Interlogix NS3550-8T-2S Manual de usuario

property of their respective owners. Information in this document is subject to change without notice.

NS3550-8T-2S Quick Installation Guide

Figure 1: NS3550-8T-2S Industrial L2+ Multi-Port Managed

Ethernet Switch

Package contents

Thank you for purchasing the NS3550-8T-2S IFS L2+ industrial

managed switch. The description of this model is as follows:

Industrial L2+ 8-Port 10/100/1000T

+ 2-Port 100/1000X SFP Managed Switch

Unless specified, the term “industrial managed switch”

mentioned in this quick installation guide refers to the NS3550-

8T-2S.

Open the box of the industrial managed switch and carefully

unpack it. The box should contain the following items:

The industrial managed switch × 1

Quick installation guide × 1

CD with user manual × 1

DIN rail kit × 1

Wall mounting kit × 1

Dust cap (see the table below)

RJ45 Dust Cap

SFP Dust Cap

NS3550-8T-2S 8 2

If any of these are missing or damaged, contact your dealer

immediately. If possible, retain the carton including the original

packing materials for repacking the product in case there is a

need to return it to us for repair.

Requirements

The industrial managed switch provides a remote login

interface for management purposes. The following equipment

is necessary for further management:

Workstations running Windows®XP / 2003 / Vista / 7 / 8 /

2008 / 10, MAC OS X or later, Linux, UNIX, or other

platforms are compatible with TCP/IP protocols.

Workstations are installed with Ethernet NIC (Network

Interface Card).

Serial port connection (Terminal)

The above workstations come with a COM Port (DB9)

or USB-to-RS-232 converter.

Ethernet port connection

Network cables – Use standard network (UTP) cables

with RJ45 connectors.

The above workstations have a web browser and

JAVA runtime environment plug-in installed.

Note: We recommend using Internet Explorer 8.0 or later to

access the industrial managed switch. If the web interface of

the managed switch is not accessible, turn off the anti-virus

software or firewall and then try it again.

Wiring the power inputs

The upper panel of the industrial managed switch indicates a

DC inlet power socket and consists of one terminal block

connector within six contacts. Follow the steps below to insert

the power wire:

1. Insert the positive/negative DC power wires into contacts 1

and 2 for Power 1, or 5, and 6 for Power 2.

NS3550-8T-2S: DC 12 to 48 V

Figure 2: Managed industrial switch upper panel

2 / 4 P/N 1072772-EN • REV C • ISS 01FEB19

2. Tighten the wire-clamp screws to prevent the wires from

loosening.

V-

V+

V-

V+

Power 1

Power 2

Positive (+) Pin Negative (-) Pin

NS3550-8T-2S Pin 2/6 Pin 1/5

Note: The wire gauge for the terminal block should be in the

range from 12 to 24 AWG.

Mounting

Note: Ensure that the industrial managed switch is mounted

vertically with the power connectors on the top and a minimum

of three inches above and below the switch to allow for proper

air flow. This device uses a convection flow of hot air which

rises and brings cold air in from the bottom and out of the top

of the device. Do not mount the switch horizontally as this does

not allow air to flow up into the device and will result in damage

to the switch. Do not tie DC1 to DC2. DC2 is for secondary

power redundancy. Do not plug DC power into the device while

the AC power cord is plugged in. This is not a hot-swappable

switch. Hot-swapping this device will result in damage.

DIN-rail mounting installation

To replace the wall-mount application with DIN-rail application

on industrial gigabit Ethernet switch, refer to the following

figures to screw the DIN-rail on the industrial gigabit Ethernet

switch.

To hang the industrial gigabit Ethernet switch, follow the steps

below:

1. Screw the DIN-rail on the industrial gigabit Ethernet

switch.

2. Place the bottom of DIN-rail lightly into the track.

3. Ensure that the DIN-rail is secured to the track.

To remove the industrial gigabit Ethernet switch from the track,

carefully pull out the bottom of the DIN-rail to remove it from

the track.

Wall-mount plate mounting

To install the industrial gigabit Ethernet switch on the wall,

follow the steps below.

1. Remove the DIN-rail from the industrial gigabit Ethernet

switch. Loosen the screws to remove the DIN-rail.

2. Place the wall-mount plate on the rear panel of the

industrial gigabit Ethernet switch.

P/N 1072772-EN • REV C • ISS 01FEB19 3 / 4

3. Use the screws to screw the wall-mount plate on the

industrial gigabit Ethernet switch.

