IDataLink Maestro Rr Manual de usuario

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here in

are the properties of their respective owners.

WARNING

Pressing the printer icon or “quick printing” this document will print

all of the guides in this compilation.

Open the Bookmarks menu and find your vehicle OR scroll

down until you find the install guide for your vehicle.

Print only the pages for your vehicle using the advanced

options in the Print menu.

Install your Maestro RR according to the guide for your vehicle.

HOW TO USE THIS INSTALL GUIDE

SELECT VEHICLE

PRINT PAGES NEEDED

OPTIONAL ACCESSORIES

PROGRAMMED FIRMWARE

ADS-RR(SR)-TOY01-DS

PRODUCTS REQUIRED

iDatalink Maestro RR Radio Replacement Interface

iDatalink Maestro TO1 Installation Harness

INSTALL GUIDE

SCION FRS

20132016

Retains factoRy amplifieR, steeRing wheel contRols, and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here

in are the properties of their respective owners.

ADS-RR(SR)-TOY01-DS maestro.idatalink.com

scion fR-s 2013-2016

WELCOME

NEED HELP?

Congratulations on the purchase

of your iDatalink Maestro RR Radio

replacement solution. You are

now a few simple steps away from

enjoying your new car radio with

enhanced features.

Before starting your installation,

please ensure that your iDatalink

Maestro module is programmed

with the correct ﬁrmware for your

vehicle and that you carefully review

the install guide.

Please note that Maestro RR will

only retain functionalities that

were originally available in the

vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/support

www.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Radio Wire Reference Chart 5

Vehicle Wire Reference Chart 6

ADS-RR(SR)-TOY01-DS maestro.idatalink.com

scion fR-s 2013-2016

INSTALLATION INSTRUCTIONS

STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from

aftermarket radio main harness to the TO1 T-harness and

match the wire functions.

• Remove the factory radio.

STEP 2

• If the vehicle is equipped with an OEM backup camera,

connect the TO1 T-harness to the backup camera harness

(see wire chart for details).

STEP 3

• Identify if your vehicle has a 20 or 28 pin secondary

connector. Assemble TO1 T-harness as shown on

wiring diagram. Connect the factory harness to the TO1

T-harness.

STEP 4

• Plug the OBDII connector into the OBDII of the vehicle,

under driver dash.

STEP 5

• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Connect the backup camera RCA cable into the

aftermarket radio (if equipped).

• Connect the auxiliary RCA cables into the aftermarket radio

(if equipped).

• Plug the Data cable to the data port of the aftermarket

radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack

of the aftermarket radio.

NOTE:

In Pioneer radios: plug Audio cable in auxiliary input of

the radio.

STEP 6

• Connect all the harnesses to the Maestro RR module then

test your installation.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key

to the OFF position then disconnect all connectors from

the module. Press and hold the module’s programming

button and connect all the connectors back to the module.

Wait, the module’s LED will ﬂash RED rapidly (this may

take up to 10 seconds). Release the programming button.

Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail

“[email protected]”. Visit us at “maestro.idatalink.

com/support” and “www.12voltdata.com/forum/”

ADS-RR(SR)-TOY01-DS maestro.idatalink.com

scion fR-s 2013-2016

AUX INAUX IN

BACKUP CAMBACKUP CAM

FACTORY RADIO HARNESS

STEP 3

REVERSE CAMERA HARNESS

STEP 2

CONNECT IF EQUIPPED

MAIN

HARNESS

RCA CABLES

TO1 T-HARNESS

STEP 5

WIRES FROM

VEHICLE

CONNECT TO

AFTERMARKET RADIO

STEP 6

MAESTRO RR MODULE

DATA

CABLE

OBDII CONNECTOR

STEP 4

WIRING DIAGRAM without an Amplifier

YELLOW - 12V (+)

BLACK - GROUND

RED - ACCESSORY (+)

YELLOW/BLACK - FOOT BRAKE

ORANGE - ILLUMINATION (+)

PURPLE/WHITE - REVERSE LIGHT (+)

PINK - VEHICLE SPEED

LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

STEP 1

SEE AFTERMARKET

RADIO GUIDE

FOR RADIO WIRE

COLORS

SEE WIRE

CHART

GREEN - LR SPEAKER (+)

GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

PURPLE - RR SPEAKER (+)

WHITE - LF SPEAKER (+)

WHITE/BLACK - LF SPEAKER (-)

GRAY - RF SPEAKER (+)

GRAY/BLACK - RF SPEAKER (-)

AUDIO

CABLE

YELLOW - VIDEO (+)

BROWN - VIDEO (-)

BLUE/YELLOW - CAM. POWER (+)

BLACK - GROUND (-)

CONNECT 20 OR 28 PIN CABLE

ADS-RR(SR)-TOY01-DS maestro.idatalink.com

scion fR-s 2013-2016

RADIO WIRE REFERENCE CHART

Wire

Description Polarity Wire Color on Maestro

T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable

Illumination (+) Orange N/A Orange/White Orange/White

Reverse Light (+) Purple/White Orange/White Purple/White Purple/White

E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green

Foot Brake (+) Yellow/Black Yellow/Black N/A N/A

VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

ADS-RR(SR)-TOY01-DS maestro.idatalink.com

scion fR-s 2013-2016

VEHICLE WIRE REFERENCE CHART

REVERSE CAMERA NOT AVAILABLE / NOT PRESENT

OPTIONAL ACCESSORIES

PROGRAMMED FIRMWARE

ADS-RR(SR)-TOY01-DS

PRODUCTS REQUIRED

iDatalink Maestro RR Radio Replacement Interface

iDatalink Maestro TO1 Installation Harness

INSTALL GUIDE

SCION IM

2016

Retains factoRy amplifieR, steeRing wheel contRols, and moRe!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here

in are the properties of their respective owners.

ADS-RR(SR)-TOY01-DS maestro.idatalink.com

scion im 2016

WELCOME

NEED HELP?

Congratulations on the purchase

of your iDatalink Maestro RR Radio

replacement solution. You are

now a few simple steps away from

enjoying your new car radio with

enhanced features.

Before starting your installation,

please ensure that your iDatalink

Maestro module is programmed

with the correct ﬁrmware for your

vehicle and that you carefully review

the install guide.

Please note that Maestro RR will

only retain functionalities that

were originally available in the

vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/support

www.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Radio Wire Reference Chart 5

Vehicle Wire Reference Chart 6

ADS-RR(SR)-TOY01-DS maestro.idatalink.com

scion im 2016

INSTALLATION INSTRUCTIONS

STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from

aftermarket radio main harness to the TO1 T-harness and

match the wire functions.

• Remove the factory radio.

STEP 2

• If the vehicle is equipped with an OEM backup camera,

connect the TO1 T-harness to the backup camera harness

(see wire chart for details).

STEP 3

• Identify if your vehicle has a 20 or 28 pin secondary

connector. Assemble TO1 T-harness as shown on

wiring diagram. Connect the factory harness to the TO1

T-harness.

STEP 4

• Plug the OBDII connector into the OBDII of the vehicle,

under driver dash.

STEP 5

• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Connect the backup camera RCA cable into the

aftermarket radio (if equipped).

• Connect the auxiliary RCA cables into the aftermarket radio

(if equipped).

• Plug the Data cable to the data port of the aftermarket

radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack

of the aftermarket radio.

NOTE:

In Pioneer radios: plug Audio cable in auxiliary input of

the radio.

STEP 6

• Connect all the harnesses to the Maestro RR module then

test your installation.

TROUBLESHOOTING TIPS:

• To reset the module back its factory settings, turn the key

to the OFF position then disconnect all connectors from

the module. Press and hold the module’s programming

button and connect all the connectors back to the module.

Wait, the module’s LED will ﬂash RED rapidly (this may

take up to 10 seconds). Release the programming button.

Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail

“[email protected]”. Visit us at “maestro.idatalink.

com/support” and “www.12voltdata.com/forum/”

Otros manuales para maestro Rr

Tabla de contenidos

Otros manuales de Accesorios para automóviles de iDataLink

iDataLink

iDataLink LADE-AL-TL2-EN Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink BLADE-AL-HK4-EN Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink Maestro HRR-HO1 Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink ADS-AL-CH4 Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink maestro mus1 Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink Maestro RR Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

iDataLink

iDataLink maestro Rr Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario