JAGER PRO M.I.N.E. CAM Manual de usuario
1
2
WARRANTY
Limited Warranty: JAGER PRO, LLC warrants the Product to be free from malfunctions
and defects in both materials and workmanship for one (1) year from the date of purchase
(“Warranty Period”). JAGER PRO, LLC will repair or replace, at its option, the Product if
it fails to function properly during the Warranty Period, subject to the conditions and/or
limitations stated herein. Such repair or replacement is your sole remedy under this Limited
Warranty.
Limitations: Limited Warranty service will not be provided unless the Product, returned in
the manner set forth below, is accompanied by a copy of your original dated sales invoice.
JAGER PRO, LLC reserves the right to require you to provide your original dated sales
invoice. Products purchased from non-authorized dealers may not qualify for warranty
coverage.
Repair & Service: Please contact our Trapping Support department at 1-706-718-9789 (EXT
may be required prior to authorization for warranted repair services. If service is
recommended for your product, additional instructions will be provided. Additional terms
and conditions may apply. If it is determined that your product does not qualify for warranty
coverage, the following charges may or may not apply: Labor Hours, Parts, Materials,
Estimate Services, Shipping and Handling.
This Limited Warranty does not cover the following:
a. any defect in or damage to the Product that occurs due to mishandling of the Product;
b. any defect in or damage to the Product that occurs due to repair, modication, or other
similar activity after your purchase of the Product;
c. any defect in or damage to the Product that occurs due to the transport, dropping, shock,
or other similar activity after your purchase of the Product;
d. any defect in or damage to the Product that occurs due to careless or improper storage,
or improper use or maintenance of the Product;
e. any defect in or damage to the Product that occurs due to foreign objects such as dirt or
grime, sand, water or liquids entering the inside of the Product; and
f. any defect to the Product related to your failure to follow proper operating instructions
provided by JAGER PRO, LLC, claims made after the Warranty Period, or your failure to
follow the instructions set forth below with respect to return of the Product to JAGER PRO,
LLC.
All other express and implied warranties for the product, including the implied warranties of
merchantability and tness for a particular purpose are hereby disclaimed. JAGER PRO,
LLC expressly disclaims all warranties not stated in this warranty. Any implied warranties
that may be imposed by law are limited in duration to the terms of this express limited
warranty. Some jurisdictions do not allow the exclusion of implied warranties or limitations
on how long an implied warranty lasts, so the above exclusions or limitations may not
apply to you. In no event will JAGER PRO, LLC be liable to you, or any third party, for any
damages in excess of the purchase price of the product. In addition, JAGER PRO,LLC shall
in no event be liable to you, or any third party, for any direct or indirect damages or other
special, incidental, exemplary or consequential damages arising out of the use or inability to
use the product. Some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages for some products, so the exclusions or limitations may not apply to
you. This limited warranty gives you specic legal rights, and you may also have other rights
which may vary from jurisdiction to jurisdiction.
Notwithstanding any terms of this Limited Warranty to the contrary, no warranty coverage
shall be provided for a Product purchased from, through, or with the assistance or
involvement of any Internet auction web site. JAGER PRO, LLC reserves the right to modify
its warranties prospectively at any time, in its sole discretion.
3
TABLE OF CONTENTS
Camera Characteristics................................................ 04
Getting Started..............................................................07
Initial SD Card Programming........................................ 07
Main Menu Tabs............................................................13
CAM Tab....................................................................... 14
PIR Tab......................................................................... 14
GSM Tab.......................................................................15
SYS Tab........................................................................17
Camera Quick Setup.....................................................17
SMS Command Codes................................................. 19
Care and Maintenance................................................. 20
Accessories.................................................................. 21
Purchasing a SIM Card.................................................22
Replenishing a SIM Card..............................................22
Glossary........................................................................23
WARNING: Never mount the M.I.N.E.™ Cam on the same
T-Post securing a trap panel or severe damage may result.
Always mount the M.I.N.E.™ Cam on a separate T-Post at
least 10 inches outside the trap enclosure.
4
Front View
CAMERA CHARACTERISTICS
1
23
4
5
2
6
66
1. Antenna: Standard antenna shown receives cell tower
signals. Our 5 decibel booster antenna is available as an
accessory for operation in low signal areas.
2. IR Illuminators: Twin banks using 52 infrared LEDs that
illuminate the target area when camera functions at night.
3. Camera Lens: The camera lens has a 52 degree eld of
view with no magnication. This enables users to observe a
20’ eld of view measured 15’ from the lens and a 32’ eld of
view when measured 21’ from the lens.
4. PIR Sensor: Passive Infrared motion detector. Senses
the presence of a moving object which triggers the camera to
take a photo or record a video.
5. Ambient Light Sensor: Detects surrounding light to
automatically control day and night camera functions. This
sensor also emits a red, blinking LED when the selector switch
is moved to SETUP. The LED will stop blinking within 10
seconds after the selector switch is moved from SETUP to ON
indicating the camera is operational and active.
6. Locking Latches (3 each): Secures the camera front
housing to the main body housing while providing a waterproof
seal to internal components.
