IDataLink Maestro Rr Manual de usuario

OPTIONAL ACCESSORIES

PROGRAMMED FIRMWARE

ADS-RR(SR)-TOY01-DS

PRODUCTS REQUIRED

•iDatalink Maestro RR Radio Replacement Interface

•TO1 Installation Harness

TO1 & JVC RADIO

OWNER'S GUIDE

RETAINS STEERING WHEEL CONTROLS,

FACTORY SETTINGS AND MORE!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here

in are the properties of their respective owners.

JVCRRSRTOY01DSOGEN

TABLE OF CONTENTS

WELCOME

NEED HELP?

Congratulations on the purchase

of your iDatalink Maestro RR Radio

replacement solution. You are

now a few simple steps away from

enjoying your new car radio with

enhanced features.

This guide is a great addition to both

the vehicle owner’s guide and the

aftermarket radio owner’s guide.

We recommand having both these

documents handy as they cover all

the functionality that the Maestro

RR retains.

Please note that all the retained

functionalities must be initially

available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/support

www.12voltdata.com/forum

USING YOUR STEERING WHEEL CONTROLS

SEE YOUR QUICK REFERENCE CARD 3

USING YOUR FACTORY SYSTEMS

OEM SATELLITE RADIO 4

OEM USB 4

USING MAESTRO FEATURE

VEHICLE INFO 5

Access and Display Vehicle Info Screen 5

Access and Change Vehicle Info Settings 5

•Set Tire Location 5

•Check Engine Alert 5

•Door Alert 6

•TPMS Alert 6

GAUGES 7

Access and Display Gauges Screen 7

Access and Change Gauges Settings 7

•Select Gauges 7

•Center Gauge Warning Text 7

•Fuel Economy 7

•Validate PIDs 8

•About Gauges 8

•OBD2 Communication 8

PARKING ASSIST 9

Access and Display Parking Assist Screen 9

Access and Change Parking Assist Settings 9

CHANGING OTHER SETTINGS

VEHICLE FACTORY SETTINGS 10

Access and Change Vehicle Factory Settings 10

•Vehicle Ampliﬁer 10

MAESTRO FEATURES SETTINGS 10

Access and Change Maestro Settings 10

•Module Audio Gain 10

•Module Master Reset 10

•Accessory During Crank 10

JVCRRSRTOY01DSOGEN

USIING YOUR STEERING WHEEL CONTROLS

USING YOUR

STEERING WHEEL

CONTROLS

(If equipped)

Your steering wheel buttons can be used to control your aftermarket JVC radio. You can

assign steering wheel buttons to JVC radio functions. Simply program your Maestro RR

module online using the Weblink updater and customize your buttons. Each steering

wheel button can control up to two radio features.

SEE YOUR QUICK REFERENCE CARD

A quick reference card showing your steering wheel conﬁguration can be printed on the

Maestro website during the ﬂashing process. If you had your product installed professionally,

ask your installer to print this card for you during installation.

JVCRRSRTOY01DSOGEN

USING YOUR FACTORY SYSTEMS

USING YOUR

FACTORY

SYSTEMS

The following section explains how to access and operate the factory systems that have

been retained. Your vehicle must already be equipped with these systems.

OEM SATELLITE RADIO

Press on Satellite Radio to listen to the factory satellite radio tuner. This allows you to use the

tuner that’s already in your vehicle, rather than installing an aftermarket tuner. Your vehicle

must be equipped with a tuner for it be retained by the Maestro RR module.

Satellite Radio must be selected during the Maestro RR online programming with the Weblink

Updater. A subscription is required to receive satellite radio services. If your tuner needs to be

activated, tune to channel 0 to see your radio ESN which is required for an activation.

OEM USB

Press on USB/iPod to access the factory USB. Your vehicle must be equipped with a USB port

for it to be retained by the Maestro RR module.

HOW TO GET THERE:

JVCRRSRTOY01DSOGEN

USING MAESTRO FEATURES - VEHICLE INFO

USING MAESTRO

FEATURES 

VEHICLE INFO

HOW TO GET THERE:

VEHICLE INFO

Access And Display Vehicle Info Screen

In the My Vehicle submenu, press on Vehicle

Info to display information about the vehicle

such as tire pressure, battery voltage and open

entry points. If your vehicle is equipped

with a compatible tire pressure monitoring

system (TPMS), the digital tire pressures will

be displayed for each tire. Should your check

engine light come on, the CHECK ENGINE

button will become active and you will be able to press this button to see the active trouble

codes and attempt to reset them.

Access And Change Vehicle Info Settings

Access the Maestro settings to conﬁgure the alerts that can be generated. These alerts will

cause the Vehicle Info screen to come up when certain conditions occur.

•Set Tire Location

Toyota vehicles do not have a pre-assigned designation for the location of each tire on the

vehicle. As an example, the tire pressure for the front left tire may display in the right rear

position. To correct this, the Maestro module allows you to set the tire location in the vehicle

info settings menu. Select the “Set Tire Location” menu option, then follow the on-screen

instructions. For this procedure, you will be required to deﬂ ate each tire slightly.

NOTES: The tire pressures rely on proper programming by the technician when tires are changed or rotated. If your tires have been rotated but

not reprogrammed, the tire locations on this screen may be incorrect.

•Check Engine Alert

Enables the Vehicle Info screen to be displayed automatically when the check engine light

turns on in the vehicle. The diagnostic codes can be read and cleared.

Warning: If the check engine light turns on after clearing the trouble code, it may indicate serious problems with the engine. Have the vehicle

serviced by a qualified technician.

JVCRRSRTOY01DSOGEN

USING MAESTRO FEATURES - VEHICLE INFO

USING MAESTRO

FEATURES 

VEHICLE INFO

•Door Alert

Enables the Vehicle Info screen to be displayed automatically if a door is opened or left open

when the vehicle speed exceeds 5 mph or 8 km/h.

•TPMS Alert

Enables the Vehicle Info screen to be displayed automatically when a TPMS fault is detected

(only if TPMS is available in the vehicle and supported by Maestro).

JVCRRSRTOY01DSOGEN

USING MAESTRO FEATURES - GAUGES

USING MAESTRO

FEATURES 

GAUGES

HOW TO GET THERE:

GAUGES

Access And Display Gauges Screen

In the Vehicle Car submenu, press on Gauges

to view the gauges that are selected. During

the installation, the default gauge choices will

be displayed. When the Maestro RR module is

installed, the vehicle is queried and the gauges

that can be supported are enabled.

Access And Change Gauges Settings

•Select Gauges

When choosing a new gauge from the list, the supported gauges will be displayed in white

text and the non-supported gauges will be displayed in gray text. If a gauge is displayed in

gray text with a number next to it, the gauge is supported and is already assigned to another

gauge on the screen. Some gauges have options that can be set. You will see these appear

when you select a gauge that has options. In order to use some of the fuel economy gauges,

you will need to enter your fuel tank capacity. This information can usually be found in your

vehicle owner’s guide.

•Center Gauge Warning Text

Allows the choice of displaying text when the center gauge reaches its peak.

•Fuel Economy

For accurate fuel economy information, the fuel tank capacity must be entered in this

section of the settings menu.

JVCRRSRTOY01DSOGEN

USING MAESTRO FEATURES - GAUGES

USING MAESTRO

FEATURES 

GAUGES

•Validate PIDs (Parameter Identiﬁers)

Accesses the factory system to determine which gauges can be supported. This is done

automatically when the module powers up. It is only required to be done manually if the

module has been re-ﬂashed.

•About Gauges

This screen will display a pop-up with information about the gauges.

•OBD2 Communication

Auto Disable (default)

The module will communicate with the vehicle’s OBD2 system unless it detects another

device. This may be a scan tool or aftermarket programmer connected to the vehicle.

Always Enabled

The module will communicate with the vehicle’s OBD2 system even when a scan tool

or aftermarket programmer is connected. However, some scan tools and aftermarket

programmers will not function when this option is enabled.

Disabled

The module will not communicate with the vehicle’s OBD2 system. This option applies when

using a scan tool or aftermarket programmer that does not allow multiple connections at

the same time.

Enabled on Demand

The module will only communicate with the vehicle’s OBD2 system when the vehicle info

or gauges screen is displayed. This is used in vehicles that issue a periodic vehicle health

report through a factory system such as Sync or OnStar. However, applying this setting may

cause the fuel economy calculations to be inaccurate.

JVCRRSRTOY01DSOGEN

USING MAESTRO FEATURES - PARKING ASSIST

USING MAESTRO

FEATURES 

PARKING

ASSIST

HOW TO GET THERE:

PARKING ASSIST

Access And Display Vehicle Info Screen

In the My Vehicle submenu, press on Parking

Assist to see the visual parking assist screen.

This option will only be available if the Maestro

detects that your vehicle is equipped a

compatible factory parking sensor system.

Access And Change Parking Assist Settings

When parking assist interrupt is set to ON, the

Maestro parking assist screen will pop up when

the vehicle is in reverse. If the vehicle is also

equipped with a backup camera, there is also a

reverse interrupt setting for it in the radio. Only

one feature’s reverse interrupt should be set to

ON, or there will be a conﬂict in the radio.

You can change the units of length from feet to meters.

JVCRRSRTOY01DSOGEN

CHANGING OTHER SETTINGS

CHANGING

OTHER

SETTINGS

HOW TO GET THERE:

VEHICLE FACTORY SETTINGS

Access And Change Vehicle factory Settings

There are several programmable options

that affect the way that the Maestro interface

works with your vehicle. These settings enable

you to customize the features of your vehicle.

Not all settings are described here, as they are

vehicle speciﬁc.

• Vehicle Ampliﬁer

To adjust the settings of your factory ampliﬁer, press on Vehicle Ampliﬁer. This setting will

only appear if your Maestro RR module detects a compatible ampliﬁer in your vehicle. This

feature must be retained during the Maestro RR online programming with the Weblink

Updater.

The Gain setting will change the gain of the factory ampliﬁer. The Ampliﬁer Retention setting

is used to tell the Maestro module if you are using (retaining) the factory ampliﬁer or if you

have bypassed it.

MAESTRO FEATURES SETTINGS

Access And Change Maestro Features

• Module Audio Gain

Used to adjust the audio gain of the Maestro

module. All audio that passes from the factory

systems into the Maestro will be affected by

this setting.

•Module Master Reset

Used to reset the Maestro module.

•Accessory During Crank

If this setting is turned on, the radio will stay

powered while the engine is started. If this

setting is turned off, the accessory circuit

will drop out while the engine cranks, like a

normal accessory circuit.

Otros manuales para maestro Rr

Tabla de contenidos

Otros manuales de Accesorios para automóviles de iDataLink

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink maestro SW Manual de usuario

iDataLink

iDataLink Maestro K150 Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink ADS-ALCA Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink BLADE Series Manual de usuario

iDataLink

iDataLink maestro Pr 2 Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink Maestro HRR-HO1 Manual de usuario

iDataLink

iDataLink ADS-TBSL-FM-EN Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink Maestro AR Manual de usuario

iDataLink

iDataLink LADE-AL-TL2-EN Manual de usuario

iDataLink

iDataLink BLADE-AL-HK4-EN Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink maestro mus1 Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario