HP J8772B Instrucciones de montaje

Product End-of-Life Disassembly Instructions

Product Category: Networking Equipment

Marketing Name / Model

[List multiple models if applicable.]

HP ProCurve Switch 4202vl-72 (J8772B)

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA) With a surface greater than 10 sq cm

1 backplane PCA, 1 console PCA, 3 modules 5

Batteries All types including standard alkaline and lithium coin

or button style batteries 0

Mercury-containing components For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries 0

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm Includes background illuminated displays with gas

discharge lamps 0

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing PCB/PCT) 0

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height 0

External electrical cables and cords 0

Gas Discharge Lamps 0

Plastics containing Brominated Flame Retardants 0

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent

chambers, and service stations. 0

Components and waste containing asbestos 0

Components, parts and materials containing

refractory ceramic fibers 0

Components, parts and materials containing

radioactive substances 0

EL-MF877-00 Page 1

Template Revision A

EL-MF877-00 Page 2

Template Revision A

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description Tool Size (if

applicable)

Torx driver T-10

Nut Driver 3/16”

Wire Cutters Medium

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Remove any blank slot cover by disengaging the two retaining screws on each slot cover.

2. Peel off overlay pasted over the installed modules on the right bank of the chassis. Remove metal plate underneath the

overlay by removing mounting screws.

3. Pull out the installed modules. To remove the big heatsink on each module, release spring clip (use a pair of pliers if

necessary) from the two solder anchors, which it is hooked onto. Remove black protective polycarbonate sheet surrounding

the heatsink. Twist and pull the big heatsink out (apply heat if necessary to loosen the heatsink from its fixed position).

4. Remove power supply unit(s)/blank cover at rear of chassis. Refer to power supply product disassembly instruction to

remove components/materials requiring selective treatment in power supplies.

5. Remove backplane PCA by disconnecting the fan tray connector and removing torx mounting screws, then pulling on the

circular pull tab at top of PCA.

6. Remove two bolts on RS-232 connector on front bezel of chassis. Connector is part of Console PCA.

7. Remove console PCA by sliding it to the rear of the chassis.

8. Remove fan tray assembly by removing two torx screws on left side cover (outside) and sliding tray out back of chassis.

Use wire cutters to cut wire harness free. Release push tabs retaining fans and separate from metal frame.

9. Remove plastic side cover by sliding it toward front of chassis to disengage catches.

10. Remove plastic top cover by lifting left edge of cover and simultaneously sliding to left to disengage catches.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Tabla de contenidos

Otros manuales de Cambiar de HP

HP OfficeConnect 1920S 8G Manual del operador

HP 6125G/XG Instrucciones de uso

HP StorageWorks 2/16 - SAN Switch Manual de usuario

HP B-Series Instrucciones de uso

HP 10500 series Manual de usuario

HP ProCurve 2510 Manual de usuario

HP 6125XLG Manual de usuario

HP FlexFabric 5700 series Manual de usuario

HP 316095-B21 - StorageWorks Edge Switch 2/24 Guía de inicio rápido

HP 1410-24-R Manual de usuario

HP 12500 Series Manual de usuario

HP Deskjet 870 Manual de instrucciones

HP 316095-B21 - StorageWorks Edge Switch 2/24 Manual de usuario

HP ProCurve 1600M Manual de usuario

HP 5500 EI series Manual de usuario

HP Compaq Presario,Presario 1910 Manual de usuario

HP 6125XLG Manual de usuario

HP 316095-B21 - StorageWorks Edge Switch 2/24 Manual de instrucciones

HP ProCurve 3500yl-24G-PWR Manual de usuario

HP AA979A - StorageWorks SAN Switch 2/8V Manual de servicio

HP ARUBA 2930M 40G 8 SMRT RTE POE+ 1S Instrucciones de montaje

HP J3102A Manual de usuario

HP SN3000B Manual de programación

HP PROCURVE 2910AL Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario