IDataLink Maestro RR Manual de usuario

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here in

are the properties of their respective owners.

WARNING

Pressing the printer icon or “quick printing” this document will print

all of the guides in this compilation.

Open the Bookmarks menu and find your vehicle OR scroll

down until you find the install guide for your vehicle.

Print only the pages for your vehicle using the advanced

options in the Print menu.

Install your Maestro RR according to the guide for your vehicle.

HOW TO USE THIS INSTALL GUIDE

SELECT VEHICLE

PRINT PAGES NEEDED

ELECTRONICS

Click here for:

Radar Installation Guides

2014-2019

ToyoTa 4 RunneR

WiTh JBL

INSTALL GUIDE

RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here

in are the properties of their respective owners.

PRODUCTS REQUIRED

iDatalink Maestro RR or RR2 Radio Replacement Interface

iDatalink Maestro HRN-RR-TO2 Installation Harness

PROGRAMMED FIRMWARE

ADS-RR(SR)-TOY02-DS

ADDITIONAL RESOURCES

Maestro RR2 Programmable Outputs Guide

OPTIONAL ACCESSORIES

ADS-RR(SR)-TOY02-DS-IG-EN maestro.idatalink.com

ToyoTa 4 RunneR WiTh JBL 2014-2019

WELCOME

NEED HELP?

Congratulations on the purchase

of your iDatalink Maestro RR Radio

replacement solution. You are

now a few simple steps away from

enjoying your new car radio with

enhanced features.

Before starting your installation,

please ensure that your iDatalink

Maestro module is programmed

with the correct ﬁrmware for your

vehicle and that you carefully review

the install guide.

Please note that Maestro RR will

only retain functionalities that

were originally available in the

vehicle.

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Radio Wire Reference Chart 5

Troubleshooting Table 6

1 866 427-2999

maestro.idatalink.com/support

www.12voltdata.com/forum

[email protected]

ADS-RR(SR)-TOY02-DS-IG-EN maestro.idatalink.com

ToyoTa 4 RunneR WiTh JBL 2014-2019

INSTALLATION INSTRUCTIONS

STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from

aftermarket radio main harness to the TO2 T-harness and

match the wire functions.

• Remove the factory radio.

For vehicles with bird’s eye view: to retain this system, con-

nect Yellow/Green wire from TO2 T-Harness to the radio’s

Purple/White wire.

STEP 2

• If the vehicle is equipped with an OEM backup camera,

connect the TO2 T-harness to the backup camera harness.

STEP 3

• Connect the factory harness to the TO2 T-harness.

STEP 4

• Plug the male WHITE 2 pin connector of your TO2

T-harness into the OBDII harness.

• Plug the OBDII connector into the OBDII of the vehicle.

STEP 5

• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Connect the backup camera RCA cable into the

aftermarket radio (if equipped).

• Connect the auxiliary RCA cables into the aftermarket radio

(if equipped).

• Plug the Data cable to the data port of the aftermarket

radio.

Notes

On Pioneer radio, ensure that there is nothing plugged into

the W/R port.

For Sony radios with OSD Controllable camera: When the

vehicle is equipped with the bird’s eye view camera system,

plug the camera into Camera 1 on the radio. This is the

only camera input that allows camera control through the

touchscreen.

STEP 6

• Connect all the harnesses to the Maestro RR module then

test your installation.

ADS-RR(SR)-TOY02-DS-IG-EN maestro.idatalink.com

ToyoTa 4 RunneR WiTh JBL 2014-2019

AUX INAUX IN

BACKUP CAMBACKUP CAM

MAIN

HARNESS

RCA CABLES

FACTORY RADIO HARNESS

REVERSE CAMERA HARNESS

TO2 T-HARNESS

STEP 2

STEP 3

STEP 5

WIRES FROM

VEHICLE

CONNECT YELLOW RCA AUX IN

IF VEHICLE IS EQUIPPED WITH

AUXILIARY VIDEO

CONNECT IF EQUIPPED

CONNECT TO

AFTERMARKET RADIO

STEP 6

DATA

CABLE

OBDII CONNECTOR

STEP 4

WIRING DIAGRAM with an Amplifier

YELLOW - 12V (+)

BLACK - GROUND

RED - ACCESSORY (+)

YELLOW/BLACK - FOOT BRAKE

ORANGE - ILLUMINATION (+)

PURPLE/WHITE - REVERSE LIGHT (+)

PINK - VEHICLE SPEED

LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

STEP 1

WHITE

WHITE/BLACK

GRAY

GRAY/BLACK

LF RCA INPUT

RF RCA INPUT

SEE AFTERMARKET

RADIO GUIDE

FOR RADIO WIRE

COLORS

GREEN - LR SPEAKER (+)

GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

PURPLE - RR SPEAKER (+)

CONNECTIONS

NOT

REQUIRED

WITH AMP

YELLOW/GREEN (NOT CONNECTED)

NOT REQUIRED

STEERING WHEEL

CONTROL CABLE

MAESTRO RR MODULE

PIONEER RADIO: ENSURE

THAT NOTHING IS PLUGGED

IN W/R PORT.

ADS-RR(SR)-TOY02-DS-IG-EN maestro.idatalink.com

ToyoTa 4 RunneR WiTh JBL 2014-2019

RADIO WIRE REFERENCE CHART

Wire

Description Polarity Wire Color on Maestro

T-Harness

Wire Color on Alpine

cable

Wire Color on Kenwood

cable

Wire Color on Pioneer

cable

Wire Color on Sony

cable

Illumination (+) Orange N/A Orange/White Orange/White Orange

Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White

E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green

Foot Brake (+) Yellow/Black Yellow/Black N⁄A N⁄A N/A

VSS (vehicle speed sensor) (DATA) Pink Green/White Pink Pink N/A

ADS-RR(SR)-TOY02-DS-IG-EN maestro.idatalink.com

ToyoTa 4 RunneR WiTh JBL 2014-2019

TROUBLESHOOTING TABLE

PROBLEM SOLUTION

Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the

vehicle.

If you hardwired connections at the OBDII, check connections at the OBDII

connector. Make sure the RED/BROWN wire is on PIN 6 and the YELLOW/

BROWN wire is connected to PIN 14 of the OBDII connector. Do not use

T-Taps. Soldering or military splicing methods are recommended.

Reset the RR.

The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and

that it is plugged into the black port on the Maestro RR. The red and blue

ports on the RR should be empty.

Make sure the correct radio model and serial number were entered during

the ﬂash. Verify the radio’s serial number entered during the ﬂash matches

what is listed on the radio screen. This can be found in the settings of the

radio, listed as Device Id, Device Number, or Serial Number.

The light on the Maestro is ﬂashing RED ONCE. There is no ﬁrmware on the module; ﬂash the RR module.

MAESTRO RR RESET PROCEDURE:

Turn the key to the OFF position, then disconnect all connectors from the module.

Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may

take up to 10 seconds).

Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.

TECHNICAL ASSISTANCE

Phone: 1-866-427-2999

Email: maestr[email protected]

Web: maestro.idatalink.com/support add www.12voltdata.com/forum/

IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest ﬁrmware from the manufacturer. Please visit the radio

manufacturer’s website and look for any updates pertaining to your radio.

ELECTRONICS

Click here for:

Radar Installation Guides

2014-2019

ToyoTa 4 RunneR

WiThouT JBL

INSTALL GUIDE

RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here

in are the properties of their respective owners.

PRODUCTS REQUIRED

iDatalink Maestro RR or RR2 Radio Replacement Interface

iDatalink Maestro HRN-RR-TO2 Installation Harness

PROGRAMMED FIRMWARE

ADS-RR(SR)-TOY02-DS

ADDITIONAL RESOURCES

Maestro RR2 Programmable Outputs Guide

OPTIONAL ACCESSORIES

ADS-RR(SR)-TOY02-DS-IG-EN maestro.idatalink.com

ToyoTa 4 RunneR WiThouT JBL 2014-2019

WELCOME

NEED HELP?

Congratulations on the purchase

of your iDatalink Maestro RR Radio

replacement solution. You are

now a few simple steps away from

enjoying your new car radio with

enhanced features.

Before starting your installation,

please ensure that your iDatalink

Maestro module is programmed

with the correct ﬁrmware for your

vehicle and that you carefully review

the install guide.

Please note that Maestro RR will

only retain functionalities that

were originally available in the

vehicle.

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Radio Wire Reference Chart 5

Troubleshooting Table 6

1 866 427-2999

maestro.idatalink.com/support

www.12voltdata.com/forum

[email protected]

ADS-RR(SR)-TOY02-DS-IG-EN maestro.idatalink.com

ToyoTa 4 RunneR WiThouT JBL 2014-2019

INSTALLATION INSTRUCTIONS

STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Cut and remove the front speaker wire junction connectors.

• Connect the wires shown on the next page from

aftermarket radio main harness to the TO2 T-harness and

match the wire functions.

• Remove the factory radio.

For vehicles with bird’s eye view: to retain this system, con-

nect Yellow/Green wire from TO2 T-Harness to the radio’s

Purple/White wire.

STEP 2

• If the vehicle is equipped with an OEM backup camera,

connect the TO2 T-harness to the backup camera harness.

STEP 3

• Connect the factory harness to the TO2 T-harness.

STEP 4

• Plug the male WHITE 2 pin connector of your TO2

T-harness into the OBDII harness.

• Plug the OBDII connector into the OBDII of the vehicle.

STEP 5

• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Connect the backup camera RCA cable into the

aftermarket radio (if equipped).

• Connect the auxiliary RCA cables into the aftermarket radio

(if equipped).

• Plug the Data cable to the data port of the aftermarket

radio.

Notes

On Pioneer radio, ensure that there is nothing plugged into

the W/R port.

For Sony radios with OSD Controllable camera: When the

vehicle is equipped with the bird’s eye view camera system,

plug the camera into Camera 1 on the radio. This is the

only camera input that allows camera control through the

touchscreen.

STEP 6

• Connect all the harnesses to the Maestro RR module then

test your installation.

Otros manuales para Maestro RR

Otros manuales de Accesorios para automóviles de iDataLink

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink ADS-TBSL-C1 Manual de usuario

iDataLink

iDataLink BLADE-AL(TB)-TL2 Manual de usuario

iDataLink

iDataLink Maestro K150 Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink Maestro AR Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink ADS-ALCA Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink maestro mus1 Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink ADS-ALCA Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink BLADE Series Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario