Impex MWM 1800 Manual de usuario

NOTE:

Please read all instructions

carefully before using this

product

Safety Notice

Hardware Identifier

Assembly Instruction

Parts List

Resistance Chart

Warranty

Ordering Parts

Model

MWM 1800

Retain This

Manual for

Reference

08-28-01

OWNER'S

MANUAL

MARCY HOME GYM

MWM 1800

IMPEX FITNESS PRODUCTS

14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746

Tel: (800) 999-8899 Fax: (626) 961-9966

www.impex-fitness.com

[email protected]

TABLE OF CONTENTS

BEFORE YOU BEGIN....................................................................................……….. 1

IMPORTANT SAFETY NOTICES...................................................................……….. 2

HARDWARE IDENTIFIER.....….....................................................................……….. 3

ASSEMBLY INSTRUCTIONS.........................................................................……….. 4

HOW TO USE..................................................................................................………. 21

PARTS LIST…………………………………………………………………………………..22

RESISTANCE CHART………….......................................................................………. 23

WARRANTY.................................................................................................…………. 24

ORDERING PARTS.......................................................................................…………24

BEFORE YOU BEGIN

Thank you for selecting the MARCY MWM 1800 HOME GYM by IMPEX

FITNESS PRODUCTS. For your safety and benefit, read this manual

carefully before using the machine. As a manufacturer, we are committed to

provide you complete customer satisfaction. If you have any questions, or

find there are missing or damaged parts, we guarantee you complete

satisfaction through direct assistance from our factory. To avoid

unnecessary delays, please call our TOO-FREE customer service number.

Our Customer Service Agents will provide immediate assistance to you.

Toll-Free Customer Service Number

1-800-999-8899

Mon. – Fri. 9 a.m. – 5 p.m. PST

www.impex-fitness.com

[email protected]m

IMPORTANT SAFETY NOTICE

PRECAUTIONS

This exercise machine is built for optimum safety. However, certain precautions apply

whenever you operate a piece of exercise equipment. Be sure to read the entire manual

before you assemble or operate your machine. In particular, note the following safety

precautions:

1. Keep children and pets away from the machine at all times. DO NOT

leave children unattended in the same room with the machine.

2. Only one person at a time should use the machine.

3. If the user experiences dizziness, nausea, chest pain, or any other abnormal

symptoms, STOP the workout at once. CONSULT A PHYSICIAN

IMMEDIATELY.

4. Position the machine on a clear, leveled surface. DO NOT use the machine

near water or outdoors.

5. Keep hands away from all moving parts.

6. Always wear appropriate workout clothing when exercising. DO NOT wear

robes or other clothing that could become caught in the machine. Running

or aerobic shoes are also required when using the machine.

7. Use the machine only for its intended use as described in this manual. DO

NOT use attachments not recommended by the manufacturer.

8. Do not place any sharp object around the machine.

9. Disabled person should not use the machine without a qualified person or

physician in attendance.

10. Before using the machine to exercise, always do stretching exercises to

properly warm up.

11. Never operate the machine if the machine is not functioning properly.

WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT

YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS

OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH

PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS

EQUIPMENT. IMPEX INC. ASSUMES NO RESPONSIBILITY FOR PERSONAL

INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF

THIS PRODUCT.

SAVE THESE INSTRUCTIONS.

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches.

NOTE: It is strongly recommended this machine to be assembled by two or more people to

avoid possible injury.

STEP 1 (See Diagram 1)

A.) Attach the Left Base Frame (#15) to the Right Base Frame (#3). Secure them with one

Bracket (#55), two M10 x 2 ¾” Carriage Bolts (#70), two ∅¾” Washers (#50), and two M10

Aircraft Nuts (#81).

DIAGRAM 1

STEP 2 (See Diagram 2)

A.) Attach Right Vertical Beam (#6) to the Right Base Frame (#3). Secure it with two M10 x 2

¾” Carriage Bolts (#70), ∅¾” Washers (#50), and M10 Aircraft Nuts (#81).

B.) Attach the Right Seat Support (#2) to the Right Base Frame (#3). Secure it with one M10

x 2 ¾” Carriage Bolt (#70), ∅¾” Washer (#50), and M10 Aircraft Nut (#81).

C.)Attach the Right Seat Support (#2) to the Right Vertical Beam (#6). Secure it with two

M10 x 2 ¾” Carriage Bolts (#70), ∅¾” Washers (#50), and M10 Aircraft Nuts (#81).

D.)Attach the Leg Press Frame (#1) to the Right Base Frame (#3). Secure it with one M12 x

3” Allen Bolt (#74), two ∅1” Washers (#51), and one M12 Aircraft Nut (#82). NOTE: Do

not over tighten the bolt. Make sure the Leg Press Frame is able to swivel.

E.) Attach the Leg Press Support Frames (#28) to both sides of the Leg Press Frame (#1).

Secure them together with two M10 x 2 ¾” Carriage Bolts (#70), ∅¾” Washers (#50),

and M10 Aircraft Nuts (#81).

DIAGRAM 2

STEP 3 (See Diagram 3)

A.) Align four ∅1” Rubber Bumpers (#63) to the holes on the Right Base Frame (#3). Insert the

four Guide Rods (#16) through the Rubber Bumpers into the holes on the Right Base Frame

(#3). Slide two Selector Stems (#27) onto the Guide Rods. Insert a Selector Rod (#24)

through the hole on each Selector Stem (#27). Secure each Selector Rod (#24) to the

Selector Stem (#27) with two M10 x 1” Allen Bolts (#67) and ∅¾” Washers (#50). Please

note this machine comes with 18 plates, 9 to each stack. You can purchase another 5 more

plates (Model no. WK51) in the future to increase the weights. It is strongly recommended to

spay lubricant such as WD-40 on the two Guide Rods to minimize friction.

B.) Attach the Right Upper Frame (#7) to the top of Right Vertical Beam (#6), and the four Guide

Rods (#16). Make sure the Guide Rods are inserted into the holes on the Upper Frame.

C.) Secure the Upper Frame (#7) to the Right Vertical Beam (#6) with one Bracket (#55), two

M10 x 2 ¾” Carriage Bolts (#70), ∅¾” Washers (#50), and M10 Aircraft Nuts (#81).

D.) Secure the Upper Frame to the Guide Rods with four M12 x 1” Allen Bolts (#73) and ∅1”

Washers (#51).

E.) Carefully tip over the machine with a help of another person. Secure the Guide Rods (#16)

to the Right Base Frame (#3) with four ∅1” Washers (#51) and M12 x 1” Allen Bolts (#73).

STEP 4 (See Diagram 4)

A.) Attach the Left Vertical Beam (#17) to the Left Base Frame (#15). Secure it with two M10 x

2 ¾” Carriage Bolts (#70), ∅¾” Washers (#50), and M10 Aircraft Nuts (#81).

B.) Attach the Left Upper Frame (#18) to the Left Vertical Beam (#17), and the Right Upper

Frame (#7). Secure the Frame to the Vertical Beam with one Pulley Bracket (#20), two M10

x 2 ¾” Carriage Bolts (#70), two ∅¾” Washers (#50), and two M10 Aircraft Nuts (#81).

Secure the Left Frame to the Right Frame with one Bracket (#55), two M10 x 2 ¾” Carriage

Bolts (#70), two ∅¾” Washers (#50), and two M10 Aircraft Nuts (#81).

C.)Attach the Left Seat Support (#14) to the Left Base Frame (#15) and the Left Vertical Beam

(#17). Secure the Seat Support to the Left Base Frame with one M10 x 2 ¾” Carriage Bolt

(#70), ∅¾” Washer (#50), and M10 Aircraft Nut (#81). Secure the Seat Support to the

Vertical Beam with one Bracket (#55), two M10 x 2 ¾” Carriage Bolts (#70), ∅¾” Washers

(#50), and M10 Aircraft Nuts (#81).

D.)Attach the Leg Developer (#13) to the bracket on the Left Seat Support (#14). Secure it with

one M10 x 2” Axle (#91), two M10 x ¾” Allen Bolts (#66) and ∅¾” Washers (#50).



STEP 5 (See Diagram 5)

A.) Attach the Front Press Base (#4) to the Right Base Frame (#3). Secure it with a

M10 x 9 ¼” Axle (#85), two ∅¾” Washers (#50), and two M10 Aircraft Nuts

(#81).

B.) Attach the two Front Presses (#5) to the Front Press Base (#4). Secure each

Front Press with two M10 x 2 ¾” Carriage Bolts (#70), ∅¾” Washers (#50), and

M10 Aircraft Nuts (#81). DIAGRAM 5

STEP 6 (See Diagram 6)

A.) Insert the axle on the Left Butterfly (#8) through the hole on the Right Upper Frame

(#7) from the bottom up. Slide a ∅1 ½” Washer (#52) and ∅1 3/8” Lock Ring (#92)

onto the Axle. Align the holes and secure the Ring with a M6 x 1 5/8” Hex Bolt (#77)

and M6 Aircraft Nut (#80). Repeat the same procedure to install the other side.

B.) Push Butterfly Foam Rolls (#40) onto each Butterfly.

DIAGRAM 6

Tabla de contenidos

Otros manuales de Gimnasio en casa de Impex

Impex

Impex COMPETITOR CB-349 Manual de usuario

Impex

Impex MARCY MWB-479 Manual de usuario

Impex

Impex MWB-715N Manual de usuario

Impex

Impex MWM 982 Manual de usuario

Impex

Impex IGS-8859 Manual de usuario

Impex

Impex IGS-6500 Manual de usuario

Impex

Impex MWB-36780B Manual de usuario

Impex

Impex Powerhouse Club PHC 710 Manual de usuario

Impex

Impex Apex TC-3500 Manual de usuario

Impex

Impex MARCY MWB 758 Manual de usuario

Impex

Impex Marcy Diamond Elite MD-MXM6 Manual de usuario

Impex

Impex Iron Grip Sport IGS-02 Manual de usuario

Impex

Impex WM 1402 Manual de usuario

Impex

Impex MARCY MWM-990 Manual de usuario

Impex

Impex IRON GRIP STRENGTH TSA-9900 Manual de usuario

Impex

Impex Marcy SB-685 Manual de usuario

Impex

Impex MARCY CLUB MKM-81010 Manual de usuario

Impex

Impex MARCY MWB 850 Manual de usuario

Impex

Impex MARCY MWM-7150 Manual de usuario

Impex

Impex MARCY DIAMOND ELITE MD-2080 Manual de usuario

Impex

Impex PM-888 Manual de usuario

Impex

Impex MARCY DIAMOND ELITE MD-8850 Manual de usuario

Impex

Impex Powerhouse PHC-696 Manual de usuario

Impex

Impex IRON GRIP STRENGTH TSA-5682 Manual de usuario

Manuales populares de Gimnasio en casa de otras marcas

Horizon Fitness

Horizon Fitness OXFORD 6 Manual de usuario

Energetics

Energetics Multi Trainer 5.1 Manual de usuario

Matrix

Matrix MG-PL Series Manual de usuario

Reebok

Reebok Tbr2i Manual de operación y mantenimiento

Weider

Weider 8300 Hard Drive Manual de usuario

Pure Fitness

Pure Fitness 8526HE Manual de usuario

Weider

Weider 8700 I Guía de inicio rápido

Bowflex

Bowflex Sport 001-6961 Manual de usuario

NordicTrack

NordicTrack E8200 Competition Bench Guía de inicio rápido

Weider

Weider WEMC10161 Manual de usuario

Body Solid

Body Solid GHYP-345 Manual de usuario

Evo

Evo TAHOE 5105 Manual de usuario

cardiobull

cardiobull RA17 Manual de usuario

ParaBody

ParaBody 40 Manual de usuario

JLL

JLL Ventus Pro Air Power Manual de usuario

Trojan

Trojan Colorado 370 Manual de usuario

Octane Fitness

Octane Fitness xRide xR650 Manual de usuario

Precor

Precor Discovery Series Manual de usuario