ICRealtime ICIP2040IR Manual de usuario

IR Intelligent Speed Dome Installation Manual

Version 1.0.0

Table of Contents

1INTELLIGENT SPEED DOME INSTALLATION PREPARATION .......................1

1.1 Basic Requirement ................................................................................................................................1

1.2 Check installation space and installation location intension ...........................................................1

1.3 Please keep all package material well for future use.......................................................................1

2SETUP BEFORE INSTALLATION......................................................................2

2.1 Check Accessories................................................................................................................................2

2.2 Open Device...........................................................................................................................................2

2.3 About Ceiling Installation Position Map..............................................................................................2

2.4 Dial Switch Setting (Analog Speed Dome, HDCVI Intelligent Speed Dome) ...............................3

2.5 TF Card Slot and Reset Button ...........................................................................................................4

3CEILING INSTALLATION ...................................................................................5

3.1 Installation Components .......................................................................................................................5

3.2 Ceiling Installation Steps ......................................................................................................................5

3.2.1 Installation Requirements................................................................................................................5

3.2.2 Installation Steps...............................................................................................................................5

4WALL MOUNT BRACKET INSTALLATION........................................................7

4.1 Component Installation .........................................................................................................................7

4.2 Installation...............................................................................................................................................7

4.2.1 Installation Requirements................................................................................................................7

4.2.2 Installation Steps...............................................................................................................................7

5APPENDIX ⅠLIGHTENING PROTECTION AND SURGE PROTECTION ........11

6APPENDIX Ⅱ24V AC WIRE GAUGE AND TRANSMISSION DISTANCE

RELATIONSHIP SHEET ..........................................................................................12

7APPENDIX Ⅲ12V DC WIRE GAUGE AND TRANSMISSION DISTANCE

RELATIONSHIP SHEET ..........................................................................................13

8APPENDIX ⅣWIRE GAUGE REFERENCE SHEET .......................................14

iii

Welcome

Thank you for purchasing our speed dome!

Please read the following safeguards and warnings carefully before you install or use the

product!

Important Safeguards and Warnings

Safety Measures

1. Qualified Engineer Needed

The installation engineer or maintenance engineer shall have corresponding CCTV system

installation certificate or maintenance qualification certificate.

The installation engineer or maintenance engineer shall have qualification certificate for work

at height.

The installation engineer or maintenance engineer shall have the basic knowledge and

operation technique for low-voltage cable layout and low-voltage electronic cable connection.

Please read the installation manual carefully and keep it well for future reference,

We are not liable for any problems caused by unauthorized modifications or attempted repair.

2. Lifting Appliance Requirement

Please select the proper speed dome installation mode and use the lifting appliances at the

safety environment.

The lifting appliances shall have the enough capacity to reach the installation height.

The lifting appliances shall have safe performance.

The precaution measures include two types: Warning and Note.

Warning: It is to alert you there is an optional risk of death or series injury!

Note: It is to alert you there is an optional risk of damage or property loss!

Warning

1. All installation and operation here should conform to your local electrical safety codes. We

assume no liability or responsibility for all the fires or electrical shock caused by improper

handling or installation.

2. Be sure to use all the accessories (such as power adapter) recommended by manufacturer.

3. Do not connect several speed domes to one power adapter. It may result in overheat or fire

if it exceeds the rated load.

4. Before you connect the cable, install or uninstall, or begin the daily maintenance work,

please turn off the power and unplug the power cable.

5. Please make sure the produce is secure firmly on the wall or the ceiling.

6. Please turn off the power and unplug the power cable, If there is any smoke, disgusting

smell, or noise. Please contact your local retailer or customer service centre for help.

7. All the examination and repair work should be done by the qualified service engineers. We

are not liable for any problems caused by unauthorized modifications or attempted repair.

Note

1. Safety Transportation

Heavy stress, violent vibration or water splash are not allowed during transportation, storage

and installation.

This series product must use split type package during the transportation.

We are not liable for any damage or problem resulting from the integrated package during

the transportation.

2. When device is malfunction

Shut down the device and disconnect the power cable immediately if there is smoke, abnormal

smell or abnormal function. Please contact your local retailer ASAP.

3. Do not try to dismantle or modify the device

There is risk of personal injury or device damage resulting from opening the shell.

Please contact your local retailer if there is internal setup or maintenance requirement.

We are not liable for any problems caused by unauthorized modifications or attempted repair.

4. Do not allow other object falling into the device

Please make sure there is no metal or inflammable, explosive substance in the speed dome.

The above mentioned objects in the device may result in fire, short-circuit or damage.

Please shut down the device and disconnect the power cable if there is water or liquid falling

into the camera. Please contact your local retailer ASAP.

Please pay attention to the camera. Avoid the sea water or rain to erode the camera.

5. Handle carefully

Do not allow this series product fall down to the ground.

Avoid heavy vibration.

6. Installation Environment Requirement

This series speed dome should be installed in a cool, dry place away from direct sunlight,

inflammable, explosive substances and etc.

This series product shall be away from the strong electromagnetism radiant, please keep it

away from wireless power, TV transmitter, transformer and etc.

7. Daily Maintenance

Please use the soft cloth to clean dust on the shell, or you can use soft cloth with cleaning

liquid to clean the shell and then use soft cloth to make it dry.

Do not use gasoline, dope thinner or other chemical material to clean the shell. It may result

in shell transfiguration or paint flake.

Do not allow the plastic or rubber material to touch the shell for a long time. It may result in

paint flake.

1INTELLIGENT SPEED DOME INSTALLATION

PREPARATION

1.1 Basic Requirement

All installation and operation here should conform to your local electrical safety codes.

Before installation, please open the package and check all the components are included.

Please make sure the speed dome installation environment and installation mode can meet

your requirement. If there is special requirement, please contact your local retailer for more

information.

We assume no liability or responsibility for all the fires or electrical shock caused by

improper handling or installation.

1.2 Check installation space and installation location intension

Please make sure the installation environment has enough space to install the speed dome and

its corresponding bracket.

Please make sure the ceiling, wall and the bracket can support the speed dome and its

corresponding installation component. It shall sustain the 8X weight of the speed dome.

1.3 Please keep all package material well for future use

Please keep speed dome package material well in case you need to send it back to your local

retailer or manufacturer for maintenance work.

Non-original package material may result in device damage during the transportation.

2SETUP BEFORE INSTALLATION

2.1 Check Accessories

Before the installation, please check the accessories one by one according to the packing list.

Please make sure all the components listed are included.

2.2 Open Device

Remove the package and then take out the device. See Figure 2-1.

Figure 2-1

2.3 About Ceiling Installation Position Map

The ceiling installation position map is to define hard ceiling holes position and cable exit position.

The beeline part is the mechanical blind spot. Please paste it according to your actual

requirement to avoid mechanical blind spot. See Figure 2-2.

Figure 2-2

2.4 Dial Switch Setting (Analog Speed Dome, HDCVI Intelligent Speed

Dome)

Open the cover of the pedestal, then you can see there are two dial switches on the PTZ which

are used to set terminal matched resistance. Please refer to Figure 2-3 and Figure 2-4 for more

information

Figure 2-3

Tabla de contenidos

Otros manuales de Cámara de seguridad de ICRealtime

ICRealtime

ICRealtime F Series Manual de usuario

ICRealtime

ICRealtime ICR540VD Manual de usuario

ICRealtime

ICRealtime Max Series Manual de usuario

ICRealtime

ICRealtime I-Sniper EL-750W Manual de usuario

ICRealtime

ICRealtime PTZ-N23X4-S Manual de usuario

ICRealtime

ICRealtime PTZN23X4D Manual de usuario

ICRealtime

ICRealtime ICR2200 Manual de usuario

ICRealtime

ICRealtime AVS-4MD5110-VIR Manual de usuario

ICRealtime

ICRealtime IPEL-B2012X-IRW1 Manual de usuario

ICRealtime

ICRealtime F Series Manual de usuario

ICRealtime

ICRealtime ICIPD3000 Manual de usuario

ICRealtime

ICRealtime AVS-4MB4016-IR Manual de usuario

ICRealtime

ICRealtime ClearView WiFi-2MP-BL100 Manual de usuario

ICRealtime

ICRealtime AVS-D2118VF Manual de usuario

ICRealtime

ICRealtime ICR650VD Manual de usuario

ICRealtime

ICRealtime ICR-220-IR Manual de usuario

ICRealtime

ICRealtime ICR540CCD Manual de usuario

ICRealtime

ICRealtime ICIP B3000AF Manual de usuario

ICRealtime

ICRealtime ICIP-D3077P Manual de usuario

ICRealtime

ICRealtime ICIP-P2300Y-IR Manual de usuario

ICRealtime

ICRealtime AVS-D8712SL-DP Manual de usuario

ICRealtime

ICRealtime AVS-4MB4012-IR Manual de usuario

ICRealtime

ICRealtime ICIP-3000CCD-W Manual de usuario

ICRealtime

ICRealtime F Series Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario