IBASE Technology IB818 Manual de usuario

The information contained in this document has been carefully researched and is, to the best of our

knowledge, accurate. However, we assume no liability for any product failures or damages, immediate or

consequential, resulting from the use of the information provided herein. Our products are not intended for

use in systems in which failures of product could result in personal injury. All trademarks mentioned herein

are property of their respective owners. All specifications are subject to change without notice.

Manual

iBASE

IB818

3,5” Single-Board Computer with Intel® Atom™ Apollo Lake

Pentium® N4200, Celeron® N3350 und Atom™ E39xx Processor,

2x 48-bit LVDS for two independent TFT Displays, 1x HDMI, COMs, up to -40°..+85°C

IB818F Series

Intel®Pentium®/ Celeron®/

Atom™ x7 SoC

3.5”Disk-Size SBC

User’s Manual

Version 2.0

(Oct. 2019)

IB818F User’s Manual

No part of this publication may be reproduced, copied, stored in a retrieval

system, translated into any language or transmitted in any form or by any

means, electronic, mechanical, photocopying, or otherwise, without the prior

written consent of IBASE Technology, Inc. (hereinafter referred to as

“IBASE”).

Disclaimer

IBASE reserves the right to make changes and improvements to the

products described in this document without prior notice. Every effort has

been made to ensure the information in the document is correct; however,

IBASE does not guarantee this document is error-free.

IBASE assumes no liability for incidental or consequential damages arising

from misapplication or inability to use the product or the information

contained herein, nor for any infringements of rights of third parties, which

may result from its use.

Trademarks

All the trademarks, registrations and brands mentioned herein are used for

identification purposes only and may be trademarks and/or registered

trademarks of their respective owners.

IB818F User’s Manual

iii

Compliance

The product described in this manual complies with all applicable European

Union (CE) directives if it has a CE marking. For systems to remain CE

compliant, only CE-compliant parts may be used. Maintaining CE

compliance also requires proper cable and cabling techniques.

This product has been tested and found to comply with the limits for a Class

B device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with manufacturer’s

instructions, may cause harmful interference to radio communications.

WEEE

This product must not be disposed of as normal household

waste, in accordance with the EU directive of for waste

electrical and electronic equipment (WEEE - 2012/19/EU).

Instead, it should be disposed of by returning it to a

municipal recycling collection point. Check local

regulations for disposal of electronic products.

Green IBASE

This product is compliant with the current RoHS

restrictions and prohibits the use of the following

substances in concentrations exceeding 0.1% by weight

(1000 ppm) except for cadmium, limited to 0.01% by

weight (100 ppm).

•Lead (Pb)

•Mercury (Hg)

•Cadmium (Cd)

•Hexavalent chromium (Cr6+)

•Polybrominated biphenyls (PBB)

•Polybrominated diphenyl ether (PBDE)

IB818F User’s Manual

Important Safety Information

Carefully read the safety information before using the board.

Environmental conditions:

•Use this product in environments with ambient temperatures of 0˚C ~

60˚C, or -40˚C ~d 85 ˚C based on the specifications of the board you

have purchased.

•Do not leave this product in an environment where the storage

temperature is below -40°C or above 110°C. The product must be used

in a controlled environment.

Care for your IBASE products:

•Before cleaning the PCB, unplug all cables and remove the battery.

•Clean the PCB with a circuit board cleaner or degreaser, or use cotton

swabs and alcohol.

WARNING

Attention during use:

•Do not use this product near water or a heat source.

•Do not spill water or any other liquids on this product.

•Do not place heavy objects on the top of this product.

Anti-static precautions

•Wear an anti-static wrist strap to avoid electrostatic discharge.

•Place the PCB on an anti-static kit or mat.

•Hold the edges of the PCB when handling.

•Touch the edges of non-metallic components of the product instead of

the surface of the PCB.

•Ground yourself by touching a grounded conductor or a grounded bit of

metal frequently to discharge any static.

CAUTION

There is a danger of explosion if the lithium-ion battery is replaced with an

incorrect battery. Replace only with the same or equivalent type

recommended by the manufacturer. Dispose of used batteries by observing

local regulations.

IB818F User’s Manual

Warranty Policy

•IBASE standard products:

24-month (2-year) warranty from the date of shipment. If the date of

shipment cannot be ascertained, the product serial numbers can be

used to determine the approximate shipping date.

•3rd-party parts:

12-month (1-year) warranty from delivery for the 3rd-party parts that are

not manufactured by IBASE, such as CPU, CPU cooler, memory,

storage devices, power adapter, panel and touchscreen.

＊PRODUCTS, HOWEVER, THAT FAIL DUE TO MISUSE, ACCIDENT,

IMPROPER INSTALLATION OR UNAUTHORIZED REPAIR SHALL

BE TREATED AS OUT OF WARRANTY AND CUSTOMERS SHALL

BE BILLED FOR REPAIR AND SHIPPING CHARGES.

Technical Support & Services

1. Visit the IBASE website at www.ibase.com.tw to find the latest

information about the product.

2. If you encounter any technical problems and require assistance from

your distributor or sales representative, please prepare and send the

following information:

•Product model name

•Product serial number

•Detailed description of the problem

•Error messages in text or screenshots if any

•The arrangement of the peripherals

•Software used (such as OS and application software)

3. If repair service is required, please download the RMA form at

http://www.ibase.com.tw/english/Supports/RMAService/.

Fill out the form and contact your distributor or sales representative.

 
 
 
vi 
IB818F User’s Manual 
 
Table of Contents 
 
Chapter 1 General Information.............................................1 
1 Introduction .........................................................................................2 
2 Features..............................................................................................2 
3Packing List.........................................................................................3 
4 Optional Accessories...........................................................................3 
5 Specifications......................................................................................4 
6 Block Diagram.....................................................................................6 
7 Overview.............................................................................................7 
8 Dimensions .........................................................................................9 
Chapter 2 HardwareConfiguration........................................11 
1 Basic Installations..............................................................................12 
2 Setting the Jumpers...........................................................................13 
3 Jumper & Connector Locations..........................................................14 
4 Jumpers Quick Reference.................................................................15 
4.1 LVDS Panel Brightness Selection (JP1, JP4).......................15 
4.2 LVDS Panel Power Selection (JP2, JP3)..............................15 
4.3 LCD Panel Backlight VCC (JP5, JP6)...................................15 
4.4 ATX / AT Power Selection (JP7)...........................................16 
4.5 Clearing CMOS Data (JP8) ..................................................16 
4.6 Clearing ME Register (JP9)..................................................16 
5 Connectors Quick Reference.............................................................17 
5.1 LCD Backlight Connector (J3, J6).........................................18 
5.2 LVDS Connector (CH1: J4, CH2: J1) (CH1: J5, CH2: J2)....18 
5.3 Audio Connector (J7) ...........................................................18 
5.4 USB 2.0 Connector (J10) .....................................................19 
5.5 Amplifier Connector (J9).......................................................19 
5.6 SATA HDD Power Connector (J12)......................................19 
5.7 COM2 / COM3 / COM4 RS-232 Port (J18, J19, J14)............19 
5.8 Front Panel Connector (J16) ................................................20 
5.9 Digital I/O Connector (J22)...................................................20 
5.10 DC Power Input (J21)...........................................................20 
5.11 COM1 RS-232/422/435 (CN10)............................................20 

 
 
 
IB818F User’s Manual 
vii 
 
 
Chapter 3 Drivers Installation.............................................21 
1 Introduction........................................................................................22 
2 Intel®Chipset Software Installation Utility...........................................22 
3 VGA Driver Installation.......................................................................24 
4 HD Audio Driver Installation...............................................................26 
5 Intel®Trusted Execution Engine Drivers.............................................28 
6 Intel®Serial IO Drivers.......................................................................30 
7 LAN Driver Installation.......................................................................32 
Chapter 4 BIOS Setup..........................................................35 
1 Introduction........................................................................................36 
2 BIOS Setup........................................................................................36 
3 Main Settings.....................................................................................37 
4 Advanced Settings.............................................................................38 
4.1 ACPI Computing...................................................................39 
4.2 LFP (eDP) to LVDS Configuration.........................................40 
4.3 EFP (DP) to LVDS Configuration..........................................41 
4.4 Fintek Super IO Configuration...............................................42 
4.5 Fintek Super IO Hardware Monitor........................................44 
4.6 CPU Configuration................................................................45 
4.7 AMI Graphic Output Protocol Policy......................................47 
4.8 Network Stack Configuration.................................................48 
4.9 CSM Configuration ...............................................................49 
4.10 USB Configuration................................................................50 
5 Chipset Settings.................................................................................51 
5.1 North Bridge .........................................................................51 
5.2 South Cluster Configuration..................................................52 
6 Security Settings................................................................................57 
7 Boot Settings .....................................................................................58 
8 Save & Exit Settings ..........................................................................59 
Appendix........................................................................................61 
A. I/O Port Address Map ........................................................................62 
B. Interrupt Request Lines (IRQ)............................................................65 
C. Watchdog Timer Configuration...........................................................66 
D. Onboard Connector Types.................................................................70 
 
 

viii

IB818F User’s Manual

This page is intentionally left blank.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de IBASE Technology

IBASE Technology

IBASE Technology IB895 Manual de usuario

IBASE Technology

IBASE Technology MI945P Manual de usuario

IBASE Technology

IBASE Technology IB897 Manual de usuario

IBASE Technology

IBASE Technology MI935 Manual de usuario

IBASE Technology

IBASE Technology MB900-R Manual de usuario

IBASE Technology

IBASE Technology IB822 Series Manual de usuario

IBASE Technology

IBASE Technology MB820 Manual de usuario

IBASE Technology

IBASE Technology MB875 Manual de usuario

IBASE Technology

IBASE Technology IB831-NB Manual de usuario

IBASE Technology

IBASE Technology MB770 Manual de usuario

IBASE Technology

IBASE Technology MBN500 Manual de usuario

IBASE Technology

IBASE Technology MB980 Manual de usuario

IBASE Technology

IBASE Technology MB870 Manual de usuario

IBASE Technology

IBASE Technology MI945X Manual de usuario

IBASE Technology

IBASE Technology MI836F Manual de usuario

IBASE Technology

IBASE Technology MI981 Manual de usuario

IBASE Technology

IBASE Technology BISD3-QM77 Manual de usuario

IBASE Technology

IBASE Technology IB800 Manual de usuario

IBASE Technology

IBASE Technology MI920 Manual de usuario

IBASE Technology

IBASE Technology MI808 Manual de usuario

IBASE Technology

IBASE Technology MI941 Manual de usuario

IBASE Technology

IBASE Technology IB899 Manual de usuario

IBASE Technology

IBASE Technology MI889 Manual de usuario

IBASE Technology

IBASE Technology MB894 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario