IFM Electronic Efector200 OGS50 Series Manual de usuario

Operating instructions

Through-beam sensor

OGS50x

OGE50x

704071 / 01 02 / 2008

1 Functions and features

The through-beam sensor detects objects and materials without contact and

indicates their presence by a switching signal.

For the range see the type label.

2 Installation

transmitter receiver

Install the receiver (OGE...) and secure it to a bracket.►

Align the transmitter (OGS...) to the receiver and fix it.►

3 Electrical connection

Disconnect power.►

Connect the unit as follows.►

Transmitter

Cable Connector Pin connection

L+ BN pin 1

L- BU pin 3

— — pin 4

— — pin 2

Core colours BN = brown, BU = blue, BK = black

Receiver

Cable Connector Pin connection

L+ BN pin 1

L- BU pin 3

load BK pin 4

— — pin 2

Core colours BN = brown, BU = blue, BK = black

4 Operating and display elements

transmitter receiver

�

  

LED1:

[OUT off]2:

[OUT on]3:

4 Settings

4.1 The receiver is to switch when the object is detected

Position the object.►

receiver transmitter

Press [OUT on] for 2 s.►

The sensitivity is set to the object.>

The LED flashes.>

Remove the object.►

receiver transmitter

Press [OUT off].►

The sensitivity is set without object.>

The LED goes out. The programming is finished.>

4.2

The receiver is not to switch when the object is detected

Position the object (see figure 1) and press [OUT off] for 2►

Remove the object (see figure 2) and press [OUT on].►

The settings can also be carried out first without object (step 1) and then with

object (step 2).

4.3 Programming unsuccessful

LED flashes quickly, 8 Hz.>

Possible causes

Insufficient difference in measurements.•

Max. programming time of 15 min. exceeded.•

4.4 Setting of maximum sensitivity

Align the receiver so that no light is received.►

The receiver is to switch when the object is detected.

First press [OUT on] and then [OUT off].►

The receiver is to switch when the object is not detected.

First press [OUT off], then [OUT on].►

4.5 Locking or unlocking the buttons

The unit can be locked electronically to prevent unintentional settings.

Press [OUT on] and [OUT off] simultaneously for►

10 s.

Acknowledgement is indicated by a change of the>

LED status.

5 Operation

Check whether the sensors operate correctly.►

The receiver LED lights when the switching output is switched.>

6 Maintenance

Keep the lenses of the sensors free from soiling.►

For cleaning do not use any solvents or cleaning agents which could damage►

the plastic lenses.

Technical data and further information at www.ifm.com

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Accesorios de IFM Electronic

IFM Electronic

IFM Electronic efector100 GG507S Manual de usuario

IFM Electronic

IFM Electronic Efector 200 Manual de usuario

IFM Electronic

IFM Electronic LR2759 Manual de usuario

IFM Electronic

IFM Electronic Efector 500 PL2058 Manual de usuario

IFM Electronic

IFM Electronic Efector 100 Manual de usuario

IFM Electronic

IFM Electronic Efector 200 OL Series Manual de usuario

IFM Electronic

IFM Electronic efector 190 DTE820 Manual de usuario

IFM Electronic

IFM Electronic efector200 OGT3 Series Manual de usuario

IFM Electronic

IFM Electronic GF711S Manual de usuario

IFM Electronic

IFM Electronic efector250 E2M250 Manual de usuario

IFM Electronic

IFM Electronic VNB001 Manual de usuario

IFM Electronic

IFM Electronic PY995 Series Manual de usuario

IFM Electronic

IFM Electronic efector 300 SU7000 Manual de usuario

IFM Electronic

IFM Electronic efector 300 SM6004 Manual de usuario

IFM Electronic

IFM Electronic efector160 LI214 Series Manual de usuario

IFM Electronic

IFM Electronic efector180 IX5010 Manual de usuario

IFM Electronic

IFM Electronic Efector 300 Manual de usuario

IFM Electronic

IFM Electronic O3M151 Manual del propietario

IFM Electronic

IFM Electronic Efector 200 OL Series Manual de usuario

IFM Electronic

IFM Electronic efectro 200 Manual de usuario

IFM Electronic

IFM Electronic efector500 PC3 Series Manual de usuario

IFM Electronic

IFM Electronic efector200 OGP3 Series Manual de usuario

IFM Electronic

IFM Electronic Efector 300 SA1004 Manual de usuario

IFM Electronic

IFM Electronic Efector 250 Series Guía de referencia

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manual de usuario