HP 5830AF-48G Series Instrucciones de montaje

Product End-of-Life Disassembly Instructions

Product Category: Calculators

Marketing Name / Model

[List multiple models if applicable.]

HP 5830AF-48G Series Switch Chassis

（

JG316A

）

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA)

With a surface greater than 10 sq cm

Batteries

All types including standard alkaline and lithium coin

or button style batteries

Mercury-containing components

For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm

Includes background illuminated displays with gas

discharge lamps

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

weighing > 25 grams (not including PCBs or PCAs

already listed as a separate item above)

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent

chambers, and service stations.

Components and waste containing asbestos

Components, parts and materials containing

refractory ceramic fibers

Components, parts and materials containing

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

EL-MF877-00 Page 1

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Tool Description

Tool Size (if

applicable)

Screw driver

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Unscrew the screws on mounting angle 1, and then remove mounting angle 1.

2. Unscrew the screws on mounting angle 2, and then remove mounting angle 2.

3. Unscrew the screws on filler panel 3, and then remove filler panel 3.

4. Unscrew the screws on fan-assembly 4, and then remove fan-assembly 4.

5. Remove the filler panel 5.

6. Remove the power 6.

7. Unscrew the screws on top cover 10, and remove top cover 10.

8. Unscrew the screws on front panel 7, and then remove front panel 7.

9. Unscrew the screws on bracket 9, and then remove bracket 9.

10. Unscrew the screws on bracket 11, and then remove bracket 11.

11. Unscrew the screws on heat sink 12, and then remove heat sink 12.

12. Unscrew the screws on PCB 13, and remove PCB 13.

13. Remove all of the labels.

14. Remove film 4-8.

15. Unscrew the screws on 4-7, and then remove 4-7.

16. Unscrew the screws on 4-6, and then remove 4-6.

17. Unscrew the screws on 4-5, and then remove 4-5.

18. Unscrew the screws on 4-4, and then remove 4-4.

19. Unscrew the screws on pcb 4-9, and then remove 4-9.

20. Unscrew the screws on pulled handle 4-1, and then remove pulled handle 4-1.

21. Remove lamp 4-2.

22. Remove bushing 4-3.

23. Unscrew the screws on 5-1, and then remove 5-1.

24. Remove shielding finger 5-3.

25. Remove film 7-1.

26. Remove film 7-2.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

EL-MF877-00 Page 2

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Figure 1Remove mounting angle Figure 2 Rear of HP S5810-52C-EI

Figure 3Treatments to the product Figure 4 Treatments to fan-assembly 4

Figure 5 Treatments to filler panel 5 Figure 6 Treatments to front panel 7

3.3 Material of the facility built

Facility

Components

Material

Weight(g)

Weight

percentage

Selective treatment for

materials and components

Details

Chassis

1.2%

recycling

EL-MF877-00 Page 3

Template Revision B

PSG instructions for this template are available at EL-MF877-01

180

recycling

0.5%

recycling

4-1

0.4%

recycling

4-4

0.2%

recycling

4-5

PBT, Cu

580

9.4%

Pla

recycling

4-6

0.6%

recycling

4-7

0.7%

recycling

4-9

Complex

PWB

0.3%

The surface of PCB is

greater than 10

square centimeters

；

4-10

210

3.4%

5-4

100

1.6%

Fe,

Complex

PWB

1000

16.1%

7-3

361

5.8%

recycling

Complex

PWB

1620

26.2%

The surface of PCB is

greater than 10

square centimeters;

electrolyte capacitor

height is more than 25

0.22%

recycling

1766

28.5%

recycling

0.3%

recycling

0.1%

recycling

Complex

PWB

0.6%

The surface of PCB is

greater than 10

square centimeters;

electrolyte capacitor

height is more than 25

EL-MF877-00 Page 4

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Cambiar de HP

HP ProCurve 10Base-T 12 Manual de usuario

HP A5500 SI Switch Series Manual de usuario

HP ProCurve 1600M Manual de usuario

HP StorageWorks 2/140 - Director Switch Manual de instrucciones

HP HCPL-2400 Manual de instrucciones

HP StorageWorks 2/140 - Director Switch Manual de usuario

HP FlexFabric 11908-V Manual de usuario

HP 5500 HI Series Manual de usuario

HP 489183-B21 - InfiniBand DDR Switch Manual de usuario

HP 5120 SI Series Manual de usuario

HP Bc1500 - BladeSystem - Blade PC Manual de usuario

HP 5600-48XG-4QSFP+ series Manual de usuario

HP 3100 v2 Series Manual de instalación

HP StorageWorks 2/32 - SAN Switch Manual de instrucciones

HP ProCurve 2512 Manual de usuario

HP ProCurve J8766A Manual de usuario

HP AA979A - StorageWorks SAN Switch 2/8V Manual de usuario

HP Aruba CX 10000-48Y6C Instrucciones de instalación

HP 5920 Manual de usuario

HP ProCurve Switch 1800-24G Manual de usuario

HP 2920 Series Manual de usuario

HP HP 5120 series Manual de usuario

HP ProCurve 1600M Manual de usuario

HP 5920 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario