Secure Access Device Management Overview . . . . . . . . . . . . . . . . . . . . . 3

Communication Between a Secure Access Device and NSM Overview . . . . . . . . . 3

Secure Access Device Services and Device Configurations Supported in NSM . . . . 5

Chapter 2 Secure Access Device and NSM Installation Overview . . . . . . . . . . . . . . . . . . . 7

Secure Access Device Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

NSMInstallationOverview.............................................7

Part 2 Integrating Secure Access Devices

Chapter3 AddingSecureAccessDevices.......................................11

ImportingaSecureAccessDevice......................................11

Installing and Configuring a Secure Access Device . . . . . . . . . . . . . . . . . . . . . . 11

Adding a Secure Access Device Through NSM . . . . . . . . . . . . . . . . . . . . . . . . . 12

Configuring and Activating the NSM agent on the Secure Access Device . . . . 13

Confirming Connectivity and Importing the Secure Access Device

Configuration ...............................................14

Requirements for Importing a Secure Access Device into NSM Through a

ReachableWorkflow.............................................14

Adding a Secure Access Device Through a Reachable Workflow . . . . . . . . . . . . . . 15

Importing Multiple Secure Access Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

CreatingtheCSVFile.............................................16

ValidatingtheCSVFile............................................17

Adding and Importing Multiple Secure Access Devices . . . . . . . . . . . . . . . . . . 18

Verifying Imported Device Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

UsingDeviceMonitor.............................................19

UsingDeviceManager............................................19

UsingJobManager..............................................20

UsingConfigurationSummaries...................................20

Chapter4 AddingSecureAccessClusters.....................................23

Adding a Secure Access Cluster Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Adding a Secure Access Cluster with Imported Cluster Members . . . . . . . . . . . . . 24

Installing and Configuring the Cluster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

AddingtheClusterinNSM........................................25

AddingtheClusterMembersinNSM................................25

Configuring and Activating the DMI Agent on the Cluster . . . . . . . . . . . . . . . . 27

ImportingClusterConfiguration....................................27

Chapter 5 Working with Secure Access Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Creating and Applying a Secure Access Device Template . . . . . . . . . . . . . . . . . . . 29

CreatingtheTemplate...........................................29

ApplyingtheTemplate...........................................30

Promoting a Secure Access Device Configuration to a Template . . . . . . . . . . . . . . 31

Part 3 Configuring Secure Access Devices

Chapter 6 Configuring User Roles and Administrator Roles . . . . . . . . . . . . . . . . . . . . . . 35

Configuring Secure Access Device User Roles (NSM Procedure) . . . . . . . . . . . . . 35

Creating Secure Access Role-Based Source IP Alias (NSM Procedure) . . . . . . . . 38

Configuring Secure Access General Session Options (NSM Procedure) . . . . . . . . 39

Creating and Configuring Secure Access Device Administrator Roles (NSM

Procedure) ....................................................43

Chapter 7 Configuring Terminal Services Using Remote Access Mechanism . . . . . . . . 51

TerminalServicesOverview...........................................51

Configuring Terminal Services on a Secure Access Device User Role (NSM

Procedure).....................................................52

TerminalServicesUserExperience.....................................61

TerminalServicesExecution..........................................62

Chapter 8 Configuring Access Options using Remote Access Mechanisms . . . . . . . . 65

Configuring Access Options using Remote Access Mechanisms Overview . . . . . 65

Configuring File Rewriting on a Secure Access Device User Role (NSM

Procedure) ....................................................66

Configuring Network Connect on a Secure Access Device User Role (NSM

Procedure) ....................................................69

Configuring Secure Application Manager on a Secure Access Device User Role

(NSMProcedure)...............................................74

Configuring Secure Meeting on a Secure Access Device User Role (NSM

Procedure).....................................................79

Configuring Web Rewriting on a Secure Access Device User Role (NSM

Procedure) ....................................................84

Configuring Telnet/SSH on a Secure Access Device User Role (NSM

Procedure) ....................................................90

Chapter 9 Configuring Secure Access Resource Profiles . . . . . . . . . . . . . . . . . . . . . . . . . 93

Configuring a JSAM Resource Profile (NSM Procedure) . . . . . . . . . . . . . . . . . . . . . 93

Configuring a Citrix Terminal Services (Custom ICA) Resource Profile (NSM

Procedure) ....................................................95

Configuring Secure Access Devices Guide

Configuring a Citrix Terminal Services (Default ICA) Resource Profile (NSM

Procedure) ....................................................99

Configuring a Citrix Listed Application Resource Profile (NSM Procedure) . . . . . 104

Configuring Citrix Web Applications Resource Profile (NSM Procedure) . . . . . . . 110

Configuring Custom Web Applications Resource Profile (NSM Procedure) . . . . . 112

Configuring File Rewriting Resource Profiles (NSM Procedure) . . . . . . . . . . . . . . 120

Configuring Windows Terminal Services (NSM Procedure) . . . . . . . . . . . . . . . . . 124

Configuring a Telnet/SSH Resource Profile (NSM Procedure) . . . . . . . . . . . . . . . 129

Configuring WSAM Resource Profile (NSM Procedure) . . . . . . . . . . . . . . . . . . . . . 131

Configuring Bookmarks for Virtual Desktop Resource Profiles (NSM

Procedure)....................................................134

Chapter 10 Configuring Secure Access Resource Policies . . . . . . . . . . . . . . . . . . . . . . . . 137

Configuring a File Rewriting Resource Policy (NSM Procedure) . . . . . . . . . . . . . . 137

Configuring a Secure Application Manager Resource Policy (NSM

Procedure)....................................................144

Configuring a Telnet and Secure Shell Resource Policy (NSM Procedure) . . . . . 146

Configuring a Terminal Service Resource Policy (NSM Procedure) . . . . . . . . . . . 149

Configuring Web Rewriting Resource Policies (NSM Procedure) . . . . . . . . . . . . . 151

Configuring a Network Connect Connection Profile Resource Policy (NSM

Procedure)....................................................155

Defining Network Connect Split Tunneling Policies (NSM Procedure) . . . . . . . . 159

Chapter 11 Configuring Authentication and Directory Servers . . . . . . . . . . . . . . . . . . . . . 161

Configuring a Secure Access ACE Server Instance (NSM Procedure) . . . . . . . . . . 161

Creating a Custom Expression for an Authentication Server (NSM

Procedure)....................................................163

Configuring a Secure Access Local Authentication Server Instance (NSM

Procedure)....................................................164

Configuring a Secure Access LDAP Server Instance (NSM Procedure) . . . . . . . . 167

Configuring a Secure Access RADIUS Server Instance (NSM Procedure) . . . . . . . 171

Configuring a Secure Access Anonymous Server Instance (NSM Procedure) . . . 174

Configuring a Secure Access eTrust SiteMinder Server Instance (NSM

Procedure) ....................................................174

Configuring a Secure Access Certificate Server Instance (NSM Procedure) . . . . 184

Configuring a Secure Access Manual CA Certificate (NSM Procedure) . . . . . . . . 185

Configuring a Secure Access SAML Server Instance (NSM Procedure) . . . . . . . . 188

Configuring a Secure Access Active Directory or NT Domain Instance (NSM

Procedure)....................................................190

Configuring a Secure Access NIS Server Instance (NSM Procedure) . . . . . . . . . . 193

Chapter 12 Configuring Authentication Realms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

Configuring Secure Access Authentication Realms (NSM Procedure) . . . . . . . . 195

Configuring Secure Access Authentication Policies (NSM Procedure) . . . . . . . . 198

Configuring Secure Access Role Mapping Rules (NSM Procedure) . . . . . . . . . . . 203

Chapter 13 Configuring Sign-in Policies and Sign-in Pages . . . . . . . . . . . . . . . . . . . . . . 207

Configuring Secure Access Sign-In Policies (NSM Procedure) . . . . . . . . . . . . . . 207

Creating Authorization-Only Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207

Creating User or Administrator URLs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

Table of Contents

CreatingMeetingURLs..........................................210

Configuring Secure Access Sign-In Pages (NSM Procedure) . . . . . . . . . . . . . . . . . 211

Creating Users/Administrator Sign-in Pages . . . . . . . . . . . . . . . . . . . . . . . . . . 211

CreatingMeetingSign-inPages...................................213

Chapter14 ConfiguringSingleSign-On........................................217

Defining Basic, NTLM, and Kerberos Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . 217

Configuring Basic, NTLM, and Kerberos Resources (NSM Procedure) . . . . . . . . . 218

Defining a Basic Authentication, NTLM, or Kerberos Intermediation Resource

Policy(NSMProcedure).........................................221

Configuring a SAML Access Control Resource Policy (NSM Procedure) . . . . . . . 223

Configuring SAML SSO Artifact Profile Resource Policy (NSM Procedure) . . . . . 226

Chapter 15 Configuring Secure Access Host Checker Policies . . . . . . . . . . . . . . . . . . . . . 231

Setting Up Secure Access Device Host Checker Options (NSM Procedure) . . . . 231

Configuring General Host Checker Remediation (NSM Procedure) . . . . . . . . . . . 233

Configuring Host Checker Third-Party Applications Using Predefined Rules (NSM

Procedure) ...................................................234

Configuring the Remote Integrity Measurement Verifier Server (NSM

Procedure) ...................................................240

Configuring Host Checker Customized Requirements Using Custom Rules (NSM

Procedure)....................................................241

Enabling Advanced Endpoint Defense (NSM Procedure) . . . . . . . . . . . . . . . . . . 246

Enabling Predefined Client-Side Policies for Windows Only (NSM

Procedure)....................................................247

Enabling Connection Control Policies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 247

Configuring Virus Signature Version Monitoring (NSM Procedure) . . . . . . . . . . . 248

Importing Virus Signature Version Monitoring or Patch Management Version

MonitoringList(NSMProcedure).................................249

Assigning a Proxy Server an Auto-Update Server (NSM Procedure) . . . . . . . . . . 250

Chapter 16 Configuring Secure Access Cache Cleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . 251

Configuring Global Cache Cleaner Options (NSM Procedure) . . . . . . . . . . . . . . . 251

Configuring Cache Cleaner Restrictions (NSM Procedure) . . . . . . . . . . . . . . . . . 254

Chapter 17 Configuring Secure Access System Management Features . . . . . . . . . . . . 257

Configuring the Network Communications Protocol (NSM Procedure) . . . . . . . 257

Configuring Secure Meetings (NSM Procedure) . . . . . . . . . . . . . . . . . . . . . . . . . . 259

Configuring Global Security (NSM Procedure) . . . . . . . . . . . . . . . . . . . . . . . . . . . 261

Configuring Sensors (NSM Procedure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 265

Creating a Custom Expression for Sensor Settings (NSM Procedure) . . . . . . . . 268

Chapter 18 Configuring Network Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271

Configuring General Network Settings (NSM Procedure) . . . . . . . . . . . . . . . . . . . 271

Configuring Internal Ports (NSM Procedure) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273

ConfiguringHosts(NSMProcedure)...................................275

Configuring Internet Protocol Filters (NSM Procedure) . . . . . . . . . . . . . . . . . . . . 276

Chapter19 SynchronizingUserRecords.......................................277

Enabling User Record Synchronization (NSM Procedure) . . . . . . . . . . . . . . . . . . 278

Configuring the Authentication Server (NSM Procedure) . . . . . . . . . . . . . . . . . . 279

Configuring Secure Access Devices Guide

Otros manuales para NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV...

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Software de Juniper

Juniper

Juniper ADVANCED INSIGHT SCRIPTS 2.5 - S REV 1 Manual de instrucciones

Juniper

Juniper JUNOSE SOFTWARE 11.2.X - SYSTEM EVENT LOGGING ... Manual de usuario

Juniper

Juniper MEDIA FLOW PUBLISHER Manual de usuario

Juniper

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - ADAPTIVE LOG EXPORTER... Manual de usuario

Juniper

Juniper NETWORKS STRM - TECHNICAL NOTE REV 6-2008 Manual de usuario

Juniper

Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M... Manual de instalación

Juniper

Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - QUALITY OF SERVICE CONFIGURATION GUIDE... Manual de usuario

Juniper

Juniper BXOS 4.1 R2 - S 07-2010 Manual de instrucciones

Juniper

Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE... Manual de usuario

Juniper

Juniper POLICY MANAGEMENT - CONFIGURATION GUIDE... Manual de usuario

Juniper

Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP-IPV6-IGP CONFIGURATION GUIDE... Manual de usuario

Juniper

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV... Manual de instrucciones

Juniper

Juniper JUNOSE 10.0.X PHYSICAL LAYER Manual de usuario

Juniper

Juniper JUNOSE SOFTWARE 11.0.1 - S 7-14-2010 Manual de instrucciones

Juniper

Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INTRUSION DETECTION PREVENTION DEVICES GUIDE REV... Manual de usuario

Juniper

Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - LINK LAYER CONFIGURATION GUIDE... Manual de usuario

Juniper

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - CATEGORY OFFENSE INVESTIGATION GUIDE REV... Manual de usuario

Juniper

Juniper JUNOSE 10.0.3 - S 4-30-2010 Manual de instrucciones

Juniper

Juniper JUNOS OS 10.4 - S REV 5 Manual de instrucciones

Juniper

Juniper MEDIA FLOW MANAGER 2.0.2 - ADMINISTRATOR S GUIDE AND... Manual de servicio

Juniper

Juniper SECURITY THREAT RESPONSE MANAGER 2008.2 - MANAGING VULNERABILITY ASSESSMENT... Manual de usuario

Juniper

Juniper NETWORK AND SECURITY MANAGER 2010.4 - ADMININISTRATION GUIDE... Manual de instrucciones

Juniper

Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - IP SERVICES CONFIGURATION GUIDE... Manual de usuario

Juniper

Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - POLICY MANAGEMENT CONFIGURATION GUIDE... Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

HP ProLiant BL420c Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario