Instone INVENTOR PRO Manual de usuario
FDM 3D Printer
INVENTOR PRO
Yiwu Instone 3D Technology Co.,Ltd
USER’S MANUAL
Content
Declaration............................................................................................................ - 3 -
Legal Statement.....................................................................................................- 3 -
Important Security Information............................................................................ - 3 -
Brief Introduction.................................................................................................. - 5 -
Overview................................................................................................................- 5 -
Get to know your INVENTOR PRO.........................................................................- 6 -
Product List............................................................................................................- 6 -
Open-package........................................................................................................- 7 -
Brief Introduction of User Interface......................................................................- 8 -
Machine Installation and Operation Guide.........................................................- 11 -
Software Installation and Operation Guide........................................................ - 13 -
1. Install the Instone 3D................................................................................- 13 -
2. Basic settings............................................................................................ - 14 -
3. Advanced parameters instruction............................................................ - 15 -
4. Expert Settings..........................................................................................- 16 -
5. Load model file......................................................................................... - 17 -
6. Rotate........................................................................................................- 17 -
7. Scale.......................................................................................................... - 18 -
8. Mirror........................................................................................................- 18 -
9. Right-mouse menu................................................................................... - 18 -
Online printing and firmware updates................................................................- 19 -
Precautions and FAQ........................................................................................... - 20 -
WIFI Module Operating Guide............................................................................ - 22 -
- 3 -
Declaration
All INVENTOR PRO 3D Printer will be tested and calibrated before delivery. With
more than 8-hour continuous printing test, the following phenomena are normal:
particle dust on the shell or the slight traces on the nozzle, etc.. Please read this
manual carefully before using the printer to avoid damaging both the body and
machine.
Legal Statement
We have all the rights to modify the relevant contents of this manual without
notice.
The machine case is flammable and there are heating components inside the
machine. So don’t leave the device unattended after power-on. If any abnormality is
found, please cut off the power supply in time to prevent the fire. Any accidents
caused by misoperation would not be assumed by us.
We are not responsible for any loss without following this manual (including
subsequent loss, misprints and publishing errors). No part of this manual can be
modified, photocopied, or translated without prior written authorization. This manual
is copyrighted and we reserves all the rights of the final explanation.
Important Security Information
Failure to follow the instructions in this manual may result in fire, equipment damage,
property loss or personal injury.
Before using the product, please refer to the Quick Start Guide and User's Manual.
Operation:
1.For INVENTOR PRO and power adapter, please keep the surrounding
temperature range 15~40℃, humidity range 20%~50%. Otherwise it may affect the
quality of the print model and even cause a security risk.
2.INVENTOR PRO 3D Printer can only use the company's standard power
adapter cable. The use of damaged cables, or power in damp environments may
damage the equipment or cause fire.
3.During the printing process, a slight odor is produced. The odor is non-toxic
but might cause slight discomfort to the human body. Therefore, it is recommended to
use in the well-ventilated environment.
4.Try to keep the printer away from strong airflow which might have a certain
impact on print quality.
5.Do not expose the printer to water or other liquids which might cause damage
- 4 -
to the machine.
6.If INVENTOR PRO is dropped, burnt, punctured or crushed, it might be
damaged. Do not use the damaged INVENTOR PRO to keep away from personal
injury and property damage.
Maintenance: If INVENTOR PRO is damaged or malfunctioning, please contact our
company or authorized service provider. Do not open the INVENTOR PRO and try to
repair by yourself. Disassemble INVENTOR PRO might cause equipment damage or
personal injury.
Squeeze-Involve-cutting: The INVENTOR PRO has mounts of motion components.
Avoid contact with these moving parts during operation. To prevent the body is
squeezed, involved, cutting and other injuries.
Caution hot scald:
1.During working, the nozzle, floor and other components of machine will
produce high temperature. Please avoid direct skin contact with these parts.
2.Do not touch the high-temperature parts of the model, nozzles, printing
platforms, etc. when models just finish printing. Wait for these components to cool
sufficiently before removing the model and other subsequent operation.
- 5 -
YIWU INSTONE 3D TECHNOLOGY CO.,LTD
Website: www.instone3d.com
Contact: Cathy/ Wilona
Support Email: sales01@instone3d.com
Tel: +86-579-89026661
Skype: live:instone01_1
Twitter: Instone_3D
Facebook: Instone 3D
Addr.: Flr.3, Bld.2, Area B, No.E-21 Xinke Road, Yiwu Economic & Development
Zone, Yiwu, Zhejiang, China
Brief Introduction
1. How to use the manual?
This manual is divided into four sections, including overview, installation,
operation, and common troubleshooting. Please read this manual carefully before use,
and operate according to the manual. If necessary, please print it for reference.
2. How to protect the machine?
Do not turn the power off or unplug the SD card while the model is being loaded.
Otherwise, the model data will be lost.
During the printer debugging, the nozzle will squeeze out the material. Make sure
that the distance between the nozzle and the print platform is at least 50 mm, or the
nozzle might be blocked.
Overview
INVENTOR PRO series, with the ownership of several patents ,is the new generation
of 3D printer with independent design, development and manufacturer .After simple
training ,you are able to create whatever model you like even you have never used it
before. The principle of the printer is to melt and extrude the materials at high
temperature and then solidifies after rapid modeling to make it strong and durable .We
continuously improve our systems with implementing of functions such as half-way
reloading ,WIFI, touch screen etc. It will be more convenient to take the model by
adopting the modular design .Users will benefit from better vision ,free from long
bending operation and thus brings more choice and pleasant operating experience
with the touch screen on top of the machine.
- 6 -
Get to know your INVENTOR PRO
- 7 -
Basic parameters:
Product name: FDM 3D Printer Brand: Instone
Model: INVENTOR PRO Input voltage: 110V/220V AC 50/60Hz
Maximum power: 230W Forming principle: FDM
Nozzle temperature: 245℃(Max) Working condition: 10-40℃, Humidity 20-50%
Moulding size: 240x160x160mm Printing speed:40-150mm/s
Positioning accuracy: Axis Z: 0.0025mm, X/Y: 0.011mm
Printing accuracy: ±0.1mm Layer thickness: 0.1-0.3mm
Nozzle diameter: 0.4mm Nozzle number: Single
Changing material midway: Support WIFI: Support
User interface: 3.5 inch touchscreen
Software requirement:
Enclosed software: Inston3D, Cura
Extended software: Slic3r, Repetier-host，Simplify3D
File formats: STL，OBJ，G-Code OS: Windows，Linux，Mac
Consumables specifications:
Printing material: ABS，PLA Diameter: 1.75mm
Color: Colorful
Machine specification:
Size: 441x344x407mm Package size: 525x440x525mm
Machine material: Injection molding/Plastic shell
Product weight: 12KG Gross weight: 18KG
Open-package
- 8 -
Brief Introduction of User Interface
Logical Relationship
HOMEPAGE
SYSTEM
- 9 -
TOOL
FILE CHOOSE
FILE OPERATION
PRINTING INTERFACE
PRINTING TOOL
NUM KEYBOARD
MANUAL
PREHEAT
- 10 -
FILAMENT
LEVEL
FAN
WORKING CONDITION
INFO
WIFI
Tabla de contenidos
Otros manuales de Impresora 3D de Instone
