Interlogix NS3503-16P-4C Manual de usuario

P/N 1073220A • REV A • ISS 21SEP16 1

NS3503-16P-4C L2/L4 Managed Giga

Ethernet Switch Quick Installation Guide

1. Introduction

Thank you for purchasing IFS L2/L4 Managed Gigabit

Ethernet Switch. The description of this model is shown

below:

NS3503-16P-4C 16-port 10/100/1000T Ultra PoE + 4-port Gigabit

TP/SFP Combo Managed Switch

“Managed Switch” is used as an alternative name in

this Quick Installation Guide.

Open the box of the Managed Switch and carefully

unpack it. The box should contain the items listed below:

2. Package Contents

Model Series NS3503-16P-4C

Model Name

Package Item

NS3503-16P

The Managed Switch 1

Quick Installation Guide 1

RS-232 to RJ45 Console Cable 1

Rubber Feet 4

Two Rack-mounting Brackets with

Attachment Screws 2

Power Cord 1

SFP Dust Caps 4

If any item is found missing or damaged, please contact

your local reseller for replacement.

3. Requirements

Workstations running Windows

XP/2003/Vista/7/8/2008/10, MAC OS X or later,

Linux, UNIX,or other platforms are compatible with

TCP/IP protocols.

Workstations are installed with Ethernet NIC

(Network Interface Card)

Serial Port Connection (Terminal)

The above Workstations come with COM Port

(DB9) or USB-to-RS-232 converter.

The above Workstationshave been installed

with terminal emulator, such as Hyper Terminal

included in Windows XP/2003.

Serial cable -- One end is attached to the RS-

232 serial port, while the other end to the

console port of the Managed Switch.

Ethernet Port Connection

Network cables -- Use standard network (UTP)

cables with RJ45 connectors.

The above PC is installed with Web browser and

JAVA runtime environment plug-in.

Note: It is recommended to use Internet Explore 8.0 or

above to access the Managed Switch. If the Web

interface of the Managed Switch is not accessible,

please turn off the anti-virus software or firewall and then

try it again.

4. Terminal Setup

The Managed Switch is equipped with a console

interface for local switch setup and maintenance. To

configure the system, connect a serial cable to a COM

port on a PC or notebook computer and to the RJ45

type of the console port of the Managed Switch.

2 NS3503-16P-4C L2/L4 Managed Giga Ethernet Switch Quick Installation Guide

Figure 4-1 Managed Switch Console Connectivity

A terminal program is required to make the software

connection to the Managed Switch.

1. Run terminal program on the OS.

2. When the following screen appears, make sure that the

COM port should be configured as:

♦

Baud: 115200

♦

Data bits: 8

♦

Parity: None

♦

Stop bits: 1

♦

Flow control: None

Figure 4-2 COM Port Configuration

5. Logon to the Console

Once the terminal is connected to the device, power on

the Managed Switch and the terminal will display

“running testing procedures”. Then, the following

message asks to log-in user name and password. The

factory default user name and password are shown as

follows, and the login screen in Figure 4-1 appears.

Username: admin

Password: admin

Figure 5-1: Managed Switch Console Login Screen

The user can now enter commands to manage the

Managed Switch. For a detailed description of the

commands, please refer to the following chapters.

Note:

1. For security reason, please change and memorize

the new password after this first setup.

2. Only accept command in lowercase letter under

console interface.

6. Configuring IP Address via the

Console

The Managed Switch is shipped with default IP address

as follows:

IP Address: 192.168.0.100

Subnet Mask: 255.255.255.0

To check the current IP address or modify a new IP

address for the Switch, please use the procedures as

follows:

Show the current IP address

1. At the ”NS3503-16P #” prompt, enter “show ip”.

2. The screen displays the current IP Address, Subnet

Mask and Gateway as shown in Figure 5-1.

Figure 6-1: IP Information Screen

Configuring IP address thru commands

3. At the ”NS3503-16P#” prompt, enter “configure”.

4. At the “NS3503-16P(config)#” prompt, enter the

following command and press <Enter> as shown in

Figure 5-2.

NS3503-16P(config)# ip address 192.168.1.100 mask

255.255.255.0

NS3503-16P(config)# ip default-gateway 192.168.1.254

The previous command would apply the following

settings for the Switch.

NS3503-16P-4C L2/L4 Managed Giga Ethernet Switch Quick Installation Guide 3

Figure 6-2: IP Address Screen

IP Address: 192.168.1.100

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.254

3. Repeat Step 1 to check if the IP address has

changed.

If the IP is successfully configured, the Managed

Switch will apply the new IP address setting

immediately. You can access the Web interface of

the NS3503-16P Managed Switch through the new

IP address.

Note: If you are not familiar with console command or

the related parameter, enter “?” anytime in console to

get the help description.

7. Saving the Configuration via the Console

In the switch, the running configuration file is stored in

the RAM. In the current version, the running

configuration sequence of running-config can be saved

from the RAM to FLASH by writing the command or

copying the running-config startup-config command,

so that the running configuration sequence becomes the

startup configuration file, which is the configuration

saved.

1. At the “NS3503-16P#” prompt, enter “copy running-

config startup-config” as shown in Figure 6-1.

Figure 7-1: The Configuration Screen

8. Starting Web Management

The following shows how to start up the Web

Management of the Managed Switch. Note the

Managed Switch is configured through an Ethernet

connection. Please make sure the manager PC must be

set to the same IP subnet address.

For example, the default IP address of the Managed

Switch is 192.168.0.100, then the manager PC should

be set to 192.168.0.x (where x is a number between 1

and 254, except 100), and the default subnet mask is

255.255.255.0.

Figure 8-1: IP Management Diagram

9. Logging in to the Managed Switch

1. Use Internet Explorer 8.0 or above Web browser

and enter IP address http://192.168.0.100 to access

the Web interface.

2. When the following dialog box appears, please enter

the default user name and password “admin”. The

Default Username: admin

Default Password: admin

Figure 8-2: Login Screen

3. After entering the password, the main screen

appears as Figure 7-3 shows.

Figure 8-3: Web Main Screen of Managed Switch

The Switch Menu on the left of the Web page lets

you access all the commands and statistics the

Managed Switch provides.

4 NS3503-16P-4C L2/L4 Managed Giga Ethernet Switch Quick Installation Guide

Figure 8-4: Switch Menu

Now, you can use the Web management interface to

continue the Switch management.

Please refer to the User’sManual for further

information.

10. Saving Configuration via the Web

In the Managed Switch, the running configuration file is

stored in the RAM. In the current version, the running

configuration sequence of running-config can be saved

from the RAM to FLASH by”Save Configurations to

FLASH” function, so that the running configuration

sequence becomes the startup configuration file, which

is the configuration saved.

To save all applied changes and set the current

configuration as a startup configuration,the startup-

configuration file will be loaded automatically across a

system reboot.

1. Click ”Save > Save Configurations to FLASH” to

2. Press the “Apply” button to save running

configuration to start up configuration.

11. Recovering Back to Default

Configuration

IP address has been changed or admin password

has been forgotten –

To reset the IP address to the default IP address

“192.168.0.100” or reset the login password to the

default value,press the hardware reset button on the

front panel for about 10 seconds. After the device is

rebooted,you can login the management Web interface

within the same subnet of 192.168.0.xx.

Figure 10-1: NS3503-16P-4C Reset Button

12. Customer Support

Thank you for purchasing IFS products. You can browse

our online FAQ resource and User’s Manual on IFS Web

site first to check if it could solve yourissue. If you need

more support information, please contact IFS switch

support team.

IFS online FAQ:

http:www.Interlogix.com/support

Switch support team mail address:

http:www.Interlogix.com/support

Otros manuales para NS3503-16P-4C

Tabla de contenidos

Otros manuales de Cambiar de Interlogix

Interlogix

Interlogix NS4702-24P-4X Manual de usuario

Interlogix

Interlogix NS4750-24S-4T-4X-V2 Instrucciones de instalación

Interlogix

Interlogix NS3552-8P-2S Manual de usuario

Interlogix

Interlogix IFS NS3550-24T/4S Manual de usuario

Interlogix

Interlogix IFS ANT-PNL-9DB-2G Manual de usuario

Interlogix

Interlogix NS3553-4P-1T-2S Manual de usuario

Interlogix

Interlogix NS3552-16P-2T-2S Manual de usuario

Interlogix

Interlogix NS3552-8P-2S-V2 Manual de usuario

Interlogix

Interlogix NS3503-16P-4C Manual de usuario

Interlogix

Interlogix IFS MC350-4T-2S Manual de usuario

Interlogix

Interlogix NS3550-8T-2S Manual de usuario

Interlogix

Interlogix ES3002-4P-4T Manual de usuario

Interlogix

Interlogix NS3552-8P-2S Manual de usuario

Interlogix

Interlogix IFS ANT-OMN-15DB-2G Manual de usuario

Interlogix

Interlogix IFS NS2052-4P-1T Manual de usuario

Interlogix

Interlogix IFS NS2503-8P/2C Manual de usuario

Interlogix

Interlogix IFS ANT-PNL-18DB-2G Manual de usuario

Interlogix

Interlogix IADS-PROG Manual de usuario

Interlogix

Interlogix MC251-4P/1S Manual de usuario

Interlogix

Interlogix NS3500-24T-4C Manual de usuario

Interlogix

Interlogix NS3050-8T Manual de usuario

Interlogix

Interlogix IFS NS3502-8P-2S Manual de usuario

Interlogix

Interlogix NS3552-8P-2S-V2 Manual de usuario

Interlogix

Interlogix IFS ANT-UNI-21DB-2G Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario