IBASE Technology IB804 Manual de usuario
IB804
Intel® Atom 945GSE
PC/104-Plus CPU Module
USER’S MANUAL
Version 1.0
ii
IB804 User’s Manual
Acknowledgments
Award is a registered trademark of Award Software International,
Inc.
PS/2 is a trademark of International Business Machines
Corporation.
Intel® and Atom™ are registered trademarks of Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Winbond is a registered trademark of Winbond Electronics
Corporation.
All other product names or trademarks are properties of their
respective owners.
IB804 User’s Manual iii
Table of Contents
Introduction ..............................................................1
Product Description.............................................................1
Checklist..............................................................................2
Specifications......................................................................3
Board Dimensions...............................................................4
Installations ..............................................................5
Installing the Memory (SODIMM).....................................6
Jumpers and Connector on IB804.......................................7
BIOS Setup .............................................................15
Drivers Installation.................................................37
Intel Chipset Software Installation Utility.........................38
VGA Drivers Installation ..................................................39
LAN Drivers Installation...................................................40
Appendix.................................................................45
A. I/O Port Address Map...................................................45
B. Interrupt Request Lines (IRQ)......................................46
C. Watchdog Timer Configuration....................................47
iv IB804 User’s Manual
This page is intentionally left blank.
INTRODUCTION
IB804 User’s Manual 1
Introduction
Product Description
The IB804 PCI-104+ SBC a small footprint single board computer that
is configured with the Intel Atom processor N270 at 1.6GHz, FSB533
and the Mobile Intel 945GSE Express Chipset with the ICH7M.
This PCI-104+ board provides greater flexibility for developers of
embedded computing solutions. It is ideally suited for rugged and
compact designs as in Internet devices and applications in automation,
industrial control, data acquisition, thin client and other embedded PC
applications.
IB804 features the Intel's Graphics Media Accelerator 950 core, making
it compatible with Windows Vista Premium, and support display
interfaces including VGA CRT and single channel 18-bit LVDS
displays. One DDR2 SO-DIMM on board implements up to 1GB of
system memory. One Gigabit LAN, with Intel 82574L controller, is also
available.
Advanced connectivity and expansion interfaces are provided by one
IDE, two RS-232 serial ports and four USB 2.0 high-speed ports.
Remarks: In installing the PC/104 Plus CPU board into a chassis, it is
recommended that the CPU board be placed on the topmost level of the
PC/104 board layers. The chassis environment should be designed in
such a way that there is good airflow to ventilate the system.
INTRODUCTION
2 IB804 User’s Manual
Checklist
Your IB804 package should include the items listed below. Damaged or
missing items should be reported to your supplier.
•The IB804 CPU Module
•This User’s Manual
•One Driver CD
•Optional cable kit (IDE, PS2, VGA, USB, COM, LAN)
INTRODUCTION
IB804 User’s Manual 3
Specifications
Form Factor PCI 104+ SBC
CPU Type Intel® Atom™ processor N270 (code name
Diamondville)
Speed / FSB CPU Clock speed = 1.60GHz
FSB=533MHz
L2 Cache=512K
Green /APM APM1.2
BIOS Award BIOS: supports ACPI Function
Chipset Intel® 945GSE Chipset
GMCH: QG82945GSE
ICH7M: NH82801GBM
Memory DDRII 533 SO-DIMM x 1 (w/o ECC function), supports
Single channel. Max. 1GB
VGA Intel® 945GSE built-in Graphics Media Accelerator 950
Graphics Core -----Supports CRT w/ DF13 connector &
18 bits single channels LVDS interface w/ DF13 socket
LAN Intel® 82574L Gigabit Ethernet Controller x 1
USB ICH7M built-in USB 2.0 host controller, support 4 ports
Audio N/A
IDE ICH7M built-in Ultra DMA 33/66/100, 44-pin box-header
x1 for IDE
LPC I/O Winbond® 83627EHG:
- COM1 (RS232), COM2 (RS232),
- Keyboard/mouse pin-header
- Hardware monitor (3 thermal inputs, 6 voltage monitor
inputs)
RTC/CMOS ICH7M built-in with on board Lithium battery
Expansion Slot PCI 104 plus (PCI only, No ISA support)
Onboard
Header /
Connectors
DF13 Socket x1 for LVDS
DF11 16-pin for VGA
44-pin box header x1 for IDE (90 degree)
2x8-pin header x1 for Gigabit LAN port
2x4-pin header x2 for 4 USB ports (one pin-header is 90
degree)
2x5-pin header x2 for COM1/COM2 (90 degree)
1x6-pin header x1 for PS2 KB/MS
Power
Connector 4-pin DC power connector x1 (+5V, +12V)
Digital I/O N/A
Watchdog
Timer Yes (256 segments, 0, 1, 2…255. sec/min)
Board Size 96 x 90mm (3.78” x 3.54”)
INTRODUCTION
Board Dimensions
4 IB804 User’s Manual
INSTALLATIONS
IB804 User’s Manual 5
Installations
This section provides information on how to use the jumpers and
connectors on the IB804 in order to set up a workable system. The topics
covered are:
Installing the Memory (SODIMM) ....................................................... 6
Jumpers and Connector on IB804 ......................................................... 7
INSTALLATIONS
Installing the Memory (SODIMM)
The IB804 CPU board supports one DDR2 memory socket that can
support up to 1GB memory, DDR2 400/533 (w/o ECC function).
Installing and Removing Memory Modules
To install the DDR2 modules, locate the memory slot on the board and
perform the following steps:
1. Hold the DDR2 module so that the key of the DDR2 module aligns
with that on the memory slot. Insert the module into the socket at a
slight angle (approximately 30 degrees). Note that the socket and
module are both keyed, which means that the module can be installed
only in one direction.
2. To seat the memory module into the socket, apply firm and even
pressure to each end of the module until you feel it slip down into the
socket.
3. With the module properly seated in the socket, rotate the module
downward. Continue pressing downward until the clips at each end
lock into position.
4. To remove the DDR2 module, press the clips with both hands.
6 IB804 User’s Manual
Tabla de contenidos
Otros manuales de Placa madre de IBASE Technology
IBASE Technology
IBASE Technology IB887 Manual de usuario
IBASE Technology
IBASE Technology MB998 Series Manual de usuario
IBASE Technology
IBASE Technology MI957 Manual de usuario
IBASE Technology
IBASE Technology ET980 Series Manual de usuario
IBASE Technology
IBASE Technology IP400 Manual de usuario
IBASE Technology
IBASE Technology MB970 Manual de usuario
IBASE Technology
IBASE Technology MI808 Manual de usuario
IBASE Technology
IBASE Technology IB800 Manual de usuario
IBASE Technology
IBASE Technology IB899 Manual de usuario
IBASE Technology
IBASE Technology MBD301 Manual de usuario
IBASE Technology
IBASE Technology IB895 Manual de usuario
IBASE Technology
IBASE Technology MI980 Manual de usuario
IBASE Technology
IBASE Technology MI945 Manual de usuario
IBASE Technology
IBASE Technology MB991 Manual de usuario
IBASE Technology
IBASE Technology LV-67H Manual de usuario
IBASE Technology
IBASE Technology MB990 Manual de usuario
IBASE Technology
IBASE Technology MB870 Manual de usuario
IBASE Technology
IBASE Technology MI808 Manual de usuario
IBASE Technology
IBASE Technology IB730 Manual de usuario
IBASE Technology
IBASE Technology MI836F Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