4. Use the hook holes at the corners of the wall-mount plate

to hang the industrial gigabit Ethernet switch on the wall.

5. To remove the wall-mount plate, reverse the steps above.

Starting web management

The section describes how to start up the web management

function for the industrial managed switch. Note that the

industrial managed switch is configured through an Ethernet

connection. Ensure that the manager computer is set to the

same IP subnet address.

For example, if the default IP address of the industrial

managed switch is 192.168.0.100, then the manager computer

should be set to 192.168.0.x (where x is a number between 1

and 254, except 100), and the default subnet mask is

255.255.255.0.

Figure 3: IP management diagram

Logging in to the industrial managed switch

1. Use the Internet Explorer 8.0 or later web browser and

type the IP address http://192.168.0.100 (the factory-

default IP address) to access the web interface.

2. When the following dialog box appears, enter the default

user name “admin” and password “admin” (or the

password you have changed before) as shown in Figure 4

below.

Default IPAddress: 192.168.0.100

Default User Name: admin

Default Password: admin

Figure 4: Login screen

3. After typing the password, the main screen appears as

shown in Figure 5 below.

Figure 5: Main web interface screen

4. The switch menu on the left side of the web page permits

access to all the functions and status provided by the

industrial managed switch.

Refer to the User Manual for further information about using

the web management interface.

Note: For security purposes, change and memorize the new

password after this first setup.

4 / 4 P/N 1072772-EN • REV C • ISS 01FEB19

Saving the configuration

The running configuration file is stored in the RAM of the

industrial managed switch. In the current version, the running

configuration sequence of running-config can be saved from

the RAM to FLASH by executing the Save Configuration

command. After doing this, the running configuration sequence

becomes the startup configuration file (i.e., the saved

configuration).

To save all applied changes and set the current configuration

as a startup configuration, the startup-configuration file is

loaded automatically across a system reboot.

1. Click System > Configuration Backup.

2. Click the Save Configuration button.

Resetting the switch to default

To reset the IP address to the default IP address

“192.168.0.100” and the user password to factory default mode

(default password is “admin”), press the hardware reset button

on the front panel for about 10 seconds. After the device is

rebooted, log in to the management web interface within the

same subnet of 192.168.0.xx and default password. Note that

all the previous setups are erased after the factory default

reset.

Figure 6: Reset button

Contact information

North America

+1 855.286.8889

techsupport@interlogix.com

www.interlogix.com/support

Latin America

+1 561-998-6114

latam@interlogix.com

Europe, Middle East, and Africa

Select Contact Us at www.firesecurityproducts.com

Australia

security.t[email protected].au

www.utcfs.com.au/support

Otros manuales para NS3550-8T-2S

Tabla de contenidos

Otros manuales de Cambiar de Interlogix

Interlogix

Interlogix IFS NS2052-4P-1T Manual de usuario

Interlogix

Interlogix NS4750-24S-4T-4X Manual de usuario

Interlogix

Interlogix MC251-4P/1S Manual de usuario

Interlogix

Interlogix ES2402 Series Manual de usuario

Interlogix

Interlogix NS3702-24P-4S Manual de usuario

Interlogix

Interlogix NS3702-24P-4S Manual de usuario

Interlogix

Interlogix IFS NS3550-24T/4S Manual de usuario

Interlogix

Interlogix NS3050-8T Manual de usuario

Interlogix

Interlogix IFS NS3050-8T Manual de usuario

Interlogix

Interlogix NS3500-24T-4C Manual de usuario

Interlogix

Interlogix IFS MC350-4T-2S Manual de usuario

Interlogix

Interlogix NS3550-8T-2S Manual de usuario

Interlogix

Interlogix NS4702-24P-4X Manual de usuario

Interlogix

Interlogix POC2502 Series Manual de usuario

Interlogix

Interlogix NS4702-24P-4S-4X Manual de usuario

Interlogix

Interlogix NS4702-24P-4S-4X Manual de usuario

Interlogix

Interlogix IFS GE-DSH-73 Instrucciones de montaje

Interlogix

Interlogix NS3552-16P-2T-2S Manual de usuario

Interlogix

Interlogix NS3552-8P-2S Manual de usuario

Interlogix

Interlogix NS3500-24T-4C Manual de usuario

Interlogix

Interlogix NS3552-8P-2S Manual de usuario

Interlogix

Interlogix IFS ANT-UNI-21DB-2G Manual de usuario

Interlogix

Interlogix NS3553-4P-1T-2S-V2 Manual de usuario

Interlogix

Interlogix NS3500-28T-4S Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario