Huawei T-Mobile webConnect UMG181 Manual de usuario

No part of this document may be reproduced or transmitted in any form or by any means without

prior written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their

respective holders.

Notice

The information in this document is subject to change without notice. Every effort has been made in

the preparation of this document to ensure accuracy of the contents, but all statements,

information, and recommendations in this document do not constitute the warranty of any kind,

express or implied.

Table of Contents

Getting to Know the UMG181....................................................................................................... 1

PC Requirements ...........................................................................................................................3

Preparing the UMG181..................................................................................................................4

Installation Guide...........................................................................................................................5

Safety Information ......................................................................................................................... 8

12 MONTH LIMITED WARRANTY .................................................................................................15

Thank you for purchasing Huawei UMG181 HSPA Rotate USB

Stick.

Note:

This manual briefly describes the preparation, the process for installing/uninstalling, and safety

precautions for using Huawei UMG181 HSPA Rotate USB Stick (hereinafter referred to as the

UMG181).

Read the manual before using the UMG181.

Getting to Know the UMG181

The following figures show the appearance of the UMG181. The actual device may differ.

nRotatable USB connector

This is where the UMG181 connects to the USB interface of your PC.

oUSIM/SIM card slot

Open the lid to insert the USIM/SIM card in the slot.

pRF Output Power Port

Connects the RF cable.

qIndicator

Indicates the status of the UMG181.

Green, blinking twice every 3s: The UMG181 is powered on.

Green, blinking once every 3s: The UMG181 is registered to a GSM/GPRS/EDGE network.

Blue, blinking once every 3s: The UMG181 is registered to a WCDMA/HSDPA network.

Green, always on: The GPRS/EDGE connection is set up.

Blue, always on: The WCDMA connection is set up.

Cyan, always on: The HSDPA connection is set up.

Off: The UMG181 is removed from the PC.

\Micro SD card slot

Insert a micro SD card here.

PC Requirements

To use the UMG181, your PC must meet the following requirements:

Standard USB interface.

Windows XP SP2, Windows Vista.

Mac OS X 10.4 and 10.5 with latest upgrades.

The hardware of your PC must meet or exceed the recommended system requirements for the

installed version of OS.

Display resolution: 800 × 600 or above.

Preparing the UMG181

1. Remove the back cover of the UMG181.

2. Insert the USIM/SIM card and the micro SD card into the card slots. Make sure that the cards

are properly inserted.

Note:

A micro SD card is an optional accessory and not included with your device.

Do not remove the USIM/SIM card and the micro SD card when they are being used. Removing

the cards during an operation may damage the cards as well as the device, and data stored on

the cards may be corrupted.

When removing the USIM/SIM card from the UMG181, press the card barrier (as indicated by 1

in the following figure).

Card barrier

USIM/SIM Card

Installation Guide

The procedure for installing the management program depends on the operating system installed

on your PC. The following section takes Windows XP as an example.

Connecting the UMG181 with a PC

Note:

Turn on your PC before connecting the UMG181 with it. Otherwise, the normal installation of the

UMG181 may be affected.

Method 1: Plug the UMG181 into the USB interface of the PC.

Method 2:connect the UMG181 to a PC using the USB extension cable.

Installing the UMG181 Management Program

1. Connect the UMG181 with the PC.

2. The OS automatically detects and recognizes new hardware and starts the installation wizard.

Note:

If the auto-run program does not respond, find the AutoRun.exe file in the driver path. Then

double-click AutoRun.exe to run the program.

3. Follow the prompts of the installation wizard.

4. After the program is installed, the shortcut icon of the management program is displayed on

the desktop of your PC.

Launching the Management Program

After the UMG181 is installed, the management program is launched automatically. Then every time

the UMG181 is connected to the PC, the management program is launched automatically.

You can also double-click the shortcut icon on the desktop to launch the management program.

Uninstalling the Management Program

1. On your PC, select Start > Control Panel.

2. Find the management program, and click Add/Remove Program to uninstall the management

program.

Note:

It is recommended that you restart the PC after the uninstallation to ensure that the management

program is completely uninstalled.

Removing the UMG181

1. Double-click in the system tray. The Unplug or Eject Hardware interface is displayed.

2. Select the hardware related to the UMG181 and click Stop.

3. When the prompt "It is safe to remove the device" is displayed, remove the UMG181.

In this way, the integrity of the data stored on the SD card can be ensured.

Note:

Before removing the UMG181, exit the management program.

Safety Information

Read the safety information carefully to ensure the correct and safe use of your wireless device.

Regulatory Notices

UMG181 complies with Parts 15, 22, and 24 of the FCC rules. It has been tested by using a typical

PC with a USB port. This USB device must not be located or operated near any other antenna or

transmitter.If you use this USB device in any other configuration, the FCC RF Exposure compliance

limit can be exceeded.

Operating Conditions

This device may not cause harmful interference and must accept any interference received, including

interference that may cause undesirable operations.

Warnings and Cautions

Modifying or changing this USB device without express authorization may nullify compliance

with RF exposure guidelines.

This USB device has been tested and found to comply with the limits pursuant to Parts 15, 22,

and 24 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference when appropriately installed. This USB device generates, uses, and can

radiate radio frequency and, if not installed and used according to the instructions provided, it

may cause harmful interference to radio communication. However, there is no guarantee that

interference will not occur in any particular installation.

This USB device does not exceed the Class B limits for radio noise emissions from digital

apparatus as set out in the interference causing equipment standard entitled “Digital

Apparatus”, ICES-003 of the Department of Communications.

If you have purchased this product under a United States Government contract, it shall be subject to

restrictions as set forth in subparagraph (C) (1) (ii) of Defense Federal Acquisitions Regulations

(DFARs) Section 252.227-7013 for Department of Defense contracts and as set forth in Federal

Tabla de contenidos

Otros manuales de Módem de Huawei

Huawei

Huawei B660 Manual de usuario

Huawei

Huawei Maxis E5832 Manual de usuario

Huawei

Huawei E169 Hoja de instrucciones

Huawei

Huawei EC189 Manual de usuario

Huawei

Huawei E600 Manual de usuario

Huawei

Huawei SoftBank 604HW Manual de usuario

Huawei

Huawei E1612 Manual de usuario

Huawei

Huawei EG162 Manual de usuario

Huawei

Huawei BM632 Manual de usuario

Huawei

Huawei HiLink K3773 Manual de usuario

Huawei

Huawei E170 HSPA Manual de usuario

Huawei

Huawei E180 Manual de usuario

Huawei

Huawei WiMAX Guía de referencia

Huawei

Huawei E397 4G LTE Mobile Internet Key Manual de usuario

Huawei

Huawei E1831 Manual de usuario

Huawei

Huawei E272 Manual de usuario

Huawei

Huawei D105 Manual de usuario

Huawei

Huawei E156C Manual de usuario

Huawei

Huawei EC228 Manual de usuario

Huawei

Huawei E176G Manual de usuario

Huawei

Huawei HG532D Manual de usuario

Huawei

Huawei E220 Manual de usuario

Huawei

Huawei E366 Manual de usuario

Huawei

Huawei MT886 Manual de usuario

Manuales populares de Módem de otras marcas

Davicom

Davicom DM562AP Manual de usuario

EpiValley

EpiValley TATA indicom SXC-1080 Manual de usuario

Zte

Zte WiMAX Manual de usuario

Intelimax

Intelimax MA-2060 Manual de usuario

SMC Networks

SMC Networks D3CM1604V Manual de uso y cuidado

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manual de usuario

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manual de usuario

Samsung

Samsung AceLink SAM-335A Manual de usuario

Enfora

Enfora Enabler-G Guía de configuración rápida

iRZ

iRZ ATM2-232 Manual de usuario

Zhone

Zhone 6310 Manual de usuario

Paradyne

Paradyne Hotwire 7976 Manual de usuario

US Robotics

US Robotics 3453C Manual de usuario

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manual de usuario

Zte

Zte MF823 Manual de usuario

Four-Faith

Four-Faith F1403 Manual de usuario

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manual de usuario

Gemtek

Gemtek WiMAX WIXFBR-103 Manual de usuario