iHome iBT280 Manual de usuario
Model: iBT280
instruction manual
Bluetooth Wireless
Color Changing
Dual Alarm FM Clock Radio
with USB Charging
Questions? Contact Customer Service at 1-800-288-2792
iBT280
Introduction
Thank you for purchasing the iHome iBT280. This product is designed to provide high
quality wireless sound for your Bluetooth audio device and several color modes to
enhance your listening experience.
This instruction booklet explains the basic operation and care of the unit. Please read it
carefully and keep for future reference.
• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish.
A cloth or other protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger
cleaning agents, such as benzene, thinner or similar materials can damage the surface
of the unit.
1
Maintenance
iBT280
Table of Contents
2
Meet Your iBT280 ............................................................................................................................................4
The Display/Setting Up the Unit............................................................................................................... 5
Setting the Time .............................................................................................................................................. 6
Setting and Using the Alarms.................................................................................................................... 7
Previewing Alarms/Turning Alarms On and Off/Snooze Mode/Dimmer Mode................ 8
Listening to FM Radio/Using the Unit in Other Countries........................................................... 9
Color Change Mode/Sleep Mode......................................................................................................... 10
Bluetooth Pairing/Manual Pairing .........................................................................................................11
Playing Audio Via Bluetooth .....................................................................................................................12
Using the Speakerphone feature.............................................................................................................12
Playing Audio Via Aux-in ...........................................................................................................................13
Charging Devices via USB Port................................................................................................................13
Replacing/Installing Backup Batteries ................................................................................................ 14
Troubleshooting...............................................................................................................................................15
Consumer Product Safety Guide ......................................................................................................16-17
FCC Information ..............................................................................................................................................18
Warranty..............................................................................................................................................................19
iBT280
3
Included
• iBT280 system
• 100V-240V universal AC adapter
AC adapter
iBT280
iBT280
Meet Your iBT280
Top
4
Back
Bluetooth Pairing Button
Backup Battery
Compartment
Remove pull tab
USB charging port
Plug in USB cable
to charge device
Aux-in jack
Connect included audio cable
here and to audio device
headphone/aux-out jack
Time Set Button
Daylight Saving Time Switch
Press and hold for
time setting
FM radio antenna
Extend antenna for best reception
(do not strip, alter or attach
to other antennas)
Mode Button
Microphone
Play/Pause and Presets Button
Set and select FM radio presets
Answer Call and
Forward/ Plus Settings Button
Press to raise selected setting
End Call and
Reverse/Minus Settings Button
Press to lower selected setting
Snooze/Dimmer Button
Press to silence alarm for selected time
Press to adjust brightness during standard
operation (not during alarm mode)
Power/Alarm Reset Button
Press to turn unit ON or OFF,
reset alarm when sounding
Raise Volume Button
Raise volume
Lower Volume Button
Lower volume
Set and arm/disarm Alarm 2
Alarm 2 Button
Set and arm/disarm Alarm 1
Alarm 1 Button
Press to cycle color settings
Color Button
DC Adapter Jack
Plug in AC adaptor cable and
connect to outlet
Press to set sleep duration Press to set select mode
Sleep Mode Button
Press and hold to pair with a device
The Display
Setting Up the Unit
Connect the included AC adapter to the DC jack located
on the back of the unit and connect the other end to a
working wall outlet. Extend FM antenna.
A CR2450 3V battery is installed for battery backup.
Remove the pull tab from the backup battery
compartment located on the bottom of the unit before
using the unit. See page 13 for more on installing and
replacing backup batteries.
5
Using the iBT280
Wake to indicator
PM indicator
AM indicator
Sleep mode indicator
Time display
Volume indicator
Low Backup Battery indicator
Bluetooth Pairing indicator
Mode indicators:
Aux, Bluetooth, FM
Mode/Bedtime Sleep Timer/
FM station/date/alarm time display
Remove Battery pull tab
before use
Alarm 1 and 2 indicators
Alarm is armed and will sound
at set time
RESET
RESET
TEST
TEST
6
Setting the Time
DST Switch
This unit has a Daylight Saving Time (DST) switch located on the back. By default, it is in Auto position
and will automatically adjust the time at the start and end of Daylight Saving Time in March and
November. If you are in a location that does not observe Daylight Saving Time or wish to set manually,
move the switch to +1 to add an hour or to -1 to subtract an hour.
1. Press and hold the Time Set Button. The time will flash and a beep will sound. Press the – or + Button
to set the correct time (press and hold for rapid setting). Take care to set the correct AM or PM time.
The AM and PM Indicators are located to the left of the time digits.
2. Press the Time Set Button. The year will flash. Press the – or + Button to set the correct year.
3. Press the Time Set Button again. The date will flash. Press the – or + Button to set the correct date
(press and hold for rapid setting).
TIP: Press either the or Button when display is flashing during clock setting to toggle the
display between 24 hour (military) and 12 hour (standard) display mode. The AM/PM indicators will
not appear when display is in 24 hour mode.
4. Press the Time Set Button again (or no button press within 10 seconds) to exit clock setting mode.
2 beeps will confirm clock setting is complete.
Using the iBT280
7
Setting and Using the Alarms
This unit has a dual alarm system so you can set two separate alarms to different alarm times and sources.
Setting the Alarms
Note: Alarm 1 and Alarm 2 are set the same way; Alarm Button below means the button ( or ) for
whichever alarm you are setting.
1. Press and hold the or Button until the alarm icon flashes, the alarm time flashes on the lower part
of the display and a beep sounds. Press and release the – or + Button to set the alarm time (press and
hold for faster setting). Take care to set the correct AM or PM time.
2. Press and release the Alarm Button again to confirm the set alarm time. The current wake schedule will
flash. Press and release the – or + Button as needed to select “7 DAYS” (alarm sounds every day), “5
DAYS” (alarm sounds on week days) or “2 DAYS” (alarm sounds only on weekend).
3. Press and release the Alarm Button again to confirm the alarm schedule. The wake to icon will light and
the current alarm source will flash. Press the – or + Button as needed to select the alarm wake-to
source: Bluetooth, FM radio or Tone.
Wake to Bluetooth: when selected, you will wake to your most recent Bluetooth track
Wake to FM radio: The default wake to source is the current FM radio station. Press and release the
– or + Button to set a different station (press and hold to scan to the next clear station). To wake to
a preset station, press the Presets Button to cycle to the desired preset (see page 9 for details on
setting presets).
Wake to Tones: There are 4 tones to choose from. Press and release the – or + Button to audition and
select the desired alarm tone.
4. Press and release the Alarm Button again, then press and release the – or + Button to adjust the alarm
volume. Note that alarm volume is stored separately from standard volume.
5. Press and release the Alarm Button again, then press and release the – or + Button to set the color LED
wake cycle: Slow Fade, Fast, One Color, Pulse to Music, Random, Dawn, or None.
6. Press and release the Alarm Button again (or no button within 10 seconds) to exit the alarm setting
mode. 2 beeps will confirm alarm setting is complete. The alarm will be armed once set and the
corresponding alarm icon will light up. The lower part of the display will show the earliest set alarm time.
Using the iBT280
8
Previewing the Alarm and Turning the Alarm On/Off
At the set time, the alarm will sound for 1 hour.
1. To turn off the sounding alarm and reset it to come on at the same time the following day, press and
release the Power Button or the relevant Alarm Button. The alarm sound will stop and “OFF” will
apear on the display briefly but the alarm icon will remain on the display, indicating the alarm is armed.
2. Press and release the desired Alarm Button during normal operation (alarm is not sounding) as needed
to preview the current alarm time and wake-to source, arm the alarm (alarm icon is present) or to cancel
it (no alarm icon).
Snooze Mode
1. Press and release the Snooze/Dimmer Button while alarm is sounding to temporarily silence the alarm
for the set snooze duration (default is 9 minutes).
2. To adjust the snooze duration: press and hold the Snooze/Dimmer Button during normal operation
(when alarm is not sounding). The current snooze duration will flash on the display. Press the – or +
Button to adjust the snooze time from 01 - 29 minutes. Press and release the Snooze/Dimmer Button
again (or no button within 10 seconds). Two beeps will sound to confirm snooze setting and return unit
to normal operation.
Dimmer Mode
When unit is in normal mode (no alarm is sounding), press the Snooze/Dimmer Button to cycle
through display brightness settings, including OFF. Settings affect both the display and cabinet LED.
Dimmer function will not work during FADE color change mode. When LED color mode is set to
NONE, pressing the Snooze/Dimmer Button will place unit in 1 COLOR mode with white backlight.
Press the Color Button again to return color mode to OFF.
Using the iBT280
Listening to FM Radio
Setting up the Antenna
Extend the FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.
Tuning and Playing the Radio
1. Press and release the Mode Button as needed to select FM radio mode.
2. When FM mode is selected, press the – or + Button to tune the radio to a desired station. The current
radio frequency appears in the lower right part of the display. Press and hold the – or + Button for a
few seconds to scan for the next clear station.
3. To memorize a station as a preset:
A. Press the Presets Button as needed to step through the 6 presets (P1 - P6) to the number you
wish to assign, and then hold the Presets Button until the selected preset number begins flashing
in the display and 1 beep sounds.
B. Press the – or + Button to tune the radio to a desired station. Hold briefly to have the radio
autoscan/search for the next clear station.
C. Press the Presets Button to confirm the setting, two confirmation beeps will confirm the setting
and the preset number you wish to assign. Repeat steps A-C to preset up to 6 stations.
4. To listen to a preset station, press the Presets Button to choose the desired preset.
5. Press the or Button on the unit to adjust the system volume.
Using the Unit in Other Countries
Different regions of the world use different FM radio frequency steps and ranges. You will need to select
the one that matches the standards in your region (USA, EUROPE, JAPAN, AUSTRALIA, or CHINA). The
default setting is USA; if you live in the US, you may skip this section.
1. Make sure the unit is OFF (not playing in any mode). Press and hold the Mode Button for about 5
seconds until “USA” appears in the lower right part of display and 1 beep sounds. Press and release the
– or + Button to select your region.
2. Press and release the Mode Button again (or no button within 10 seconds) to exit the radio frequency
setting mode. Two beeps will confirm radio frequency setting.
9
Using the iBT280
Tabla de contenidos
Otros manuales de Radio reloj de iHome
iHome
iHome iBT233 Manual
iHome
iHome iHC5 Manual de usuario
iHome
iHome iBT29 Manual de usuario
iHome
iHome iBT297v2 Manual de usuario
iHome
iHome ZN90 Manual de usuario
iHome
iHome Hello Kitty Si-B62 Manual de usuario
iHome
iHome iBT38 Manual de usuario
iHome
iHome iP230 Manual de usuario
iHome
iHome iM30 Manual de usuario
iHome
iHome ZN9 Manual de usuario
iHome
iHome IP43 IP43 Manual de usuario
iHome
iHome iH110 Manual de usuario
iHome
iHome iH27 Manual de usuario
iHome
iHome iBN180 Manual de usuario
iHome
iHome iDL100 Manual de usuario
iHome
iHome iPL22 Manual de usuario
iHome
iHome iBT28 Manual de usuario
iHome
iHome iBT290 Manual de usuario
iHome
iHome iBT97 Manual de usuario
iHome
iHome iPL24 Manual de usuario
