ICP DAS USA GRP-520 Guía de instalación

Otros manuales para GRP-520

1

Tabla de contenidos

Otros manuales de Puerta de ICP DAS USA

ICP DAS USA

ICP DAS USA HRT-711 Manual de usuario

ICP DAS USA

ICP DAS USA UA-5200 Series Manual de usuario

ICP DAS USA

ICP DAS USA HRT-710 Manual de usuario

ICP DAS USA

ICP DAS USA ECAN-240-FD Manual de usuario

ICP DAS USA

ICP DAS USA DNP-211 Manual de usuario

ICP DAS USA

ICP DAS USA SMS-531 Manual de usuario

ICP DAS USA

ICP DAS USA ICP CON RMV-762D-MTCP Manual de usuario

ICP DAS USA

ICP DAS USA I-7232D Manual de usuario

ICP DAS USA

ICP DAS USA ICP CON GW-7557 Manual de usuario

ICP DAS USA

ICP DAS USA DGW-521 Manual de usuario

ICP DAS USA

ICP DAS USA GW-7838-M Manual de usuario

ICP DAS USA

ICP DAS USA HRT-310 Manual de usuario

ICP DAS USA

ICP DAS USA I-7242D Manual de usuario

ICP DAS USA

ICP DAS USA GW-7238D Manual de usuario

ICP DAS USA

ICP DAS USA GW-2139M Manual de usuario

ICP DAS USA

ICP DAS USA GW-7552 Guía de configuración

ICP DAS USA

ICP DAS USA I-7232D Guía de configuración

ICP DAS USA

ICP DAS USA RMV-514 Manual de usuario

ICP DAS USA

ICP DAS USA GRP-540M Series Manual de usuario

ICP DAS USA

ICP DAS USA I-7231D Guía de configuración

ICP DAS USA

ICP DAS USA HRT-711 Manual de usuario

ICP DAS USA

ICP DAS USA GW-7472 Guía de instalación

ICP DAS USA

ICP DAS USA i-7241D Guía de configuración

ICP DAS USA

ICP DAS USA tGW-715 Manual de usuario

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario

GRP-520 FAQ Ver1.0

ICP DAS CO., LTD.

1

GRP-520

FAQ1-5

GRP-520 FAQ Ver1.0

ICP DAS CO., LTD.

2

Tables of Content

Q01: If we forget the IP of GRP-520, how to get the IP of GRP-520?................................3

Q02: How to control the remote M-7000 device (or other RS-232, RS-485 device) via

"Virtual COM" over 3G/GPRS?....................................................................................................6

Q03: How to share 3G network of GRP-520 to 3 XPac8000 (or other device)?............10

Q04: How to make Modbus/TCP to Modbus/RTU over 3G, and Card Reader Monitor

Application? ...................................................................................................................................13

Q05: How to connect FTP Server behind GRP-520?...........................................................18

GRP-520 FAQ Ver1.0

ICP DAS CO., LTD.

3

Q01: If we forget the IP of GRP-520, how to get the IP of GRP-520?

A01:

1. Please download putty. We will use it to connect with the device via RS-232 (COM1)

http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html

2. Execute putty, and set as below:

(1) select "Serial"

(2) input your com port number

(3) input "115200" for Speed

(4) and then click "Open" to open Com Port

GRP-520 FAQ Ver1.0

ICP DAS CO., LTD.

4

3. Power off your device, and turn the rotary switch to "1".

connect COM1 to your PC, and then power on your device

4. You will see console message like below

GRP-520 FAQ Ver1.0

ICP DAS CO., LTD.

5

5. Please input "ifconfig eth0" to get IP. (please make sure your ethernet wire connected)

GRP-520 FAQ Ver1.0

ICP DAS CO., LTD.

6

Q02: How to control the remote M-7000 device (or other RS-232, RS-485 device) via

"Virtual COM" over 3G/GPRS?

A02: The architecture shows as below, please follow the steps to setup GRP-520.

1. Please connect your device (DL-100 or M-7000) to serial port of GRP-520

2. If you never install VxServer, please refer the link as below:

http://m2m.icpdas.com/VxServer.html

VxServer must work with "VxComm" software. If you don't install "VxComm" software,

please refer the link below:

http://www.icpdas.com/products/Software/VxComm/vxcomm.htm

3. Please use web browser to link to GRP-520. Default IP is 192.168.255.1。

(default username / password is admin / admin)

Set Pin code of your SIM card, and Enable “Auto-Dialing”function.

Set “User Name”and “Password”if your SIM card needs it.

Press “Modify”

GRP-520 FAQ Ver1.0

ICP DAS CO., LTD.

7

4. Configure VxServer Function

(1) Set “Server IP”and “Server Port”, the default port number is “11000”.

(2) Let other settings be default value. (you can refer the user manual for the detail)

(3) Click “Enable Function”to enable VxServer function

(4) Press “Modify”, and GRP-520 will try to connect to server.

(5) if “Alive”field is not “True”(Green color), it mean VxServer function fail. Please

check your settings again.

5. Please reset your device and un-plug your Ethernet from GRP-520, it will dial-up in 60

seconds, and then it will connect to your control center.

GRP-520 FAQ Ver1.0

ICP DAS CO., LTD.

8

6. After GRP-520 connect to VxServer, please follow steps below:

(1) Press “Search Servers”button, you will get a device list

(2) Click right button of the mouse on GRP-520, and click “Add Server”.

(3) choose the virtual com port number, and click “OK”

(4) You will see virtual com port: COM11, COM12, but it can’t be opened now.

Click “tool”/”Restart Driver”to restart VxComm driver.

Open com port to connect your device.

(In this case, COM11 is RS-485, COM12 is RS-232 of GRP-520.)

GRP-520 FAQ Ver1.0

ICP DAS CO., LTD.

9

GRP-520 FAQ Ver1.0

ICP DAS CO., LTD.

10

Q03: How to share 3G network of GRP-520 to 3 XPac8000 (or other device)?

A03: The architecture shows as below, please follow the steps to setup GRP-520.

1. Please configure the Ethernet of XPac8000 as:

IP=192.168.0.10 ~ 12

Mask=”255.255.0.0”

gateway = “192.168.27.51”

2. Set the Ethernet IP of GRP-520.

3. Set Pin code of your SIM card, and Enable “Auto-Dialing”function.

Set “User Name”and “Password”if your SIM card need it.

Press “Modify”to save