Ingenico Move 2500 Manual de usuario
This manual contains detailed information
about the operation of the POS devices
Ingenico Move 2500 Ingenico Desk 3200
Content
Description of the functions of the keypad buttons 2
Purchase 3
Reversal 6
Preauthorization 8
Sale Completion 10
Manual Purchase 12
Manual Reversal 14
Handshake 17
Device Reports 18
Loading a paper roll 19
Frequently asked questions 22
Keypad button functions
Device ON/OFF
1. Navigation buttons
2. Main menu
3. Cancel button (red)
4. Delete/Paper load button (yellow)
5. Enter button (green)
6. Decimal point button
3
2
1
4
5
1
3 4 5
2
6
Move 2500
ON: long press of the green button
OFF: long press of the yellow and decimal point buttons simultane-
ously
Desk 3200
ON: plug the device into an AC power socket
OFF: long press of the red button
2
General device operations
PURCHASE
The PURCHASE operation can be initiated in two ways:
• By entering the purchase amount directly using the device keypad
when the device display is in ready state.
• By pressing the “Main Menu” button, selecting the “FINANCIAL
OPER.” menu and the “PURCHASE” submenu.
The device display then shows the following purchase amount entry
screen:
Enter the amount and conrm using the green button. The display
shows the following message and the device prompts the user to
read the card.
3
The card details can be read as follows:
Magnetic strip – slide the card through the slot on the right;
IC – insert the card into the slot in the front;
Contactless – place the card near the contactless mark at the top
. Contactless card transactions can be processed only
if the card has the contactless payment symbol on its face.
4
Depending on the transaction, the device may prompt the user to
enter a PIN (Personal Identication Number). The display will show
the appropriate message in this case. Enter the PIN and conrm
using the green button.
The device now has all the required information for the respective
transaction and card type. It will connect to the service bank and
proceed with the transaction processing. The display will show the
communication status. If the PURCHASE is approved, the device will
print a receipt with the respective transaction details.
Sample approved transaction receipt:
Caution!
If the device prints a POS receipt requiring a CARD HOLDER SIGNATURE, the
signature must be placed and veried with the holder’s signature on the
back of the card.
All messages displayed on the device must also be followed, because, in
some cases, it may be possible to verify the signature using the device itself.
Otherwise, the device may decline to process the respective transaction.
Caution!
The transaction is approved only when the respective receipt is printed. If no receipt
is printed, even when the device is out of paper, or the printed receipt shows a
declined transaction message, the transaction is considered declined.
5
If the transaction is not approved by the card issuer, the operation
will be terminated with the appropriate message.
From the main menu, select the “FINANCIAL OPER.” menu and the
“Reversal” submenu.
The device displays the following message prompting the user to
enter a password.
The password for this operation type is 1111. Enter the password
and press the green button to conrm. The device displays the
following message prompting the user to read the card.
REVERSAL
6
The card must be read using one of the methods described above:
- Magnetic strip
- IC
- Contactless
When the card is successfully read, the device prompts the user to
enter the receipt number to reverse:
Sample receipt with the required number:
The device displays the reversal amount and asks for a conrmation
using the green button.
7
Upon successful transaction reversal, the device will always print a
receipt with information on the reversed transaction.
Sample transaction reversal receipt:
A PREAUTHORIZATION is an operation where the merchant reserves
(locks) an amount on the card for an upcoming transaction to be
completed within a predened time set by the bank. Ifthe transaction
is completed successfully, the device issues an authorization code
to be used later for the SALE COMPLETION operation.
This service is available upon additional merchant approval by the
bank.
PREAUTHORIZATION
8
Process steps:
From the “FINANCIAL OPER.” menu, select “PREAUTHORIZATION”.
The display shows an amount entry eld.
Aer the amount is entered, the device prompts the user to read
the card. Depending on the card reading mode and the amount, the
device may require an additional PIN entry.
If the transaction is processed successfully, the device prints the
following receipt:
9
Otros manuales para Move 2500
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Terminal táctil de Ingenico
Ingenico
Ingenico AXIUM RX5000 Manual de usuario
Ingenico
Ingenico Link 2500 Manual de usuario
Ingenico
Ingenico DESK/3500 Manual de usuario
Ingenico
Ingenico DESK/3500 Manual de usuario
Ingenico
Ingenico IWL220 GPRS Manual de usuario
Ingenico
Ingenico Desk 3500 Manual de usuario
Ingenico
Ingenico iCT Series Manual de usuario
Ingenico
Ingenico iWL252 Manual de usuario
Ingenico
Ingenico Lane/7000 Manual de usuario
Ingenico
Ingenico IWL 250 Manual de usuario
Ingenico
Ingenico AXIUM D7 Manual de usuario
Ingenico
Ingenico APOS A8 Manual de usuario
Ingenico
Ingenico iWL250 WIFI Manual de usuario
Ingenico
Ingenico WebPOS iWP220 Manual de usuario
Ingenico
Ingenico iCMP Manual de usuario
Ingenico
Ingenico AXIUM RX7000 Manual de usuario
Ingenico
Ingenico Link/2500 Manual de instrucciones
Ingenico
Ingenico Move 5000 Manual de usuario
Ingenico
Ingenico Desk Series Manual de usuario
Ingenico
Ingenico iwl255 Manual de usuario
