IBASE Technology BISD3-QM77 Manual de usuario

BISD3-QM77

Intel®Gen. 2 CoreTM i3/i5 based

Mini ITX Motherboard

User’s Manual

Version 1.0

(Nov. 2016)

BISD3-QM77 User’s Manual

No part of this publication may be reproduced, copied, stored in a retrieval system,

translated into any language or transmitted in any form or by any means,

electronic, mechanical, photocopying, or otherwise, without the prior written

consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”).

Disclaimer

IBASE reserves the right to make changes and improvements to the products

described in this document without prior notice. Every effort has been made to

ensure the information in the document is correct; however, IBASE does not

guarantee this document is error-free.

IBASE assumes no liability for incidental or consequential damages arising from

misapplication or inability to use the product or the information contained herein,

nor for any infringements of rights of third parties, which may result from its use.

Trademarks

All the trademarks, registrations and brands mentioned herein are used for

identification purposes only and may be trademarks and/or registered trademarks

of their respective owners.

BISD3-QM77 User’s Manual

iii

Compliance

WEEE

This product must not be disposed of as normal household

waste, in accordance with the EU directive of for waste

electrical and electronic equipment (WEEE - 2012/19/EU).

Instead, it should be disposed of by returning it to a

municipal recycling collection point. Check local

regulations for disposal of electronic products.

Green IBASE

This product is compliant with the current RoHS

restrictions and prohibits use of the following substances

in concentrations exceeding 0.1% by weight (1000 ppm)

except for cadmium, limited to 0.01% by weight (100 ppm).

•Lead (Pb)

•Mercury (Hg)

•Cadmium (Cd)

•Hexavalent chromium (Cr6+)

•Polybrominated biphenyls (PBB)

•Polybrominated diphenyl ether (PBDE)

BISD3-QM77 User’s Manual

Important Safety Information

Carefully read the precautions before using the board.

Environmental conditions:

Use this product in environments with ambient temperatures between 0˚C

and 60˚C.

Do not leave this product in an environment where the storage temperature

may be below -20°C (-4°F) or above 80°C (176°F). To prevent from

damages, the product must be used in a controlled environment.

Care for your IBASE products:

Before cleaning the PCB, unplug all cables and remove the battery.

Clean the PCB with a circuit board cleaner or degreaser, or use cotton swabs

and alcohol.

Vacuum the dust with a computer vacuum cleaner to prevent the fan from

being clogged.

WARNING.

Attention during use:

Do not use this product near water.

Do not spill water or any other liquids on this product.

Do not place heavy objects on the top of this product.

Anti-static precautions

Wear an anti-static wrist strap to avoid electrostatic discharge.

Place the PCB on an anti-static kit or mat.

Hold the edges of PCB when handling.

Touch the edges of non-metallic components of the product instead of the

surface of the PCB.

Ground yourself by touching a grounded conductor or a grounded bit of metal

frequently to discharge any static.

CAUTION

Danger of explosion if the internal lithium-ion battery is replaced by an incorrect

type. Replace only with the same or equivalent type recommended by the

manufacturer. Dispose of used batteries according to the manufacturer’s

instructions or recycle them at a local recycling facility or battery collection point.

BISD3-QM77 User’s Manual

Warranty Policy

IBASE standard products:

24-month (2-year) warranty from the date of shipment. If the date of shipment

cannot be ascertained, the product serial numbers can be used to determine

the approximate shipping date.

3rd-party parts:

12-month (1-year) warranty from delivery for the 3rd-party parts that are not

manufactured by IBASE, such as CPU, CPU cooler, memory, storage

devices, power adapter, panel and touchscreen.

＊PRODUCTS, HOWEVER, THAT FAIL DUE TO MISUSE, ACCIDENT,

IMPROPER INSTALLATION OR UNAUTHORIZED REPAIR SHALL BE

TREATED AS OUT OF WARRANTY AND CUSTOMERS SHALL BE BILLED

FOR REPAIR AND SHIPPING CHARGES.

Technical Support & Services

1. Visit the IBASE website at www.ibase.com.tw to find the latest information

about the product.

2. If you need any further assistance from your distributor or sales

representative, prepare the following information of your product and

elaborate upon the problem.

Product model name

Product serial number

Detailed description of the problem

The error messages in text or in screenshots if there is any

The arrangement of the peripherals

Software in use (such as OS and application software, including the

version numbers)

3. If repair service is required, you can download the RMA form at

http://www.ibase.com.tw/english/Supports/RMAService/. Fill out the form and

contact your distributor or sales representative.

 
 
 
vi 
BISD3-QM77 User’s Manual 
 
Table of Contents 
Compliance.....................................................................................iii 
Important Safety Information........................................................iv 
Warranty Policy ...............................................................................v 
Technical Support & Services .......................................................v 
Chapter 1 General Information.............................................1 
1 Introduction .........................................................................................2 
2 Features..............................................................................................2 
3 Packing List.........................................................................................3 
4 Specifications......................................................................................4 
5 Block Diagram.....................................................................................6 
6 Overview.............................................................................................7 
7 Dimensions .........................................................................................9 
Chapter 2 HardwareConfiguration........................................10 
1 Essential Installations Before You Begin...........................................11 
1.1 Installing the Memory...........................................................11 
2 Setting the Jumpers ..........................................................................12 
2.1 How to Set Jumpers.............................................................12 
3 Jumper & Connector Locations .........................................................13 
4 Jumpers Quick Reference.................................................................14 
4.1 CMOS Data Clearance (J12)...............................................14 
4.2 ME Register Clearance (J15) ..............................................15 
4.3 AT / ATX Mode Selection (JP7)...........................................16 
4.4 COM1 RS-232/422/485 Power Selection (JP1)...................17 
4.5 COM2 RS-232/422/485 Power Selection (JP2)...................18 
4.6 Brightness Selection (JP3)..................................................19 
5 Connectors Quick Reference.............................................................20 
5.1 COM1 & COM2 RS-232/422/485 Port (CN1).......................21 
5.2 VGA & DVI-D Ports (CN2)...................................................22 
5.3 USB 3.0 Port (CN3, CN5, CN7)...........................................22 
5.4 HDMI Port (CN4).................................................................22 
5.5 LAN Port & USB 2.0 Ports (CN6, CN11) .............................23 
5.6 HD Audio Jacks (CN12)......................................................23 

 
 
 
BISD3-QM77 User’s Manual 
vii 
 
5.7 SATA III Port (CN8, CN9)....................................................23 
5.8 LVDS Connectors (CN10)...................................................24 
5.9 DC Power Input Connector (J1)...........................................25 
5.10 DDR3 SO-DIMM Socket (J2, J3).........................................25 
5.11 Half-Size Mini-PCIe (x1) Slot (J4)........................................26 
5.12 Full-Size Mini-PCIe (x1) / mSATA Slot (J7).........................26 
5.13 HDD Power Connector (J5, J6)...........................................27 
5.14 Front Panel Audio Control Connector (J9)...........................27 
5.15 COM3 & COM4 RS-232 Connector (J10, J11)....................28 
5.16 Front Panel Function Connector (J13).................................28 
5.17 Digital I/O (J14)...................................................................29 
5.18 LCD Backlight Connector (JP4, JP5)...................................30 
5.19 Amplifier Output Connector (JP9)........................................31 
5.20 CPU Fan Power Connector (CPU_FAN1) ...........................31 
5.21 System Fan Power Connector (SYS_FAN1) .......................32 
Chapter 3 Drivers Installation.............................................33 
1 Introduction .......................................................................................34 
2 Intel®Chipset Software Installation Utility..........................................35 
3 VGA Driver Installation......................................................................37 
4 HD Audio Driver Installation...............................................................39 
5 LAN Driver Installation.......................................................................41 
6 Intel®iAMT 8.0 Driver Installation......................................................43 
Chapter 4 BIOS Setup..........................................................45 
1 Introduction .......................................................................................46 
2 BIOS Setup.......................................................................................46 
3 Main Settings ....................................................................................48 
4 Advanced Settings ............................................................................49 
4.1 ACPI Computing ..................................................................50 
4.2 Wake up Event Setting.........................................................51 
4.3 CPU Configuration ...............................................................52 
4.4 SATA Configuration .............................................................53 
4.5 Shutdown Temperature Configuration..................................54 
4.6 USB Configuration ...............................................................55 
4.7 Super IO Configuration.........................................................56 
4.8 Hardware Monitor.................................................................58 
4.9 CPU PPM Configuration.......................................................59 
5 Chipset Settings................................................................................60 

viii

BISD3-QM77 User’s Manual

4.5.1 PCH-IO Configuration ..........................................................61

4.5.2 System Agent (SA) Configuration.........................................63

4.6 Boot Settings.....................................................................................65

4.7 Security Settings ...............................................................................66

4.8 Save & Exit Settings..........................................................................67

Appendix........................................................................................68

A. I/O Port Address Map........................................................................69

B. Interrupt Request Lines (IRQ)............................................................73

C. Watchdog Timer Configuration..........................................................75

Chapter 1

General Information

The information provided in this chapter includes:

Features

Packing List

Optional Accessories

Block Diagram

Specifications

Board Overview

Board Dimensions

BISD3-QM77 User’s Manual

1.1 Introduction

BISD3-QM77 is a Mini ITX single board computer based on the platform of Intel®

Gen. 2 CoreTM i3-2330M / i5-2520M. This board offers extensive I/O support,

flexible display port connection and iAMT management. It is able to be operated at

the ambient operating temperature ranging from 0 ~ 60 °C, and even from -20 ~ 80

°C for storage.

Photo of BISD3-QM77

1.2 Features

2 x DDR3L-1066/1333 SO-DIMM slots, expandable up to 16 GB

Output through HDMI, DVI-D, or VGA ports

Configurable watchdog timer and digital I/O

2 x GbE LAN, 4 x USB 2.0, 4 x USB 3.0, 4 x COM, 2 x SATA III

Onboard Intel®Gen. 2 CoreTM i3-2330M / i5-2520M

Tabla de contenidos

Otros manuales de Placa madre de IBASE Technology

IBASE Technology

IBASE Technology ARRANDALE IB957 Manual de usuario

IBASE Technology

IBASE Technology MB886 Manual de usuario

IBASE Technology

IBASE Technology MI985 Manual de usuario

IBASE Technology

IBASE Technology MB875 Manual de usuario

IBASE Technology

IBASE Technology MI999 Manual de usuario

IBASE Technology

IBASE Technology MB900-R Manual de usuario

IBASE Technology

IBASE Technology IB885 Manual de usuario

IBASE Technology

IBASE Technology MB950 Manual de usuario

IBASE Technology

IBASE Technology RM-F6 Series Manual de usuario

IBASE Technology

IBASE Technology MI945 Manual de usuario

IBASE Technology

IBASE Technology MBN500 Manual de usuario

IBASE Technology

IBASE Technology IB818 Manual de usuario

IBASE Technology

IBASE Technology IB831-NB Manual de usuario

IBASE Technology

IBASE Technology MI950 Manual de usuario

IBASE Technology

IBASE Technology MB892 Manual de usuario

IBASE Technology

IBASE Technology MI996 Manual de usuario

IBASE Technology

IBASE Technology MB966 Manual de usuario

IBASE Technology

IBASE Technology IB804 Manual de usuario

IBASE Technology

IBASE Technology IB818F Series Manual de usuario

IBASE Technology

IBASE Technology MI991AF Manual de usuario

IBASE Technology

IBASE Technology IB898 Manual de usuario

IBASE Technology

IBASE Technology IB887 Manual de usuario

IBASE Technology

IBASE Technology MI970VF Manual de usuario

IBASE Technology

IBASE Technology IB940 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario