Impex Iron Grip Strength IGS-5683 Manual de usuario

NOTE:

Please read all instructions

carefully before using this

product

Table of Contents

Safety Notice

Hardware Identifier

Assembly Instruction

Parts List

Warranty

Ordering Parts

Model

IGS-5683

Retain This

Manual for

Reference

07-14-06

OWNER'S

MANUAL

IRON GRIP STRENGTH

Standard Bench

IGS-5683

IMPEX® INC.

14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746

Tel: (800) 999-8899 Fax: (626) 961-9966

www.impex-fitness.com

[email protected]

TABLE OF CONTENTS

BEFORE YOU BEGIN...................................................................................... 1

IMPORTANT SAFETY NOTICE....................................................................... 2

HARDWARE IDENTIFIER.....…....................................................................... 4

ASSEMBLY INSTRUCTIONS........................................................................... 6

EXPLODED DIAGRAM.........................................................................……... 10

PARTS LIST…………………………………………………………………………. 11

WARRANTY.................................................................................................… 12

ORDERING PARTS......................................................................................... 12

BEFORE YOU BEGIN

Thank you for selecting the IRON GRIP STRENGTH Standard Bench IGS-

5683 by IMPEX®INC. For your safety and benefit, read this manual carefully

before using the machine. As a manufacturer, we are committed to provide

you complete customer satisfaction. If you have any questions, or find there

are missing or damaged parts, we guarantee you complete satisfaction

through direct assistance from our factory. To avoid unnecessary delays,

please call our TOLL-FREE customer service number. Our Customer

Service Agents will provide immediate assistance to you.

Toll-Free Customer Service Number

1-800-999-8899

Mon. - Fri. 9 a.m. - 5 p.m. PST

www.impex-fitness.com

[email protected]m

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply

whenever you operate a piece of exercise equipment. Be sure to read the entire manual

before you assemble or operate your machine. In particular, note the following safety

precautions:

1. Keep children and pets away from the machine at all times. DO NOT

leave children unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal

symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine

near water or outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear

robes or other clothing that could become caught in the machine. Running

or aerobic shoes are also required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO

NOT use attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or

physician in attendance.

10. Before using the machine to exercise, always do stretching exercises to

properly warm up.

11. Never operate the machine if the machine is not functioning properly.

12. A spotter is recommended during exercise.

CARE AND MAINTENANCE

1. Inspect and tighten all parts before using the machine.

2. The machine can be cleaned using a damp cloth and mild non-abrasive detergent.

DO NOT use solvents.

3. Maximum weight capacity 300 lbs. on the uprights.

4. Maximum weight capacity 100 lbs. on the butterflies.

5. Maximum weight capacity 100 lbs. on the leg developer.

6. Maximum weight capacity 100 lbs. on the arm curl.

7. Maximum user’s weight: 300 lbs.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR

PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE

OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL

INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC.

ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE

SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS. 2

WARNING LABEL PLACEMENT

The Warning Label shown here has been placed on the Cross Brace. If the label is missing or illegible, please

call customer service at 1-800-999-8899 for replacement. Apply the label in location shown.

HARDWARE PACK

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended two or more people assembling this

machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the Left & Right Upright Beams (#1 & 2) by a Cross Brace (#3) in the mid-span.

Align the holes and secure each end of the Cross Brace with one 4 ¾” x 2 ¾” Bracket

(#20), two M10 x 2 ¾” Carriage Bolts (#43), two ∅¾” Washers (#39), and two M10 Aircraft

Nuts (#50).

B.) Place Backrest Adjustment Bar (#8) between the two Upright Beams.

C.) Insert two Crutches (#7) into the top openings on the Upright Beams. Secure them with two

M18 Lock Knobs (#26) through selected holes to obtain desired height of the Supports.

D.) Push four 2 ¾” x 2” End Caps (#25) onto the ends of the two Upright Beams.

DIAGRAM 1

STEP 2 (See Diagram 2)

A.) Attach Main Seat Support (#4) to the Cross Brace (#3). Secure it with a 4 3/8” x 1 ¾”

Bracket (#19), two M10 x 2 ½” Carriage Bolts (#42), two ∅¾” Washers (#39), and two

M10 Aircraft Nuts (#50).

B.) Attach the Leg Developer Holder (#5) to the Main Seat Support (#4). Secure it with two

M10 x 2 ½” Carriage Bolts (#42), ∅¾” Washers (#39), and M10 Aircraft Nuts (#50).

C.)Insert a M12 x 5 ½” Hex Bolt (#45) through the hole on the Right Butterfly (#10). Secure

the Bolt with a M12 Regular Nut (#41). Insert the Bolt through the hole on the Right

Upright Beam (#2) and secure with a M12 Lock Knob (#27).

D.)Insert a Butterfly Handle (#15) through the hole on the Right Butterfly from the rear.

Push a ∅2 ¾” Foam Roll (#22) onto the Handle. Attach a Spring Clip (#24) to the

weight post on the Right Butterfly.

E.) Repeat the Procedures C, D, and E above to install the Left Butterfly (#9).

DIAGRAM 2

STEP 3 (See Diagram 3)

A.) Attach the Leg Developer (#11) to the Leg Developer Holder (#5). Secure it with an Axle

(#54), two M10 x 5/8” Allen Bolts (#47), and two ∅¾” Washers (#39).

B.) Insert two Foam Tubes (#14) halfway through the holes on the Leg Developer. Push four ∅

4” Foam Rolls (#23) onto the Tubes from both ends.

C.)Attach a Spring Clip (#24) onto the weight post on the Leg Developer.

D.)Attach the Arm Curl Pad (#18) to the Arm Curl Stand (#12). Secure it with two M8 x 5/8” Allen

Bolts (#48) and ∅5/8” Washers (#38).

E.) Insert the Arm Curl Stand into the opening on the Leg Developer Holder. Secure it with a M18

Lock Knob (#26) through a selected hole to obtain the desired height for Arm Curl exercise.

DIAGRAM 3

STEP 4 (See Diagram 4)

A.) Attach the two side-holes on the two Backrest Supports (#13) to the pivot on the Main

Seat Support (#4). Align the holes and secure it with one M12 x 7 ¼” Hex Bolt (#44),

two ∅1” Washers (#40), and one M12 Aircraft Nut (#51).

B.) Place the Backrest Board (#16) onto the Backrest Supports. Secure it with four M8 x 1

5/8” Allen Bolts (#49) and ∅5/8” Washers (#38).

C.)Attach the Seat (#17) to the two Seat Brackets (#6) and secure with four M8 x 1 5/8”

Allen Bolts (#49) and ∅5/8” Washers (#38).

D.)Place the Seat Brackets onto the Main Seat Support (#4). Align the holes and secure

each Seat Bracket to the Main Seat Support with one M10 x 2 ½” Allen Bolt (#46), two

Ø ¾” Washers (#39), and one M10 Aircraft Nut (#50). DIAGRAM 4

Tabla de contenidos

Otros manuales de Gimnasio en casa de Impex

Impex

Impex MWB-20101 Manual de usuario

Impex

Impex MARCY MWM-7150 Manual de usuario

Impex

Impex NS-40503RW Instrucciones de instalación y funcionamiento

Impex

Impex COMPETITOR WM-1505 Manual de usuario

Impex

Impex Powerhouse Club PHC 750 Manual de usuario

Impex

Impex MARCY PRO 5 Manual de usuario

Impex

Impex MARCY PRO PM-2084 Instrucciones de instalación y funcionamiento

Impex

Impex Powerhouse Elite PHE 9000 Manual de usuario

Impex

Impex MARCY MWM 1801 Manual de usuario

Impex

Impex MARCY PLATINUM MP 1100 Manual de usuario

Impex

Impex Circuit Fitness AMZ-600CG Manual de usuario

Impex

Impex MCB-5700 Manual de usuario

Impex

Impex APEX TSA-499 Manual de usuario

Impex

Impex MARCY DIAMOND ELITE MD-857 Manual de usuario

Impex

Impex MARCY MWB-479 Manual de usuario

Impex

Impex MARCY DIAMOND ELITE SM-1050 Manual de usuario

Impex

Impex MARCY DIAMOND MD-1559 Manual de usuario

Impex

Impex Marcy SM-8117 Manual de usuario

Impex

Impex MARCY DELUXE SM-5870 Manual de usuario

Impex

Impex PM-4510 Manual de usuario

Impex

Impex MARCY MWM-1558 Manual de usuario

Impex

Impex MWM 1800 Manual de usuario

Impex

Impex PM-888 Manual de usuario

Impex

Impex MARCY MWB-719 Manual de usuario

Manuales populares de Gimnasio en casa de otras marcas

Horizon Fitness

Horizon Fitness OXFORD 6 Manual de usuario

Energetics

Energetics Multi Trainer 5.1 Manual de usuario

Matrix

Matrix MG-PL Series Manual de usuario

Reebok

Reebok Tbr2i Manual de operación y mantenimiento

Weider

Weider 8300 Hard Drive Manual de usuario

Pure Fitness

Pure Fitness 8526HE Manual de usuario

Weider

Weider 8700 I Guía de inicio rápido

Bowflex

Bowflex Sport 001-6961 Manual de usuario

NordicTrack

NordicTrack E8200 Competition Bench Guía de inicio rápido

Weider

Weider WEMC10161 Manual de usuario

Body Solid

Body Solid GHYP-345 Manual de usuario

Evo

Evo TAHOE 5105 Manual de usuario

cardiobull

cardiobull RA17 Manual de usuario

ParaBody

ParaBody 40 Manual de usuario

JLL

JLL Ventus Pro Air Power Manual de usuario

Trojan

Trojan Colorado 370 Manual de usuario

Octane Fitness

Octane Fitness xRide xR650 Manual de usuario

Precor

Precor Discovery Series Manual de usuario