IOGear GWFRSDU Manual de usuario
MediaShair Wireless Media Hub
w/SD Card Slot & USB Port Plus Bulit-in Power Station
Quick Start Guide
GWFRSDU
PART NO. Q11240
www.iogear.com
1 2 34 5
6789
10
1
Package Contents
System Requirements
Overview
1 x MediaShair Wireless Media Hub
1 x USB to Micro-USB Cable
1 x Car Charger
• Wi-Fi equipped wireless devices
• SD card or external USB storage device with media content
• Mobile devices require either Android 3.0 & up or iOS 4.0 & up
• Wired or wireless network available for Internet connection when using optional
Access Point feature*
*The MediaShair Hub can connect to a wired or wireless local network and use the
built-in Access Point to share Wi-Fi Internet access to multiple wireless devices.
Requires an Ethernet cable for access to wired networks, or the pre-shared security
key for wireless networks.
1. Power button
2. Internet indicator
3. Wi-Fi indicator
Flashing Blue - Wi-Fi network restarting
Solid Blue - Wi-Fi network ready
4. SD card indicator
5. Battery charging indicator
Solid Green - Power on
Flashing Green - Media Hub is charging
Red - Battery low, recharge required
6. SD Card slot
7. Reset button
8. RJ-45 Ethernet port
9. USB port (also works as an emergency
charging port)
10. Micro USB charging input
1 x User Manual
1 x Warranty Card
MediaShair Mode / Powerstation Mode
Recharging the MediaShair Hub
2
MediaShair Mode:
MediaShair mode is the normal operating mode which enables all features and
functions of the device. The Powerstation mode (described in the next section) turns
on only the charging output, and keeps the rest of the unit functions off to save power.
To turn on the MediaShair Hub and begin streaming your stored content:
1. Press and hold the power button for 5 seconds to turn MediaShair Hub on.
2. The green LED battery indicator will turn on.
3. The blue Wi-Fi indicator will begin flashing then light solid to indicate network is
ready.
4. Connect to the MediaShair Wi-Fi network as shown for your device.
5. Press and hold power button for 5 seconds to turn MediaShair Hub off.
Powerstation Mode:
The MediaShair Hub has a built-in Powerstation mode that can provide a quick boost
to mobile devices such as smartphones or MP3 players in the event of an emergency.
Please note that using the Powerstation mode can severely shorten the playback time
when streaming media content.
If the MediaShair Hub is already on:
1. Plug the charging cable for your mobile device into the MediaShair Hub USB port.
2. The device will begin charging.
If the MediaShair Hub is off:
1. Plug the charging cable for your mobile device into the MediaShair Hub USB port.
2. Press the power button once to turn Powerstation feature on.
3. The green LED battery indicator will turn on and the device will begin charging.
4. When you are done charging, press the power button once to turn Powerstation
feature off.
Your new MediaShair Hub is shipped fully charged and ready to use out of the box.
When the battery indicator turns red, the unit must be recharged. Connect
the included USB car charger, or nearly any USB wall charger such as those
included with most smartphones and tablets. For convenience the MediaShair Hub
can also be charged from any computer USB port, but due to the lower charging
current of computer USB ports it may take longer to reach a full charge.
MediaShair
IOGEAR
MediaShair
MediaShair Setup (iPod / iPhone / iPad) 3
1. Open the App Store on your iPod, iPhone or iPad.
Search for the "MediaShair" app and download it
to your device.
2. After installation is complete, the
MediaShair App icon will be shown
on the device.
3. Press and hold the power button for 5 seconds to
turn on the MediaShair Hub.
4. Open the Settings menu on your device and
set Wi-Fi to ON.
5. Choose "MediaShair-xxxx" network.
6. Enter the default password "12345678" and tap Join to connect. Wi-Fi will display
MediaShair-xxxx (-xxxx is the last four digits of the device’s MAC ID).
HDD
or
USB Device
SD
SD Card
Viewing MediaShair Content (iPod / iPhone / iPad) 4
1. Insert a SD Card, USB Flash Drive or External Hard Drive with movies,
music, photos or files.
2. Make sure the “MediaShair-xxxx” Wi-Fi network is
connected.
3. On the Home screen, tap the My MediaShair
button to show the SD Card and/or USB
contents.
4. Tap the file you wish to access and playback will
begin automatically. Note: Only iOS supported
formats can be played.
5
Internet Connection (iPod / iPhone / iPad)
Option 1: Wired Connection
1. Connect an Ethernet cable from the
modem to the RJ-45 Ethernet connector
on the MediaShair Hub.
2. From the App Home screen, tap Settings.
RJ45 Connector
3. Select Internet Settings to bring up the option
for Wired Access (default) or Wireless
Access.
4. Select Wired Access and tap Set.
*To change security settings or set addtional
options, please see Full User Manual.
Password
6
1. Power button
2. Internet indicator
3. Wi-Fi indicator
Flashing Blue - Wi-Fi network restarting
Solid Blue - Wi-Fi network ready
4. SD card indicator
5. Battery charging indicator
Solid Green - Power on
Flashing Green - Media Hub is charging
Red - Battery low, recharge required
6. SD Card slot
7. Reset button
8. RJ-45 Ethernet port
9. USB port (also works as an emergency
charging port)
10. Micro USB charging input
Option 2: Wireless Connection
1. From the App Home screen, tap Settings.
2. Select Internet Access to bring up the
option for Wired Access (default) or
Wireless Access.
3. Select Wireless Access and tap Set.
4. Under “Configure your
Wi-Fi connection”
select a wireless
network and enter
the password (Insert
Pre-shared network
key), then tap Join to
connect.
7
Option 1: Device Name
To change the name of your MediaShair Hub:
1. Tap Device Name.
Option 2: Security Options
To change the security mode and/or pre-shared
security key:
1. Tap Security Options.
Wireless Security Settings
2. Enter the new name into the SSID box
then tap the Set button.
2. To change the Security Mode select the
desired security mode from the list then tap
the Set button or go to step 3 to change the
security key.
3. To change the pre-shared security key, enter
the new key into the box then tap the Set
button. The security key is case sensitive.
4. The Mediashair Hub will need to reboot to
apply the changes made. Hit the OK button
and reconnect to the Wi-Fi once it has
finished.
8
MediaShair Setup (Android Devices)
3. Press and hold the power button for 5 seconds to
turn on the MediaShair Hub.
1. Open the App Store on your Android device.
Search for the "MediaShair" app and
download it.
2. After installation is complete,
the MediaShair App icon will be
shown on the device.
4. Open the Settings menu on your
device and set Wi-Fi to ON.
5. Choose "MediaShair-xxxx" network.
6. Enter the default
password "12345678"
and tap Connect to
join. Wi-Fi will display
MediaShair-xxxx (-xxxx
is the last four digits of
the device’s MAC ID).
HDD
or
USB Device
SD
SD Card
9
Viewing MediaShair Content (Android)
1. Connect your USB Flash Drive or USB Hard Drive
to the standard USB port.
2. Make sure the “MediaShair-xxxx” Wi-Fi network is
connected.
3. On the Home screen, tap the My MediaShair
button to show the USB contents.
4. Tap the file you wish to access and playback will
begin automatically.
Otros manuales para GWFRSDU
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Cambiar de IOGear
IOGear
IOGear GCS1722 Manual de usuario
IOGear
IOGear GCL1908 Manual de usuario
IOGear
IOGear Gigalinq GUH3C34 Manual de usuario
IOGear
IOGear M1672 Manual de usuario
IOGear
IOGear GUS4C2 Manual de usuario
IOGear
IOGear GUWH104KIT Manual de usuario
IOGear
IOGear GCS1212TAA4 Manual de usuario
IOGear
IOGear MiniView Ultra+ GCS1758 Manual de usuario
IOGear
IOGear MiniView Micro Audio GCS614A Manual de usuario
IOGear
IOGear MiniView DVI-D KVM with audio and USB hub... Manual de usuario
IOGear
IOGear GCS1792 Manual de usuario
IOGear
IOGear GCS1102 Manual de usuario
IOGear
IOGear GCS22U Manual de usuario
IOGear
IOGear MiniView Micro Audio GCS614A Manual de usuario
IOGear
IOGear GCS932UB Manual de usuario
IOGear
IOGear GCS1932M Instrucciones de funcionamiento y mantenimiento
IOGear
IOGear MicroHub GUH274 Manual de usuario
IOGear
IOGear GCS1716 Manual de usuario
IOGear
IOGear GCS634U Manual de usuario
IOGear
IOGear MiniView GCS1772 Manual de usuario