5
1. SD Card Port: Slot for receiving an SD card. The camera
has no internal memory. An SD card smaller than 32GB must
be used to store photos, video and GSM data.
2. USB Port: Standard USB cable connection interface to
transfer information between the camera and a computer.
3. Transmitter Port: Transmitter slot for wireless SMS
cellular control of the M.I.N.E™ Gate and control box.
4. SIM Card Port: Slot for receiving a cellular SIM card from
GSM network providers such as AT&T and T-Mobile.
Bottom Inside View
Bottom Outside View
1 2 3 4
1. Transmitter Port Plug: Waterproof seal to protect
internal components when transmitter is not in use.
2. Mounting Port: 1/4 x 20 internal threads for securing
camera to a T-Post mount. Only thread external devices two
complete rotations into the camera mounting port then tighten
using the mount’s adjusting nut. Forcing external threads to
the bottom will damage mounting port and camera housing.
12
6
Left Inside View
1. Antenna Port: Attachment point to install various antennas
depending on local cellular strength. Our 5 db booster antenna
is available as an accessory for operation in low signal areas.
2. Display: Screen to observe menus, photos and settings.
3. Selector Switch: Used to enter into any of the three
operating modes: OFF, SETUP and ON.
4. Menu Button: Used to select various camera options.
5. Move Left Button: Moves from the highlighted area to a
selection left.
6. Move Up Button: Moves from the highlighted area to a
selection above.
7. Move Right Button: Moves from the highlighted area to a
selection right.
8. Move Down Button: Moves from the highlighted area to a
selection below.
9. OK Button: Selects the highlighted item.
7
3
4
2
6
58
9
There are 4 main menu tabs; CAM, PIR, GSM and SYS.
• Press the ◄ or ► buttons to change tabs when highlighted
white. Press the ▲ or ▼ buttons to cycle through the tab
settings. Press ◄ or ► to select items with white highlights
to view the choices. Press OK to save the new setting which
will change the highlight to red. Press ▲ or ▼ to view the next
setting. Cycle to the top ▲ of the tab (no white highlights)
before able to cycle ◄ or ► to view or change another tab.
1
7
Battery Polarity Symbols: Located on the front of the
battery tray. Aids in proper battery polarity and installation.
Right Inside View
INITIAL SD CARD PROGRAMMING
We recommend an AT&T SIM card as their data package has
unlimited text and photo messaging for only $19.99 per month.
The camera was designed with this concept.
It does not matter which cellular company offers the best
coverage in your area. Verizon and Sprint network providers
use CDMA technology and the camera requires GSM
technology (AT&T or T-Mobile) to operate.
AT&T customer service representatives are not trained to
recognize a SIM card can function in a wireless camera. They
will debate this application is possible and deny such a plan
exists. Please take this manual to your local AT&T corporate
store and follow the steps on page 22 to successfully purchase
and replenish your AT&T SIM card.
1. Open the camera.
2. Insert an activated SIM card and formatted SD card into the
appropriate camera slots.
3. Move the selector switch from OFF to SETUP.
4. The screen will display Checking then Searching.
5. Press the MENU button during this connecting sequence.
GETTING STARTED
8
9. Open the SD card le and two folders should appear; DCIM
and GSMSETUP. Right-click on the GSMSETUP le and
choose “Extract All…”.
7. Press OK to SAVE the UOV Setup tool to the SD card. The
screen will revert back to the initial display.
8. Turn off the camera and eject the SD card. Insert it into a
computer SD card slot to program.
6. Using the arrow buttons, scroll right to the GSM tab. Then
scroll 2 clicks up until the Download Tool option is visible.
9
NOTE: Change the folder name by deleting GSMSETUP from
the text box. Only the drive letter of the SD card should remain
(see example below).
10. Click the “Extract” button.
11. The three items below should appear in the SD card le.
12. Double click on the “UOV Setup” le and the below screen
should appear.
10
• Send Mode
Instant: (Recommended) The camera sends a photo
immediately when it takes a photo. It will only send an SMS
text message of the sequence number when a video is taken
(Video: 3/99). The Max Num eld indicates the maximum
number of photos or texts allowed to be sent within 24 hours.
The camera resets to zero each night at 0000 hours.
Daily Report: Sends an SMS to tell how many photos and
videos were captured during the past 24 hours. In photo mode,
the SMS tells the accumulated picture quantity together with
the latest captured picture. In video mode, the SMS tells the
accumulated video quantity only.
Off: GSM function is de-activated. Photos and videos will not
be sent to a recipient but will be saved to the SD card.
• Send Via
MMS: (Recommended) The image will be sent by text
message. The image can be sent to a cell phone, email
account or both. When checked, a minimum of one phone
number and/or one email address needs to be entered as a
recipient depending on the Send To mode chosen.
GPRS: Allows the sending of pictures via Internet connection.
This requires a data plan on the SIM card account. The image
is sent to an email address only. When checked, a minimum of
one email address needs to be entered as a recipient. SMTP
parameters need to be set up by clicking Email Set.
• SMS Switch: The SMS Switch must be ON for the camera
to receive text commands from four listed phone numbers.
Tabla de contenidos
Otros manuales de Cámara de exploración de JAGER PRO
