IOGear GCS62DP Manual de usuario

www.iogear.com

GCS62DP

PART NO. Q1391

Quick Start Guide

DisplayPort KVM

2-Port DisplayPort KVM Switch

Package Contents

Overview

1 x GCS62DP

2 x USB 2.0 A to B Cable

2 x 3.5mm Audio Cable

2 x DisplayPort Cable

1 x Port Selection Remote

1 x Quick Start Guide

1 x Warranty Card

System Requirements

Front

1. PC #2

2. PC #1

Computer

• USB Type A port

• DisplayPort Port

Operating System

• Windows®7, Windows®8, Windows®8.1, Windows®10

• Mac OS® X 10.7 +

PC2 PC1

1 2

Back

1. Remote Port

2. Console DisplayPort

3. Console USB Keyboard Port

Side

1. CPU 1 / 2 USB Connection

2. CPU 1 / 2 DisplayPort

3. CPU 1 / 2 Audio Port

Port Selection Remote

1. Port Selection Button

21 3 4 5

USB Type-B

123

4. Console USB Mouse Port

5. Console Audio Connection

1. Please make sure your source devices and displays are powered off before

you start.

Note: Make sure you select DisplayPort as the video input on your Display.

3. Connect your USB keyboard and mouse to the console USB keyboard and

mouse port.

2. Connect the DisplayPort cable from your monitor to the console DisplayPort.

DISPLAY

Backspace

1 A

Hardware Installation

Operation

4. If you choose to use the Port Selection Remote, plug it into the Remote Port.

6. Turn on your computers and other devices.

Users have two options to switch between the two connected computers:

Option 1.

Port Selection Remote

Toggle between the two connected computers by connecting the Port Selection

Remote and pressing the remote button.

Option 2.

Hotkey

Use the hotkey function to switch between connected computers, refer to

Hotkey Summary on Page 7.

5. Connect DisplayPort, USB 2.0, and Audio cables from the KVM switch

to each computer.

DisplayPort

USB 2.0

Audio

PC2 PC1

Step 7

If you have checked the “Check Firmware Version” checkbox, then the utility will

check the current firmware that is on your KVM. If the current firmware is newer

than the firmware that you wish to upgrade to, a window will pop up and ask if you

wish to proceed. Simply click “Yes” to start the upgrade or “No” to cancel

the upgrade.

Note: If you did not check the “Check Firmware Version” checkbox, utility will

perform the upgrade automatically independent of what version firmware you have

installed currently.

Step 8

When the firmware upgrade is complete, you will see “Firmware upgrade

OK” in the “Status Messages” window. Simply click “Finish” to complete

the firmware upgrade process.

Final Step

Now the KVM will reset by itself and it will be ready for use after the reset.

Note: The firmware upgrade tool is only for Windows OS.

The Window-based Firmware Upgrade Utility (FWUpgrade.exe) provides a smooth,

automated process for upgrading the GCS62DP firmware.

Note: In order to perform a firmware upgrade, you need to use a computer that’s

not connected to the KVM.

Step 1

Connect a USB cable from any open USB port of the KVM to the USB port on the

computer. Connect the power adapter from your power outlet to the KVM.

Step 2

Go to www.iogear.com to download the latest available firmware or the specific

firmware that you wish to upgrade the KVM to.

Step 3

Shut down all the computers that are connected to the KVM. Start firmware

upgrade by invoking Firmware Upgrade Mode. (Please refer to Hotkey Summary

on page 7.) The top LEDs will flash together to indicate Firmware Upgrade Mode is

in effect.

Step 4

Extract the file with WinRAR or compatible software. Then double-click on the .exe

file to begin with the Firmware Upgrade Utility.

Step 5

The Firmware Upgrade Utility welcome screen appears. Read the License

Agreement and click “I Agree” then click “Next” if you wish to continue with the

firmware upgrade. Otherwise, click “Cancel” to exit.

Step 6

Choose the correct KVM that you wish to perform the firmware upgrade on from the

“Device List” and then click “Next” to continue. The Firmware Upgrade Utility will

then verify if there is a KVM connected to the computer by the firmware upgrade

cable. (Checking the Firmware Version checkbox is optional).

Firmware Update

Step 7

If you have checked the “Check Firmware Version” checkbox, then the utility will

check the current firmware that is on your KVM. If the current firmware is newer

than the firmware that you wish to upgrade to, a window will pop up and ask if you

wish to proceed. Simply click “Yes” to start the upgrade or “No” to cancel

the upgrade.

Note: If you did not check the “Check Firmware Version” checkbox, utility will

perform the upgrade automatically independent of what version firmware you have

installed currently.

Step 8

When the firmware upgrade is complete, you will see “Firmware upgrade

OK” in the “Status Messages” window. Simply click “Finish” to complete

the firmware upgrade process.

Final Step

Now the KVM will reset by itself and it will be ready for use after the reset.

Note: The firmware upgrade tool is only for Windows OS.

The Window-based Firmware Upgrade Utility (FWUpgrade.exe) provides a smooth,

automated process for upgrading the GCS62DP firmware.

Note: In order to perform a firmware upgrade, you need to use a computer that’s

not connected to the KVM.

Step 1

Connect a USB cable from any open USB port of the KVM to the USB port on the

computer. Connect the power adapter from your power outlet to the KVM.

Step 2

Go to www.iogear.com to download the latest available firmware or the specific

firmware that you wish to upgrade the KVM to.

Step 3

Shut down all the computers that are connected to the KVM. Start firmware

upgrade by invoking Firmware Upgrade Mode. (Please refer to Hotkey Summary

on page 7.) The top LEDs will flash together to indicate Firmware Upgrade Mode is

in effect.

Step 4

Extract the file with WinRAR or compatible software. Then double-click on the .exe

file to begin with the Firmware Upgrade Utility.

Step 5

The Firmware Upgrade Utility welcome screen appears. Read the License

Agreement and click “I Agree” then click “Next” if you wish to continue with the

firmware upgrade. Otherwise, click “Cancel” to exit.

Step 6

Choose the correct KVM that you wish to perform the firmware upgrade on from the

“Device List” and then click “Next” to continue. The Firmware Upgrade Utility will

then verify if there is a KVM connected to the computer by the firmware upgrade

cable. (Checking the Firmware Version checkbox is optional).

Hotkey Summary

[Scroll Lock], [Scroll Lock]

[Enter] Switch KVM with audio

1. Change [Scroll Lock], [Scroll Lock] to [Ctrl], [Ctrl]

2. Press again to change back

Function Hotkey Description

Starts Auto Scan. The KVM focus cycles from

port to port at n second intervals.

Note: The n stands for the number of seconds

that the focus dwells on a port before switching

to the other one. Replace the n with a number

between 1 and 4 when entering this hotkey

combination.

[1] change scan interval to 3 seconds

[2] change scan interval to 5 seconds

[3] change scan interval to 10 seconds

[4] change scan interval to 20 seconds

[Space bar] or [Esc], stop scan

[X] / [x], [Enter]

Switch audio only

[S] / [s], [Enter]

[A] / [a], [Enter], [n]*

*Scan Interval

1. Enables / Disables mouse emulation function

Default mouse emulation enabled

[M], [m], [Enter]

1. Enables / Disables mouse port-switching function

2. Default mouse port-switching function disabled

[W], [w], [Enter]

[Scroll Lock], [Scroll Lock] Enable / Disable Power on Detection

[E], [e], [Enter]

[Scroll Lock], [Scroll Lock]

1. Mac keyboard mapping activate

2. To cancel, press [Scroll Lock], [Scroll Lock], [F10],

[Enter]

[F2], [Enter]

[Scroll Lock], [Scroll Lock] Auto detects the keyboard operating platform (for

PC compatible systems)

[F10], [Enter]

[Scroll Lock], [Scroll Lock] List Hotkey Settings

[F4], [Enter]

[Scroll Lock], [Scroll Lock] USB Reset

[F5], [Enter]

[Scroll Lock], [Scroll Lock] Invoke Firmware upgrade mode

[u] [p] [g] [r] [a] [d] [e]

[Enter]

[Scroll Lock], [Scroll Lock] Resets the hotkey settings to their default status

Change keyboard language where “nn” is the two

digit number that represents the desired keyboard

language code – U.S. English: 33 (default);

Japanese: 15; French: 08; German: 09

[Scroll Lock], [Scroll Lock] [F6], [nn], [Enter]

[R] / [r], [Enter]

When mouse switch function activates, switch to

next PC

[wheel], [wheel]

Disclaimers

MST (Multi-Stream Transport) requires either monitors that are capable of

DisplayPort 1.2 daisy-chaining, or use of a powered DisplayPort MST Hub. PC

source must be DisplayPort 1.2 compliant. DisplayPort v1.1a display can be the

last display in a DP v1.2 chain.

DP++ (DP Dual Mode) requires use of a powered DP++ adapter.

Graphics source must be DP++ compliant

HD audio through DisplayPort cannot be switched indepedently.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential setting.

This product generates, uses, and can radiate radio frequency energy and, if not

installed and used as directed, it may cause harmful interference to radio

communications. Although this product complies with the limits for a Class B

digital device, there is no guarantee that interference will not occur in a

particular installation.

CE Compliance

This device has been tested and found to comply with the following European

Union directives: Electromagnetic Capability (2004/108/EC), Low Voltage

(2006/95/EC) and R&TTED (1999/5/EC).

Compliance Information

WE’RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP

THIS PRODUCT?

Make sure you:

1. Visit www.iogear.com for more product information

2. Visit www.iogear.com/support for live help and product support

www.iogear.com

iogear.custhelp.com

support@iogear.com

19641 Da Vinci, Foothill Ranch, CA 92610

Contact

Warranty Information

This product carries a 3 Years Limited Warranty. For the terms and

conditions of this warranty, please go to http://www.iogear.com/support/warranty

Important Product Information

Product Model

Serial Number

Limited Warranty

Tabla de contenidos

Otros manuales de Cambiar de IOGear

IOGear

IOGear MiniView Extreme GCS1732 Manual de usuario

IOGear

IOGear MiniView GCS1772 Manual de usuario

IOGear

IOGear GUS402 Manual de usuario

IOGear

IOGear GCS1716 Manual de usuario

IOGear

IOGear MiniView GCS52U Manual de usuario

IOGear

IOGear MicroHub GUH274 Manual de usuario

IOGear

IOGear MiniView GCS1762 Manual de usuario

IOGear

IOGear GVS881 GVS881 GVS881 Manual de usuario

IOGear

IOGear MiniView Ultra+ GCS1758 Manual de usuario

IOGear

IOGear GUWH104KIT Manual de usuario

IOGear

IOGear GCS1108 Manual de usuario

IOGear

IOGear M1123 Manual de usuario

IOGear

IOGear MiniView SE GCS82B Manual de usuario

IOGear

IOGear GCS1412TAA4C Manual de usuario

IOGear

IOGear GCS1212TAA Manual de usuario

IOGear

IOGear MiniView Micro GCS62 Manual de usuario

IOGear

IOGear UpStream Pro GUV303 Manual de usuario

IOGear

IOGear GCS1102 Manual de usuario

IOGear

IOGear MiniView Micro Audio GCS614A Manual de usuario

IOGear

IOGear GCS1953 Manual de usuario

IOGear

IOGear GUH374 Manual de usuario

IOGear

IOGear GDPSP2 Manual de usuario

IOGear

IOGear GCS62HU Manual de usuario

IOGear

IOGear GCS1602CC Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario