J-Tech Digital JTD-416 Manual de usuario

JTD-416 | JTECH-KVE3

VGA KVM Extender over Ethernet

Introduction

The JTECH-KVE3 VGA KVM Extender is a bundled kit including both a local transmitter and a remote

receiver unit. The KVM extender offers a complete solution for scenarios in which remote monitor

displays are required and the ability to view and split your source VGA signal to two independent

displays is necessary. The JTECH-KVE3 allows you to extend your VGA video signal up to 985 feet

via standard CAT6 UTP cable. The JTECH-KVE3 also simultaneously transmits USB 2.0 high speed

data and control signals making it perfect for easily controlling your video source from your video

destination.

Features

* VGA video and KVM signals are transmitted over long distances (up to 985 feet) via Cat5/6

UTP network cable

* Supports high-definition video resolutions up to 1920 x 1080 and 1920 x 1200

* Supports remote keyboard & mouse signal transmission (2 x USB 2.0 ports at Receiver)

* VGA Standard Compliance

* Able to automatically identify and configure various display modes

* Built-in manual brightness and contrast settings for fine-tuning image quality

* Built-in ESD electrostatic protection circuit

* Simple and convenient “plug & play” installation

Package Contents

•J-Tech Digital JTECH-KVE3 (Transmitter + Receiver)

•2 x Power Adapter DC5V 1A

•4 x Mounting Brackets & Screws

Ports and Interfaces

① DC 5V: DC 5V Power Adapter In

② PC IN: Connect to PC Host in via USB-A to USB-B Cable

③ VGA IN: Connect to Input Source Device via VGA Male Cable

④ CAT5e/6: Connect to CAT5e/6 cable between transmitter and receiver

⑤ POWER: Power Status LED Indicator

⑥ VGA OUT: Connect to display via VGA Male Cable (Transmitter – Local Loop Out Display |

Receiver – Remote Out Display)

⑦ K/M: Connect to USB 2.0 peripheral devices such as keyboard, mouse, printer or USB storage

device

⑧

: Rotate dial to adjust the contrast

: Rotate dial to adjust the brightness

Transmitter

Receiver

Connection Diagram

Specifications

Note: Specifications are subject to change without notice.

Input Ports

VGA x 1 (DB15 Female) | USB-A x 2

Output Ports

VGA x 2 (DB15 Female) | USB-B x 1

Extension Distance

985 Feet (VGA & USB)

USB Transmission rate

480 Mbps

USB Standard

USB 2.0

Vertical Frequency Range

60 / 75 / 85Hz

Supported PC Resolutions

640 x 480 | 800 x 600 | 1024 x 768 | 1280 x 720 | 1280 x

768 | 1280 x 960 | 1280 x 1024 | 1600 x 900 | 1600 x 1200

| 1920 x 1080 | 1920 x 1200

Operating Temperature

32°F to 122°F

Storage Humidity

5% to 90% RH non-condensation

Power Supply

DC 5V 1A

Power Consumption (Max)

Transmitter - 1.5W | Receiver - 2.5W

Extender Unit Certification

FCC | CE | RoHS

Power Supply Certification

FCC | CE | RoHS

Dimensions (LxWxH)

3.72 x 2.75 x 0.98 in

Net Weight

Transmitter – 0.39 Lbs.| Receiver – 0.38 Lbs.

Material

Metal

Troubleshooting

Problem

Cause

Solution

Power LED is off and product

is not working

A power adapter is not

properly connected or VGA

source device is not on

Please check if the power

adapter is connected properly

and securely on both

transmitter and receiver.

Ensure the VGA source device

is powered on

Intermittent video signal or

noise/snow in image

VGA cable and CAT5e/6 may

not be in working condition or

the cable is too long

Please use standardized VGA

and UTP cable only. Cable

length should not exceed 49.2

FT (VGA) | 985 FT (UTP CAT6)

Connected USB storage device

is not working correctly

The external storage device

power consumption is higher

than 2.5W (5V 500mA)

Please use a storage device

with power consumption less

than 2.5W

Warranty

If your product does not work properly because of a defect in materials or workmanship, J-Tech

Digital (referred to as "the warrantor") will, for the length of the period indicated as below, (Parts

(1) Year, Labor (90) Days) which starts with the date of original purchase ("Limited Warranty

period"), at its option either(a) repair your product with new or refurbished parts, or (b) replace

it with a new of a refurbished product. The decision to repair or replace will be made by the

warrantor. During the "Labor" Limited Warranty period there will be no charge for labor. During

the "Parts" warranty period, there will be no charge for parts. You must mail-in your product

during the warranty period. This Limited Warranty is extended only to the original purchaser and

only covers product purchased as new. A purchase receipt or other proof of original purchase

date is required for Limited Warranty service.

Maintenance

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean this unit.

Product Service

1) Damage Requiring Service:

The unit should be serviced by qualified service personnel if:

(a) The DC power supply cord or AC adaptor has been damaged;

(b) Objects or liquids have gotten into the unit;

(d) The unit does not operate normally or exhibits a marked change in performance;

(e) The unit has been dropped or the cabinet damaged.

2) Servicing Personnel: Do not attempt to service the unit beyond that described in

these operating instructions. Refer all other servicing to authorized servicing personnel.

3) Replacement Parts: When parts need replacing ensure the servicer uses parts

specified by the manufacturer or parts that have the same characteristics as the

original parts. Unauthorized substitutes may result in fire, electric shock, or other

hazards.

4) Safety Check: After repairs or service, ask the servicer to perform safety checks to confirm that

the unit is in proper working condition.

Extended Warranty

With the registration of supported J-Tech Digital products, you extend the current warranty

by 6 months. This extension is added to the warranty that starts at the purchase date of

the device supported. Total product warranty with the extended period will equate to a

total of 18 months of warranty from the date of purchase.

For extended warranties to be accepted, all warranty extensions must be claimed within

30 days of purchasing the eligible J-Tech Digital product. Extensions attempted to be

claimed outside of the 30-day window will not be accepted.

J-Tech Digital Support Team

[email protected]

(888) 610 – 2818

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Extensor de J-Tech Digital

J-Tech Digital

J-Tech Digital JTECH-AET1000B Manual de usuario

J-Tech Digital

J-Tech Digital JTD-677 Manual de usuario

J-Tech Digital

J-Tech Digital JTD-2980 Manual de usuario

J-Tech Digital

J-Tech Digital JTD-3023 Manual de usuario

J-Tech Digital

J-Tech Digital JTD-611V3 Manual de usuario

J-Tech Digital

J-Tech Digital ARC-HDEX40ARC Manual de usuario

J-Tech Digital

J-Tech Digital ProAV Series Manual de usuario

J-Tech Digital

J-Tech Digital JTD-1263 Manual de usuario

J-Tech Digital

J-Tech Digital JTECH-VW-4KPR Manual de usuario

J-Tech Digital

J-Tech Digital JTD-2994 Manual de usuario

J-Tech Digital

J-Tech Digital JTECH-WEX-22 Manual de usuario

J-Tech Digital

J-Tech Digital JTECH-ex2 Manual de usuario

J-Tech Digital

J-Tech Digital JTECH-4K88-EX2 Manual de usuario

J-Tech Digital

J-Tech Digital JTECH-BE100 Manual de usuario

J-Tech Digital

J-Tech Digital JTD-190 Manual de usuario

J-Tech Digital

J-Tech Digital JTD-3033 Manual de usuario

J-Tech Digital

J-Tech Digital JTECH-EX230 Manual de usuario

J-Tech Digital

J-Tech Digital JTD-2865 Manual de usuario

J-Tech Digital

J-Tech Digital JTD-229 Manual de usuario

J-Tech Digital

J-Tech Digital JTECH-VW09 Manual de usuario

J-Tech Digital

J-Tech Digital UHDT150 Manual de usuario

J-Tech Digital

J-Tech Digital JTECH-HDBT73 Manual de usuario

J-Tech Digital

J-Tech Digital JTECH-EXBT460 Manual de usuario

J-Tech Digital

J-Tech Digital NA-EX01R Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario