直接碰觸會燙傷，降溫1.5⼩時後再⾏碰觸 ⾼溫
物件
移動零件！
移動路徑上
請保持淨空
Keep body pa rts
out of the
motio n path
Moving Parts
Hot
Parts
Do not touch unless wait 1.5 hour
after turning off the power
Hot
Parts
燙
9.機台內部黏貼警⽰貼紙處(如下所⽰)，請謹慎操作，避免誤觸。
1. Unpacking the X3 out of the cardboard box before doing the rest of actions.
2. Keep the X3 in a clean, dust-free and dry environment that away from fire is essential for proper operation.
3. Keep the X3 with a clean and free of obstacles build plate as to ensure a successful leveling.
4. X3 generates high temperatures as the nozzle can reach up to 500°C(932°F), the build plate up to 180°C (356°F)
and the heated chamber up to 100°C (212°F) that may cause injury. Never reach inside of the X3 while it is in operation.
5. Avoiding vibrate the components or open the cabinet door during printing by improper operation
as to prevent any damages.
6. Leave the machine do certain action automatically should protect the mainboard caused by reverse current.
7. Remain the structural integrity of the X3 as to ensure the safety and the utility of authorized maintenance.
8. Please aware of the warning labels and operate the X3 carefully.
9. Always read the safety statements, and be aware of the following safety signs when you see them on the printer.
Warnings and Cautions precede the paragraph to which they pertain.
CAUTION
This manual describes the application operation of the precision electronic machine.
Please read and understand the user manual carefully.
Failure to read the manual may lead to personal injury, or damage to the INFINIT Y3DP X3.
If any errors in operating or specific problems,
please contact our technical team via website or Facebook for timely support.
Keep b ody par ts
out of t he
moti on path
Movi ng Par ts
Hot
Parts
Do not touch unless wait 1.5 hour
after turning off the power
Hot
Par ts
