iHome iBT233V2 Manual de usuario
iBT233V2 - IB (English)
Size: 153 x 120 mm
Color: print black in white paper (1C + 1C)
Apr. 16, 2018
instruction manual
Cover - P1
Questions? Contact Customer Service at 1-800-288-2792
coverback
Model: iBT233V2
Bluetooth
Dual Alarm Stereo Clock Radio
with Dual USB Charging
Introduction
Thank you for purchasing the iHome iBT233V2. This product is designed to provide high
quality wireless sound for your Bluetooth audio device.
This instruction booklet explains the basic operation and care of the unit. Please read it
carefully and keep for future reference.
•Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish.
A cloth or other protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger
cleaning agents, such as benzene, thinner or similar materials can damage the surface
of the unit.
1
P2
Maintenance
Table of Contents
2
What’s Included ......................................................................................................................................................3
Meet Your iBT233V2............................................................................................................................................ 4
The Display/Setting Up the Unit.....................................................................................................................5
Replacing and Installing Clock Backup Battery......................................................................................6
Setting the Clock/Setting and Using the Alarms.............................................................................. 7-8
Previewing the Alarm and Turning the Alarm On/O.........................................................................8
Snooze/Display Dimmer Button/Sleep Mode/FM Radio...................................................................9
Setting and Using FM Presets .......................................................................................................................10
Using the Voice Command Feature............................................................................................................10
Pairing Your Bluetooth Device ..................................................................................................................... 11
Playing Audio Via Bluetooth .......................................................................................................................... 12
Using the Speakerphone Feature ................................................................................................................ 12
Playing Audio via Aux-In ................................................................................................................................. 13
Charging Devices via USB Port.....................................................................................................................14
Battery Use Cautions and Tips......................................................................................................................15
Consumer Product Safety Guide .................................................................................................................16
FCC Information ................................................................................................................................................... 17
Troubleshooting....................................................................................................................................................18
P3
iBT233V2
3
P4
What’s Included
• iBT233V2 unit
• 100V-240V universal AC adapter
power adapter
iBT233V2
time set aux-in
12V 2.3ADC
iBT233V2
P5
Meet Your iBT233V2
Top
4
Bottom Back
DC Jack
USB Charging PortsTime Set Button
Aux-in Jack
FM Antenna
Answer Call Button
Plus Settings Button
FM/Presets Button
Volume Down/
Volume Up Buttons
Snooze/Display Dimmer Button
Alarm 1 Button
Alarm 2 Button
Voice Command/
Play/Pause Button
Thisdevice complies with Part 15 of the FCC Rules. Operationis subjec t tothe following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received,including interference that may cause undesired operation. CAN ICES-3 (B)/NMB-3(B)
Minus Settings Button
Power/Alarm Reset Button
Bluetooth Button
Sleep ButtonAux Button
End Call Button
Backup Battery
Compartment
FM87.5 - 107.9 MHz
DC 3V, CR2450 x 1
DC 12V, 2.3A
iBT233V2-A-A
FrequencyRange:
Clock Backup:
ACAdaptor:
Service Number:
FCC ID: EMOIBT233 IC: 986B-IBT233
iBT233V2
iBT233V2
Using the
The Display
5
P6
Setting Up the Unit
Connect the included AC adapter to the DC jack
located on the back of the unit and connect the other
end to a working wall outlet. Extend FM antenna.
Remove battery pull tab before use
1 CR2450 battery is installed for battery backup. See
page 6 for details on replacing the backup battery.
Alarm 1 Active Indicator Alarm 2 Active Indicator
PM Indicator
Time Display
RESET
RESET
TEST
TEST
time set aux-in
12V 2.3ADC
P7
6
Replacing and
Installing Clock Backup Battery
Note: 1 CR2450 battery is installed with the unit. Remove battery pull tab before using the unit.
This model is equipped with a battery backup circuit that will maintain the time and alarm
time settings in the event of a temporary power interruption. The battery backup circuit will
also operate the buzzer alarm to wake you up at the selected wake up time even if the power
is out. When the backup battery is getting weak or isn’t present, “LO BATT will begin flashing
in the display when the unit is powered on. When you see this flashing indicator you should
replace the backup batteries as soon as possible.
To install/replace the backup battery:
IMPORTANT: When replacing the backup battery be sure to have the
unit connected to the AC outlet to maintain all of your settings,
otherwise it will be necessary to reset the time and alarm time after
the batteries are replaced.
1. Use a Phillips screwdriver to unscrew and remove the battery
door located on the bottom of the unit. If replacing battery,
remove the exhausted battery.
2. Insert 1 fresh CR2450 battery in the backup battery compartment.
Make sure the ”+” node of the battery is facing you.
3. Close the battery compartment door. Turn the unit o then on to
confirm that the backup battery indicator is not flashing in the
display.
Note: Make sure you dispose of battery properly (see your local regulations).
iBT233V2
Using the
This devicecomplies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received,including inter ferencethat may cause undesired operation. CAN ICES-3 (B)/NMB-3(B)
Replacing Backup
Battery
FM87.5 - 107.9 MH z
DC 3V, CR2450 x 1
DC 12V, 2.3A
iBT233V2-A-A
FrequencyR ange:
Clock Backup:
AC Adaptor:
Service Number:
FCC ID: EMOIBT233 IC: 986B-IBT233
iBT233V2
P8
7
Setting the Clock
1. Press and hold the Time Set Button located on back of the unit for 2 seconds until the
clock display flashes and a beep sounds.
2. Press the or Buttons to adjust the clock to the current time (hold for rapid setting).
Make sure you set the correct AM/PM time. The PM indicator appears to the left of the
display; there is no AM indicator.
3. Press the Time Set Button to confirm the time. The year will flash on the display.
4. Press the or Buttons to adjust the clock to the current year (hold for rapid setting).
5. Press the Time Set Button to confirm the year. The month will flash on the display.
6. Press the or Buttons to adjust the clock to the current month (hold for rapid setting).
7. Press the Time Set Button to confirm the month. The date will flash on the display.
8. Press the or Buttons to adjust the clock to the current date (hold for rapid setting).
9. Press the Time Set Button to confirm the date and exit clock setting mode. 2 beeps will
confirm clock setting is complete.
TIP: To toggle the clock display between standard 12 hour time and 24 hour (“military”) time
display, press the Alarm Button or Alarm Button while the display is flashing during clock
setting.
Setting and Using the Alarms
This unit features dual alarms which can be set to dierent times and alarm sources. Each is set
in the same way. Instructions are given as “Alarm Button”; use Alarm Button or Alarm
Button to set respective alarms.
Note: Each step must be completed while display is flashing or step will time-out with any
changes saved.
iBT233V2
Using the
8
P9
Setting and Using the Alarms (Continued)
1. Press and hold the Alarm Button for 2 seconds until the alarm time display, alarm button
and alarm icon flash. A beep sounds.
2. Press the or Buttons to adjust the alarm time to the desired time (hold for rapid
setting). Make sure you set the correct AM/PM alarm time. The PM indicator appears to the
left of the display; there is no AM indicator.
3. Press the Alarm Button to confirm the alarm time setting. The alarm schedule will flash.
4. Press the or Buttons to cycle to the desired schedule: “7 d” (every day), “5 d” (week
days) or “2 d” (weekends).
5. Press the Alarm Button to confirm the alarm schedule setting. The wake-to source will flash.
6. Press the or Buttons to select the desired wake to alarm source: Bluetooth, FM radio
or selected tone.
Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is
detected at wake time, the alarm will default to tone one (”t1”).
Wake to Radio: Press the Alarm Button to confirm. Press the Presets Button to select an FM
preset to wake to, or press the or Buttons to tune in a desired wake to station. (To set
Presets, see Setting and Using FM Presets on page 10.)
Wake to Tones: You will wake to the selected tone. Press the Alarm Button to confirm, then
press the or Buttons to preview and select a desired tone (t1 -t4).
7. Press the Alarm Button to confirm the wake to source. The alarm volume will flash.
8. Press the or Buttons to select the desired alarm volume.
9. Press the Alarm Button to complete alarm setting and exit alarm setting mode. 2 beeps will
confirm alarm setting is complete. The alarm icon will remain on the display, indicating the
alarm is armed.
8. To turn o a sounding alarm and reset it to come on the next day at the same time, press
the Power Button or the associated alarm button ( or ) to reset alarm.
Previewing the Alarm and Turning the Alarm On/O
Press and release the desired Alarm Button as needed to toggle the alarm ON (indicated by the
alarm icon and lit alarm button) or OFF (no alarm icon/alarm button is not lit).
iBT233V2
Using the
P10
9
Snooze/Display Dimmer Button
1. To program Snooze, press and hold the Snooze/Display Dimmer Button for 2 seconds
during normal operation (when no alarm is sounding). A beep will sound.
2. Press the or Buttons to select the desired snooze time (between 1 and 29 minutes).
3. Press and release the Snooze/Display Dimmer Button to confirm Snooze setting. 2 beeps
will sound.
4. While the alarm is sounding, press and release the Snooze/Display Dimmer Button to
temporarily silence the alarm for the set duration (9 minutes is the default). Snooze can be
used several times during alarm.
5. To adjust the brightness of the display, press and release the Snooze/Display Dimmer
Button during normal operation (when no alarm is sounding) to cycle through the
brightness display settings, including turning the display o. When the unit is powered on
it will always default to the high (brightest) display setting.
Sleep Mode
This unit allows you to sleep to the current sound source for a set time before turning the unit o.
1. To set Sleep time, press and release the Sleep Button as needed to cycle to the desired
sleep duration: 120, 90, 60, 30 or 15 minutes or OFF (turns the unit o).
2. Press the or Buttons to adjust the sleep volume on the unit. Note that the sleep volume
setting is stored separately from other volume settings.
FM Radio
Extend the FM antenna for best reception.
1. Press and release the FM Presets Button. The current FM radio frequency appears on the
display.
2. Press the or Buttons to tune the radio to the desired station (hold to scan for the next
clear station).
3. Press the or Buttons to adjust the volume on the unit.
4. When you are through listening, press the Power Button to turn the unit o.
iBT233V2
Using the
Tabla de contenidos
Otros manuales de Radio reloj de iHome
iHome
iHome iP230 Manual de usuario
iHome
iHome iDL100 Manual de usuario
iHome
iHome iDL95 Manual de usuario
iHome
iHome iBT28 Manual de usuario
iHome
iHome IM29 Manual de usuario
iHome
iHome iHM50R Manual de usuario
iHome
iHome iBT230 Manual de usuario
iHome
iHome iBN97 Manual de usuario
iHome
iHome IP45 Manual de usuario
iHome
iHome iBT97 Manual de usuario
iHome
iHome iBN97 Manual de usuario
iHome
iHome iBT29 Manual de usuario
iHome
iHome iH12 Manual de usuario
iHome
iHome iBT31 Manual de usuario
iHome
iHome iBN180 Manual de usuario
iHome
iHome iM30 Manual de usuario
iHome
iHome HBH34 Manual de usuario
iHome
iHome iPL23 Manual de usuario
iHome
iHome iBT29 Manual de usuario
iHome
iHome iD83 Manual de usuario
