Huawei H350L/B890-66s Manual de usuario

H350L/B890-66s LTE Wireless Gateway

Quick Start

1Installing your H350L/B890-66s

Follow the steps below to have an initial installation of your H350L/B890-66s.

Step 1 Insert SIM card into the SIM Card Slot.

Step 2 Connect the power adapter to the power port and plug into the wall socket.

The H350L/B890-66s will power on automatically.



Interferences or obstacles may block wireless signal. Place the H350L/B890-66s at

an indoor open area or close to a window.



To prevent interference caused by radio signals, place the H350L/B890-66s at least

1 meter (3.28 feet) away from telephone and other electrical devices.

Before removing the

SIM card, ensure that H350L/B890-66s is powered off and

disconnected from the power outlet.

Step 3 Wait for about 60 seconds for the Internet connection initialization. Check

the indicators on the front panel of your H350L/B890-66s. If they are lit as

description below, you are ready to connect the internet.

Power indicator

Solid White: the H350L/B890-66s is powered

on.

Wireless Signal

indicator

Solid Blue or Cyan: the H350L/B890-66s is

registered with the wireless network.

If this indicator is red and blinking, power off the

H350L/B890-66s and ensure your SIM card is

inserted correctly.

Wireless network

connection

indicator

Solid: the H350L/B890-66s is connected to the

wireless network.

If this indicator is blinking continuously, power

off the H350L/B890-66s for 2 minutes and try

again.

2Setting up an Internet Connection

You can connect your devices (computer, laptop, tablet, etc.) to the H350L/B890-66s

via a wired or wireless (Wi-Fi) connection to access to the Internet.

Follow the steps below to have an Internet connection according to your device.

Wired Connection with an Ethernet Cable

Step 1 Connect an Ethernet cable to one of the 3 LAN ports and connect the other

end to your computer.

Step 2 Check the LAN indicators ( / / ) on the front panel of your

H350L/B890-66s.

If they are lit as description below, you are ready to access to the Internet

through the computer.

/ /

LAN indicators

Solid: 1, 2 or 3 will be lit depending on which

LAN port you are connected to.

Blinking: data is transferring.

Do not

connect the Ethernet cable to the WAN port that is closest to the right hand

de of the H350L/B890-66s.

Wireless (Wi-Fi) Connection

Step 1 Ensure that on the front panel is steady on and Wi-Fi is enabled on

your device (computer, laptop, tablet, etc.).

Step 2 From your device, scan for wireless networks in your area. Connect to the

network name that matches the SSID found on the Wireless Security Sticker

on the bottom of your H350L/B890-66s.

Step 3 Wait for about 30 seconds to establish the connection. Your Wi-Fi enabled

device will notify you when it is connected.

Step 4 You may connect up to 32 Wi-Fi enabled devices. Repeat steps 1 through 3.



Wi-Fi Encryption of the H350L/B890-66s is open as default. To protect your

wireless network from unauthorized access,

you can log into the web management

page and set a Wi-Fi password.



If you are using Windows Vista or later, you can press the WPS button on the top

of your H350L/B890-66s for 6 seconds instead of entering the Wi-Fi Password.

3Connecting to a telephone

Follow the steps below to connect a telephone to your H350L/B890-66s to make

voice call, you will require an addional voice plan to use this feature

Step 1 Connect a standard telephone to the Telephone Port with a RJ-11 telephone

cable.

Step 2 Check the indicators the front panel of your H350L/B890-66s. If they are lit

as description below, you are ready to make calls using your H350L/B890-

66s.

Voicemail

indicator

Blinking: new voicemail messages.

To check your voicemail, you can:

Dial the voice mail number printed on the SIM card

and hold the 1.



Dial your telephone number to access to voicemail.

Call status

indicator

Not lit

Solid white when you are on a call.

This indicator will blink when you are receiving a call in

addition to your phone ringing.

Do not connect the B882 to the telephone wall outlet (or any Pu

blic Switched

Telephone Network), because doing so could damage the

H350L/B890-66s due to

excessive heat.



Radio signals can interfere with the telephone call connection and quality. To

eliminate the risk of possible interference, place the telephone at least 1 meter

away from the H350L/B890-66s.



Fax is not support on the H350L/B890-66s.

4First Time Logging into the Web User

Interface

You can configure and manage the H350L/B890-66s settings using the web user

interface.

Step 1 Launch a web browser, and enter http://device.webui or

http://192.168.20.1 in the address bar.

Step 2 Enter the password, and log in to the web user interface. The default

password is printed as WEBUI Login on the Wireless Security Sticker

located on the bottom of the H350L/B890-66s.

Step 3 Follow the instruction to configure the Wi-Fi encryption.

Setting a strong wireless security level (such as WPA/WPA2-PSK – AES+TKIP)

can prevent unauthorized access to your Wi-Fi, and enter a Wi-Fi password

you wish to use in WPA pre-shared key.



To protect your H350L/B890-66s, only one user can log in to the web user

interface at a time.



To protect your account, change the password immediately. For details, see the

online help information on the web user interface.

Step 4 Get yourself familiar with common features.

Home Page:

> Main status banner: show current status or error messages of the

H350L/B890-66s

> Language selection (in the right up corner): Switch language both will

affect to the web user interface and audio error messages in the

telephone.

> Help hyperlink (in the right up corner): get into help information

pages.

Balance:

Learn current balance information of your SIM card.

5Getting to Know Your H350L/B890-66s

Appearance

SIM card slot Wired connection indicator

Network connection button USB indicator

Wi-Fi/WPS button Power button

Power indicator Power port

Network mode indicator Telephone port

Wi-Fi/WPS indicator USB port*

Voicemail indicator LAN port

Call status indicator WAN port

Wireless connection indicator Reset button

LAN indicator

* USB port: to connect to a USB storage device, or USB printer. Not for USB host devices such as computers.

This port can provide a current up to 500mA. If this port is connected to a portable hard disk drive (or other

peripherals) whose required current beyond what the H350L/B890-66s can provide, please use an auxiliary

power supply for the hard disk drive.

Tabla de contenidos

Otros manuales de Puerta de Huawei

Huawei

Huawei HG523a Manual de usuario

Huawei

Huawei LTE CPE B5328-155 Especificaciones técnicas

Huawei

Huawei eSpace EGW1530B Manual de usuario

Huawei

Huawei USG6310 Manual de usuario

Huawei

Huawei HG256 Manual de usuario

Huawei

Huawei EchoLife HG520s Manual de usuario

Huawei

Huawei SmartAX MT841 Manual de usuario

Huawei

Huawei ECHOLIFE HG520C Manual de usuario

Huawei

Huawei HG530 Manual de usuario

Huawei

Huawei HG655b Manual de usuario

Huawei

Huawei eA360 Series Manual de usuario

Huawei

Huawei HG659 Manual de usuario

Huawei

Huawei RRU3808 V200 Manual de usuario

Huawei

Huawei EchoLife HG8247 Manual de usuario

Huawei

Huawei eA660 Series Especificaciones técnicas

Huawei

Huawei IAD108A Manual de usuario

Huawei

Huawei AR-Sc Series Manual de usuario

Huawei

Huawei HG622 Manual de usuario

Huawei

Huawei EchoLife HG620 Manual de usuario

Huawei

Huawei HG533 Manual de usuario

Huawei

Huawei HA35 Manual de usuario

Huawei

Huawei DAU eA680 Manual de usuario

Huawei

Huawei HG523 Manual de usuario

Huawei

Huawei HG630 Especificaciones técnicas

Manuales populares de Puerta de otras marcas

LST

LST M500RFE-AS Manual de usuario

Kinnex

Kinnex Media Gateway Manual de usuario

2N Telekomunikace

2N Telekomunikace 2N StarGate Manual de usuario

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manual de usuario

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manual de usuario

Telsey

Telsey CPVA 500 - SIP Manual de usuario

RTA

RTA 460A-NNA4 Hoja de especificaciones

Shaw

Shaw Gateway HDPVR Manual de usuario

ABB

ABB VSN900 Guía de inicio rápido

Commander

Commander Pulse Manual de usuario

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manual de usuario

NETGEAR

NETGEAR C6300BD Manual de usuario

Amit

Amit CDW531AM Manual de usuario

HMS

HMS Netbiter EasyConnect EC150 Manual de usuario

AT&T

AT&T U-verse 3801 Manual de uso y cuidado

Logic IO

Logic IO RTCU MX2 turbo Manual de usuario

Suttle

Suttle MediaMAX MXM-521 Manual de usuario

RTA

RTA 460MCBC-N2E Hoja de especificaciones