IFM Electronic Efector 200 OPU200 Manual de usuario

Operating instructions

optical fork sensor

OPU200

OPU200 / 00 02 / 2009

Contents

1 Preliminary note....................................................................................................3

1.1 Symbols used.................................................................................................3

2 Functions and features.........................................................................................3

3 Installation ............................................................................................................3

4 Operating and display elements...........................................................................3

5 Electrical connection.............................................................................................4

6 Setting..................................................................................................................5

6.1 Setting of the output function.........................................................................5

6.2 Sensitivity setting...........................................................................................5

7 Operation..............................................................................................................6

8 Maintenance, repair and disposal ........................................................................7

Preliminary note1

Symbols used1.1

►Instruction

> Reaction, result

→Cross-reference

Important note

Non-compliance can result in malfunctions or interference.

Functions and features2

The optical fork sensor detects objects and materials without contact and indicates

their presence by a switching signal.

Installation3

T: transmitter; R: receiver

Secure the optical fork sensor (OPU...) to a bracket.►

Operating and display elements4

LED yellow1:

output function switch2:

sensitivity potentiometer3:

Electrical connection5

The unit must be connected by a qualified electrician.

The national and international regulations for the installation of electri-►

cal equipment must be adhered to.

Ensure voltage supply to EN 50178, SELV, PELV.►

The following indications apply if there is a UL listing mark on the product:

For use in NFPA 79 applications only. Adapters providing field wiring►

means are available from the manufacturer. Refer to manufacturers

information.

The device shall be supplied from an isolating transformer having a►

secondary Listed fuse rated

a) max 5 amps for voltages 0...20 Vrms (0...28.3 Vp) or

b) 100/Vp for voltages of 20...30 Vrms (28.3...42.4 Vp).

Disconnect power.►

Connect the unit as follows:►

Automatic PNP / NPN detection

DC PNP

L+

pin 1 = L+

pin 3 = L-

pin 4 = load

DC NPN

pin 1 = L+

pin 3 = L-

pin 4 = load

On power up, the unit detects automatically if the switching output is con-

nected to L- (= PNP) or to L+ (= NPN).

Setting6

Setting of the output function6.1

NO NC

A: cover; B: output function switch

Remove the cover (A).1.

Set the output function (NO/NC) via the switch (B) using a screwdriver.2.

Refit the cover (A).3.

Sensitivity setting6.2

The sensor is to switch when the object is detected

Set the setting potentiometer to the lowest sensitivity.►

Position the object to be detected in the detection►

zone.

Increase the sensitivity until the yellow LED lights.►

Remove the object from the detection zone.►

The yellow LED goes out. The setting operation is>

completed.

The sensor is not to switch when the object is detected

Set the setting potentiometer to the highest sensitivi-►

ty. The yellow LED is lit.

Position the object to be detected in the detection►

zone.

Reduce the sensitivity until the yellow LED goes out.►

Remove the object from the detection zone.►

The yellow LED is lit again. The setting operation is>

completed.

Operation7

Check whether the unit operates correctly.►

The yellow LED is lit when the output is switched.>

Maintenance, repair, disposal8

Keep the lens of the sensor free from soiling.►

For cleaning do not use any solvents or cleaning agents which could damage►

the lens.

After use dispose of the unit in an environmentally friendly way in accordance►

with the applicable national regulations.

Faulty sensors must only be repaired by the manufacturer.

Technical data and further information at

www.ifm.com →Select your country →Data sheet direct:

Tabla de contenidos

Otros manuales de Accesorios de IFM Electronic

IFM Electronic

IFM Electronic efector 410 JN2300 Guía de aplicación

IFM Electronic

IFM Electronic Efector 200 Manual de usuario

IFM Electronic

IFM Electronic PI7093 Manual de usuario

IFM Electronic

IFM Electronic efector 200 OG laser Manual de usuario

IFM Electronic

IFM Electronic O5D10 series Manual de usuario

IFM Electronic

IFM Electronic efector 200 O5D15 Series Manual de usuario

IFM Electronic

IFM Electronic efector 160 LR8300 Manual de usuario

IFM Electronic

IFM Electronic Efector 500 PP70 Series Manual de usuario

IFM Electronic

IFM Electronic Efectror 200 OGE2 Series Manual de usuario

IFM Electronic

IFM Electronic Efector 410 JN2100 Guía de aplicación

IFM Electronic

IFM Electronic Efector 250 O3M151 Manual del propietario

IFM Electronic

IFM Electronic efector 600 OWF Manual de usuario

IFM Electronic

IFM Electronic efector200 OGP3 Series Manual de usuario

IFM Electronic

IFM Electronic efector300 SI1004 Manual de usuario

IFM Electronic

IFM Electronic TUV NORD Efector 110 GM701S Manual de usuario

IFM Electronic

IFM Electronic LR8300 Manual de usuario

IFM Electronic

IFM Electronic Efector 200 OI Series Manual de usuario

IFM Electronic

IFM Electronic efector250 E2M250 Manual de usuario

IFM Electronic

IFM Electronic efector 300 SI5004 Manual de usuario

IFM Electronic

IFM Electronic efector 500 PB5 Series Manual de usuario

IFM Electronic

IFM Electronic efector500 PI20 Manual de usuario

IFM Electronic

IFM Electronic Efector 200 Manual de usuario

IFM Electronic

IFM Electronic Efector 300 SA1000 Manual de usuario

IFM Electronic

IFM Electronic efector 300 SU7000 Manual de usuario

Manuales populares de Accesorios de otras marcas

Hillco

Hillco 2810 Manual de usuario

Siemens

Siemens QSA2700D Manual del operador

Contours

Contours ZY024 Manual de usuario

Saivod

Saivod VS621 Manual de usuario

Virtuox

Virtuox VirtuCLEAN 2.0 Manual de usuario

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manual de usuario

Z-Wave

Z-Wave HSD-200Z Manual de usuario

turck

turck FMX-IM-2UPLI63FX Manual de usuario

Decagon Devices

Decagon Devices 10HS Manual de usuario

UPPAbaby

UPPAbaby Cup Holder Manual de usuario

Elko

Elko SmartSensor Leakage Wireless Manual de usuario

Grizzly

Grizzly H8371 Manual de usuario

Panasonic

Panasonic HG-T Series Manual de usuario

DigiDesign

DigiDesign 888/24 I/O Manual de usuario

PROZIS

PROZIS QUAY Manual de usuario

patagonia

patagonia PSI Vest Manual de usuario

SFC Energy

SFC Energy EFOY GO! Manual de usuario

Axminster

Axminster Tooling Stylus Tip Ballpoint Pen Kit Manual de usuario

IFM Electronic efector 200 OPU200 Manual de usuario

Manuales populares de Accesorios de otras marcas