Intermec EasyCoder PD4 Manual de usuario

User’s Guide

EasyCoder PD4

Bar Code Label

Printer

Intermec Technologies Corporation

Corporate Headquarters

6001 36th Ave. W.

Everett, WA 98203

U.S.A.

www.intermec.com

e information contained herein is proprietary and is provided solely

for the purpose of allowing customers to operate and service Intermec-

manufactured equipment and is not to be released, reproduced, or used

for any other purpose without written permission of Intermec.

Information and speciﬁcations contained in this document are subject to

change without prior notice and do not represent a commitment on the

part of Intermec Technologies Corporation.

e word Intermec, the Intermec logo, Norand, ArciTech, CrossBar,

Data Collection Browser, dcBrowser, Duratherm, EasyCoder, EasyLAN,

Enterprise Wireless LAN, EZBuilder, Fingerprint, i-gistics, INCA (under

license), InterDriver, Intermec Printer Network Manager, IRL, JANUS,

LabelShop, Mobile Framework, MobileLAN, Nor*Ware, Pen*Key,

Precision Print, PrintSet, RoutePower, TE 2000, Trakker Antares, UAP,

Universal Access Point, and Virtual Wedge are either trademarks or regis-

tered trademarks of Intermec Technologies Corporation.

roughout this manual, trademarked names may be used. Rather than

put a trademark (™ or ®) symbol in every occurrence of a trademarked

name, we state that we are using the names only in an editorial fashion,

and to the beneﬁt of the trademark owner, with no intention of infringe-

ment.

ere are U.S. and foreign patents pending.

e name Centronics is wholly owned by GENICOM Corporation.

Windows is a trademark of Microsoft Corporation.

Intermec EasyCoder PD4—User’s Guide iii

FCC Notice (United States of America)

WARNING

is equipment generates, uses, and can radiate radio frequency energy

and if not installed and used in accordance with the instructions manual,

may cause interference to radio communications. It has been tested and

found to comply with the limits for a Class A computing device pursu-

ant to Subpart J of Part 15 of FCC Rules, which are designed to provide

reasonable protection against such interference when operated in a com-

mercial environment. Operation of this equipment in a residential area

is likely to cause interference in which case the user at his own expense

will be required to take whatever measures may be required to correct the

interference.

EMS and EMI Compliance Statement

is equipment has been tested and passed with the requirements relat-

ing to electromagnetic compatibility based on the standards EN50081-1

(EN55022 CLASS A) and EN61000-4-2/-3/-4/-5/-6/-8/-11 (IEC Teil

2,3,4). e equipment also tested and passed in accordance with the

European Standard EN55022 for the both Radiated and Conducted

emissions limits.

iv Intermec EasyCoder PD4—User’s Guide

Intermec EasyCoder PD4—User’s Guide v

Contents

Before You Begin ......................................................................... viii

Safety Summary ............................................................ viii

Safety Icons .................................................................... ix

Global Services and Support .......................................................... x

Warranty Information ...................................................... x

Web Support ................................................................... x

Telephone Support .......................................................... x

Related Documents ......................................................... x

1 Introduction

Description of EasyCoder PD4 ......................................................2

Safety Warnings .............................................................................3

Product Identiﬁcation ....................................................................3

2 Installation

Unpacking the Printer ....................................................................6

Front View .....................................................................................7

Rear View ......................................................................................8

Media Compartment .....................................................................9

Print Mechanism ..........................................................................10

Connections .................................................................................11

Power ............................................................................11

Computer ......................................................................11

Controls and Indicators ...............................................................12

Control Lamps ..............................................................12

Display ..........................................................................12

Control Keys .................................................................12

Beeper ...........................................................................12

3 Starting Up

Switching On the Printer .............................................................16

Direct Mode ................................................................................17

Printing a Test Label .....................................................................18

vi Intermec EasyCoder PD4—User’s Guide

Contents

4 Loading Media

Tear-Oﬀ (Straight-through) .........................................................20

Peel-Oﬀ (Self-strip) .....................................................................25

ermal Transfer Printing ............................................................29

Ribbon Load ................................................................................30

5 Printing

Controlling the Printing ...............................................................34

Setup Methods .............................................................................35

Navigating in the Setup Mode .....................................................35

6 Options

Stripper and Internal Rewinder ....................................................40

Installation Instructions .................................................40

Cutter ..........................................................................................42

Installation Instructions .................................................42

7 Troubleshooting

Error Handling ............................................................................46

Clearing Media Jam in Cutter ......................................................49

Entering the Dump Mode ............................................................50

8 Maintaining the Printer

Printhead Cleaning ......................................................................52

External Cleaning ........................................................................54

Media Jams ..................................................................................56

9 Adjustments

Printhead Balance Adjustment .....................................................58

Printhead Pressure Adjustment .....................................................59

Printhead Dot Line Position Adjustment .....................................60

Label Gap Sensor Position Adjustment ........................................62

Label Gap Sensor Calibration ......................................................63

Ribbon Tension Adjustment .........................................................64

Ribbon Shield Adjustment ...........................................................65

Switching Edge Guide ..................................................................66

Intermec EasyCoder PD4—User’s Guide vii

Contents

A Technical Data

Table of Technical Data ................................................................70

B Media Speciﬁcations

Media Roll Size ............................................................................74

Core ..............................................................................74

Internal Roll ..................................................................74

Media ..........................................................................................75

Non-Adhesive Strip .......................................................75

Self-Adhesive Strip .........................................................76

Self-Adhesive Labels .......................................................77

Tickets with Gaps ..........................................................79

Tickets with Black Mark ................................................81

C Interfaces

RS-232 Interface ..........................................................................84

Protocol .........................................................................84

Interface Cable ..............................................................84

USB Interface ..............................................................................85

Parallel Interface ...........................................................................86

D Firmware Upgrading

Requirements ...............................................................................88

Instructions ..................................................................................88

viii Intermec EasyCoder PD4—User’s Guide

Before You Begin

is section provides you with safety information, technical support

information, and sources for additional product information.

Safety Summary

Your safety is extremely important. Read and follow all warnings and

cautions in this document before handling and operating Intermec

equipment. You can be seriously injured, and equipment and data can be

damaged if you do not follow the safety warnings and cautions.

Do not repair or adjust alone

Do not repair or adjust energized equipment alone under any circum-

stances. Someone capable of providing ﬁrst aid must always be present

for your safety.

First aid

Always obtain ﬁrst aid or medical attention immediately after an injury.

Never neglect an injury, no matter how slight it seems.

Resuscitation

Begin resuscitation immediately if someone is injured and stops breath-

ing. Any delay could result in death. To work on or near high voltage,

you should be familiar with approved industrial ﬁrst aid methods.

Energized equipment

Never work on energized equipment unless authorized by a responsible

authority. Energized electrical equipment is dangerous. Electrical shock

from energized equipment can cause death. If you must perform autho-

rized emergency work on energized equipment, be sure that you comply

strictly with approved safety regulations.

Intermec EasyCoder PD4—User’s Guide ix

Before You Begin

Safety Icons

is section explains how to identify and understand dangers, warnings,

cautions, and notes that are in this document. You may also see icons

that tell you when to follow ESD procedures.

A warning alerts you of an operating procedure, practice,

condition, or statement that must be strictly observed to

avoid death or serious injury to the persons working on the

equipment.

A caution alerts you to an operating procedure, practice,

condition, or statement that must be strictly observed to

prevent equipment damage or destruction, or corruption or

loss of data.

is icon appears at the beginning of any procedure in this

manual that could cause you to touch components (such as

printed circuit boards) that are susceptible to damage from

electrostatic discharge (ESD). When you see this icon, you

must follow standard ESD guidelines to avoid damaging the

equipment you are servicing.

Note: Notes either provide extra information about a topic or

contain special instructions for handling a particular condition

or set of circumstances.

x Intermec EasyCoder PD4—User’s Guide

Before You Begin

Global Services and Support

Warranty Information

To understand the warranty for your Intermec product, visit the

Intermec web site at http://www.intermec.com and click Service &

Support. e Intermec Global Sales & Service page appears. From the

Service & Support menu, move your pointer over Support, and then

click Warranty.

Web Support

Visit the Intermec web site at http://www.intermec.com to download

our current documents in PDF format. To order printed versions of the

Intermec manuals, contact your local Intermec representative or distribu-

tor.

Visit the Intermec technical knowledge base (Knowledge Central) at

http://intermec.custhelp.com to review technical information or to

request technical support for your Intermec product.

Telephone Support

Contact your local Intermec representative. To search for your local rep-

resentative, from the Intermec web site, click Contact.

Manuales populares de Etiquetadora de otras marcas

Brother

Brother P-Touch 2420PC Manual de usuario

newell

newell Dymo LabelManager 210D Manual de usuario

Brother

Brother TD-4000 Manual de usuario

U-Line

U-Line BROTHER H-8754 Manual de usuario

Tharo Systems

Tharo Systems H-435+ Manual de usuario

Brother

Brother E300 Manual de usuario

Godex

Godex RT700 SERIES Manual de usuario

ID Technology

ID Technology 252 Manual de usuario

Labelmate

Labelmate MC-11 Manual de usuario

CAB

CAB XD4M/300 Manual de usuario

Avery Dennison

Avery Dennison Pathfinder 6057 Manual de servicio

Brother

Brother P-touch PT-9700PC Manual de usuario

TSC

TSC PEX1000 Series Manual de usuario

Adkins

Adkins Label Master Manual de usuario

Epson

Epson LabelWorks LW-400 Manual de usuario

Primera

Primera 510212 Manual de usuario

Brady

Brady BradyPrinter S3100 Manual de usuario

DuraLabel

DuraLabel LabPRO Manual de usuario