Ipf electronic IV56E205-S Manual de usuario

MANUAL • Subject to alteration! Version: 07.01.2022

ipf electronic gmbh

│

Rosmarter Allee 14 • 58762 Altena • Germany

│

Tel +49 2351 9365-0 • info@ipf-electronic.com •www.ipf-electronic.com 1

IN32E332-S

Inductive proximity switsch

IV56E205-S

Amplifier

VKC0E333-S

Cable socket

Installation of the sensor

•The sensor IN32E332-S is an inductive proximity switch for non-flush mounting. Due to its construction,

the device only detects metallic objects.

•To achieve the nominal switching distance of 15mm (see technical data), must have the metal part

following properties: Material: ST37

Dimensions: 32mm x 32mm x 1mm

For other materials, the correction factors are listed in the technical data.

•The switching distance may deviate from the nominal value by ±20% due to component tolerances.

•Install the device in a way, that the plastic cap is not surrounded by metal. The lateral distance to metallic

objects must be at least 32mm.

•To avoid damaging the threaded sleeve during assembly, the tightening torque must not exceed 150 Nm.

•The device may be used in surroundings with temperatures up to 230°C.

Installation of the amplifier

•The amplifier IV56E205-S is to be used for the operation of the sensor IN32E332-S in connection with the

cable socket VKC0E333-S.

•The device is suitable for mounting on a DIN rail. Mounting must take place outside the dust-ex-area, e.g.

in a protected switch cabinet.

•The pnp switching output can be further processed with a PLC. The switching output has a switch-on delay

of 100ms.

Elektrical connection

Connection of the sensor to the amplifier via the

VKC0E333-S cable socket:

Connection of the operating voltage and the switching

output to the amplifier.

IMPORTANT:

•Switch off the operating voltage before connecting or disconnecting the amplifier!

•The cable socket may also only be plugged in or unplugged from the sensor when it is de-energized. An

appropriate waiting time (>10s) must be observed before pulling off.

•When plugging in the cable socket, make sure that, that it snaps securely into the connector of the sensor.

Clamp 4: brown (sensor power supply +3V)

Clamp 5: black (screen)

Clamp 6: blue (sensor power supply GND)

Clamp 9: + U

Clamp 8: switching output pnp, no, 400mA

Clamp 7: 0V (GND)

MANUAL • Subject to alteration! Version: 07.01.2022

ipf electronic gmbh

│

Rosmarter Allee 14 • 58762 Altena • Germany

│

Tel +49 2351 9365-0 • info@ipf-electronic.com •www.ipf-electronic.com 2

Technical data IV56E205-S IN32E332-S

Operating voltage U

7 to 35V DC

3V DC, through

amplifier IV56E205-S

Nominal Switching

distance (sn)

13mm

Hysteresis

3% bis 20% from sn

Nominal Switching

distance (sr)

±20%

Ampacity

400mA

Ambient temperature

-25 … +70°C

0 … +230°C

Protection class

(EN60529)

Housing IP 40,

Clamp IP 20

IP 67 with attached cable

socket

Housing material

Plastic

Sleeve: VA

Cap: Vectra

Design

22.5x75x110

Threaded device M32x1.5 Total

length 83.5mm

Mounting

On DIN rail

Connection

Clamp

Lemosa connector

Matching cable socket

VKC0E333-S

(30m line length)

Adjustment factors

VA approx. 0.7

Ms, Al approx. 0.4

Cu approx. 0.3

Dimensional drawing:

IV56E205-S IN32E332-S VKC0E333-S

SAFETY INSTRUCTIONS:

Before commissioning, please make sure that all safety instructions listed in the product documentation, if applicable, have been

observed!

In case of direct impact on personal safety, the use of these products is prohibited.

Este manual sirve para los siguientes modelos

Otros manuales de Accesorios de ipf electronic

ipf electronic

ipf electronic DW34311 Series Manual de usuario

ipf electronic

ipf electronic OT450521 Manual de usuario

ipf electronic

ipf electronic OT05E287 Manual de usuario

ipf electronic

ipf electronic RO570900 Manual de usuario

ipf electronic

ipf electronic OTQ90170 Manual de usuario

ipf electronic

ipf electronic OT059170 Manual de usuario

ipf electronic

ipf electronic OR150400 Manual de usuario

ipf electronic

ipf electronic OT330571 Manual de usuario

ipf electronic

ipf electronic UT360321 Manual de usuario

ipf electronic

ipf electronic ON330571 Manual de usuario

ipf electronic

ipf electronic OT0591A4 Manual de usuario

ipf electronic

ipf electronic OTR49174 Manual de usuario

ipf electronic

ipf electronic OS15 Series Manual de usuario

ipf electronic

ipf electronic MW10015 Series Manual de usuario

ipf electronic

ipf electronic OTR49175 Manual de usuario

ipf electronic

ipf electronic DW34312 Series Manual de usuario

ipf electronic

ipf electronic UT129521 Manual de usuario

ipf electronic

ipf electronic UT300027 Manual de usuario

ipf electronic

ipf electronic UT189020 Manual de usuario

ipf electronic

ipf electronic PY740020 Manual de usuario

ipf electronic

ipf electronic OTR49170 Manual de usuario

ipf electronic

ipf electronic UT990934 Manual de usuario

ipf electronic

ipf electronic UT139570 Manual de usuario

ipf electronic

ipf electronic opti-check OC5396 Series Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario

ipf electronic IV56E205-S Manual de usuario

Manuales populares de Accesorios de otras marcas