HP StorageWorks 4/8 - SAN Switch Manual de instrucciones

HP StorageWorks Fabric OS 6.2.0b

release notes

Part number: 5697-0352

Second edition: March 2010

Legal and notice information

Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.212,

Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S.

Government under vendor's standard commercial license.

The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the

express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional

warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Microsoft and Windows are registered trademarks of Microsoft Corporation.

Version

6.2.0b

NOTE:

This software conforms to the Fibre Channel standards and to accepted engineering practices and

procedures.

Effective date

March 2009

Description

Fabric OS 6.2.0b introduces support for the HP StorageWorks Encryption SAN Switch and the HP

DC Switch Encryption FC Blade. These products provide the following features:

•Data encryption support for B-Series fabrics

•Key Management support for HP Secure Key Manager (SKM)

Fabric OS 6.2.0a integrated the following new features (these features continue to be supported in

Fabric OS 6.2.0b):

•Support for the new HP StorageWorks DC04 SAN Director

•192 ports, 8–Gb technology in 8U chassis (without required front airflow mounting kit, 9U

with kit)

•Supports existing 8–Gb FC blades (16, 32, and 48 port)

•Supports existing 10–Gb 6 port ISL blade

•Supports existing Multi-protocol Router blade

•Supports ICL connectivity to other DC04 and DC SAN Backbone directors

•Virtual Fabrics (VF)

•Full VF feature support on HP StorageWorks DC SAN Backbone Director, HP StorageWorks

DC04 SAN Director, HP StorageWorks 8/80 SAN Switch, and HP StorageWorks 8/40 SAN

Switch.

•Single physical chassis can be subdivided into two or more logical switches, creating a logical

fabric with other switches.

•Per-port assignment of ports to logical switches

•Shared ISLs provide connectivity for multiple logical fabrics.

•FCR and FCIP enhancements

•FCIP (SCSI) read tape pipelining

•Enhancements to SoTCP

•LSAN tagging

•Support Pathinfo over MetaSAN

HP StorageWorks Fabric OS 6.2.0b release notes 3

•Use FSPF cost in FCR backbone fabric to find shortest path to edge fabric

•In-band management link over FCIP connections for HP StorageWorks 400 Multi-protocol

Router

•TCP byte streaming for FCIP connections with WAN optimization hardware

•Improved FCIP statistics support, including TCP connection history, high watermark information,

and connection snapshot capability

•Support temporary licenses for Adaptive Networking, Integrated Routing, and Fabric Watch

•Security enhancements

•IPv6 auto-configuration

•IPSec with IPv6 (for management port)

•Configurable switch-wide policy requiring authentication of all HBAs

•RADIUS enhancements allowing password expiration and source IP address information

•LPAD enhancement allowing for alternate domain UPN

•IPv6 certified for JITC Approved Product List

•FICON enhancements

•RNID support for CUP

•New FC addressing modes for support with virtual fabrics

•Support for HP StorageWorks SAN Director 48 Port 8Gb FC Blade with VF-enabled HP Stor-

ageWorks DC SAN Backbone Director and DC04 SAN Director for FICON environments

•Access Gateway enhancements

•AG mode support on HP StorageWorks 8/40 SAN Switch.

•Miscellaneous

•FC ping support between switches (ping switch WWN)

•Provision of path information via CLI

•Frame redirection support in interopmode 3 (McDATA Open Fabric Mode)

•Support for M-EOSn's 239 Domain ID mode via FCR in interopmode 3

•System-wide RASLOG

•Port auto-disable support

•Ethernet port bonding for management ports

•New CLI command to configure F_Port receive buffer credits

New feature descriptions

This section describes the new features that were introduced in Fabric OS 6.2.0a.

Virtual fabrics

•Virtual Fabrics (VF) is a new capability supported on the HP StorageWorks DC SAN Backbone

Director, DC04 SAN Director, HP StorageWorks 8/80 SAN Switch, and HP StorageWorks 8/40

SAN Switch. Once enabled, VF allows the user to divide a single physical chassis or switch into

multiple logical switches by assigning individual ports to a logical switch. Each of these logical

switches is managed as a completely independent layer 2 Fibre Channel switch, and can be de-

ployed in independent fabrics known as logical fabrics.

•VF also allows the user to create a special logical switch known as the base switch, used for

connectivity to other base switches and also as a backbone fabric for Fibre Channel Routing. In-

dividual logical fabrics may utilize this shared base fabric for connectivity to other switches,

providing efficient use of resources by sharing common ISL and ICL connections among multiple

logical fabrics.

•The Virtual Fabrics feature is part of the base Fabric OS and does not require a license. Virtual

Fabrics is fully compatible with legacy Brocade products as well as M-Series switches and directors.

FCR and FCIP enhancements

•FCIP (SCSI) Read Tape Pipelining anticipates host read operations and buffers data to reduce

latency from the FCIP WAN.

•LSAN Tagging provides special behavior for designated LSAN zones using either a new speed

tag or enforce tag. The enforce tag allows individual FCRs to be configured only to import devices

in specific LSAN zones, increasing scalability. The speed tag allows designated targets to remain

imported, allowing sensitive hosts to discover targets much faster. This is useful when performing

boot over LSAN operations

•SoTCP Enhancements improve network congestion management in Slow Start Mode and helps

prevent host I/O timeouts.

•Support for Pathinfo over MetaSAN. The Pathinfo command has been enhanced to provide

path information across routed fabrics, which is especially useful when troubleshooting connectivity

problems across routed fabrics.

•FSPF cost in FCR backbone fabric uses the most efficient route to reach a destination fabric, pre-

venting the use of an FCIP link when an ISL is available.

•In-band management link over FCIP connections for the HP StorageWorks 400 Multi-protocol

Router allows a management station to communicate with a remote 400 Multi-protocol Router

through the GE ports. This allows a single management station located on the WAN side of the

400 Multi-protocol Router to communicate with the management interface on the CP for management

tasks such as firmware downloads, snmp polling, snmp traps, trouble shooting, and configuration.

Enhanced Native Connectivity with McDATA products

•Fabric OS 6.2 and M-EOS 9.9 now support Frame Redirection in McDATA Open Fabric Mode

(interopmode 3) fabrics. Frame Redirection zones must be created and activated from Fabric OS

platforms.

•Fabric OS platforms now support EX_Port connections to McDATA Open Fabric Mode Mi10ks

using the 239 DID setting.

Security enhancements

•Configurable stateless IPv6 auto-configuration support.

•IPSec with IPv6 support provides greater security for management ports and configurable security

policies for IPv4/6 addresses.

•A switch-wide policy requiring HBA authentication requires the FC-SP bit to be set in FLOGI. If the

bit is not set, the FLOGI is rejected and the port is disabled.

•A new warning for RADIUS login allows users to configure how many days in advance they should

be notified of password expiration.

•An LDAP enhancement adds the ability to provide an alternate UPN (userPrincipalName) to domain

authentication.

Contact your switch vendor regarding the use of other backup applications.

Optionally licensed software

The following are optionally licensed features in Fabric OS 6.2:

•Ports on Demand allows customers to instantly scale the fabric by provisioning additional ports

via license key upgrade (applies to select models of switches).

HP StorageWorks Fabric OS 6.2.0b release notes 5

•Extended Fabrics provides greater than 10 km of switched fabric connectivity at full bandwidth

over long distances (depending on platform, the distance can be up to 3000 km).

•ISL Trunking provides the ability to aggregate multiple physical links into one logical link for en-

hanced network performance and fault tolerance. This also includes Access Gateway ISL Trunking

on those products that support Access Gateway deployment.

•Advanced Performance Monitoring enables performance monitoring of networked storage resources.

This license includes the TopTalkers feature.

•High Performance Extension over FCIP/FC (formerly known as FC-IP Services) for the HP Storage-

Works B-Series Multi-protocol Router blade and 400 Multi-protocol Router). This license key also

includes the FC-Fastwrite feature and IPsec capabilities.

•Accelerator for FICON license enables unique FICON emulation support for IBM’s Global Mirror

(formerly XRC) application (including Hitachi Data Systems HXRC and EMC’s XRC) as well as

Tape Pipelining for all FICON tape and virtual tape systems to significantly improve XRC and tape

backup/recovery performance over virtually unlimited distance for HP StorageWorks 400 Multi-

protocol Router and B-Series Multi-protocol Router blade.

•Fabric Watch monitors mission-critical switch operations. Fabric Watch now includes new Port

Fencing capabilities.

•The FICON Management Server (also known as CUP or Control Unit Port) enables host-control of

switches in Mainframe environments.

•ICLs, or Inter Chassis Links, provide dedicated high-bandwidth links between two HP StorageWorks

DC SAN Backbone Directors or DC04 SAN Director switch chassis, without consuming valuable

front-end 8G ports. Each DC Backbone Director/DC04 SAN Director must have the ICL license

installed in order to enable the ICL connections. (Available on the DC Backbone Director/DC04

SAN Director only)

•Adaptive Networking provides a rich framework of capability allowing a user to ensure high pri-

ority connections and obtain the network resources necessary for optimum performance, even in

congested environments. The QoS SID/DID Prioritization and Ingress Rate Limiting features are

the first components of this license, and are fully available on all 8G platforms.

•The Integrated Routing license allows ports in an HP StorageWorks DC SAN Backbone Director,

HP StorageWorks DC04 SAN Director, HP StorageWorks 8/80 SAN Switch, or HP StorageWorks

8/40 SAN Switch, to be configured as EX_ports supporting Fibre Channel Routing. This eliminates

the need to add an B-Series Multi-protocol Router blade or use the 400 Multi-protocol Router for

FCR purposes, and also provides double the bandwidth for each FCR connection (when connected

to another 8G-capable port).

•A Server Application Optimization license, introduced with Fabric OS 6.2, when deployed with

Server Adapters, optimizes overall application performance for physical servers and virtual machines

by extending virtual channels to the server infrastructure. Application specific traffic flows can be

configured, prioritized, and optimized throughout the entire data center infrastructure.

Included licensed software

The Enhanced Group Management license is included with all HP 8Gb switches. Enhanced Group

Management enables full management of the device in a datacenter fabric with deeper element

management functionality and greater management task aggregation throughout the environment.

This license is used in conjunction with Data Center Fabric Manager (DCFM) application software.

Temporary license support

Temporary licenses are not currently supported by HP.

Previously licensed software now part of base Fabric OS

The following capabilities are included as part of the base Fabric OS capability and no additional

purchase or licensing is necessary.

NOTE:

Advanced Zoning and Web Tools licenses are no longer necessary, beginning with Fabric OS 6.1.

These features are automatically enabled on all products running Fabric OS 6.1 or later

Supported switches

The following switches are supported with Fabric OS 6.2.0b:

•HP StorageWorks 4/8 and 4/16 SAN Switch

•HP StorageWorks 8/8 and 8/24 SAN Switch

•Brocade 4Gb SAN Switch for HP p-Class BladeSystem

•Brocade 4Gb SAN Switch for HP c-Class BladeSystem

•HP StorageWorks EVA4400 Embedded Switch Module

•HP StorageWorks 8Gb SAN Switch for HP BladeSystem c-Class

•HP StorageWorks SAN Switch 4/32

•HP StorageWorks 4/64 SAN Switch

•HP StorageWorks SAN Switch 4/32B

•HP StorageWorks 8/40 SAN Switch

•HP StorageWorks 8/80 SAN Switch

•HP StorageWorks Encryption SAN Switch

•HP StorageWorks 400 Multi-protocol Router

•HP StorageWorks 4/256 SAN Director

•HP StorageWorks DC SAN Backbone Director

•HP StorageWorks DC04 SAN Director

•HP DC Switch Encryption FC Blade

•HP StorageWorks 4/256 SAN Director 16 Port 4–Gb Blade

•HP StorageWorks 4/256 SAN Director 32 Port 4–Gb Blade

•HP StorageWorks 4/256 SAN Director 48 Port 4–Gb Blade

•HP StorageWorks Multiprotocol Router Blade

•HP StorageWorks B-Series iSCSI Director Blade

•HP StorageWorks SAN Director 16 Port 8–Gb FC Blade

•HP StorageWorks SAN Director 32 Port 8–Gb FC Blade

•HP StorageWorks SAN Director 48 Port 8–Gb FC Blade

•HP StorageWorks SAN Director 6 Port 10–Gb FC ISL Blade

Standards compliance

This software conforms to the Fibre Channel Standards in a manner consistent with accepted

engineering practices and procedures. In certain cases, HP might add proprietary supplemental

HP StorageWorks Fabric OS 6.2.0b release notes 7

functions to those specified in the standards. For a list of standards conformance, visit the following

HP Web site: http://www.hp.com.

Update recommendations

All products supported by Fabric OS 6.0.x can be upgraded to Fabric OS 6.2.0b. If applicable, HP

recommends that users upgrade to Fabric OS 6.2.0b as soon as possible to take advantage of the

latest fixes and features.

See Firmware upgrades and downgrades for further information.

Supersedes

Fabric OS 6.2.0a released in January, 2009.

New hardware support

Support for HP StorageWorks DC04 SAN Director Switch was introduced with Fabric OS 6.2.0a:

•Has 192 ports, 8 Gb/sec technology in an 8U chassis with horizontal slots (9U with standard

port side air flow kit)

•Supports HP StorageWorks SAN Director 16 Port 8Gb FC blade, SAN Director 32 Port 8Gb FC

blade, and SAN Director 48 Port 8Gb FC blade

•Supports all special purpose blades available for HP StorageWorks DC SAN Backbone Director

•Supports ICL connectivity to other HP StorageWorks DC04 SAN Director Switch or DC SAN

Backbone Director chassis

Fabric OS 6.2.0b introduces support for the HP StorageWorks Encryption SAN Switch and the HP

DC Switch Encryption FC Blade. The encryption switch provides:

•48 Gb/s of encryption processing power, upgradable to 96 Gb/s

•Industry standard AES-256 algorithms for data-at-rest encryption

•32 Fibre Channel ports, 8 Gb/s in 2U form factor

•Integration with HP StorageWorks Secure Key Manager (SKM)

The encryption blade provides 16 ports and is supported in the DC SAN Backbone and DC04 SAN

Directors.

NOTE:

The encryption switch and blade are unique products compared to standard Fibre Channel switches.

HP highly recommends that you read the

Fabric OS Encryption Administrator's Guide

before

configuring these products into any fabric.

Supported product models

The following product models can be upgraded to Fabric OS 6.2.0b:

•HP StorageWorks 4/8 SAN Switch and 4/16 SAN Switch (Brocade 200E)

•HP StorageWorks 4/64 SAN Switch (Brocade 4900)

•HP StorageWorks 400 Multi-protocol Router (Brocade 7500)

•HP StorageWorks 16 Port 4-Gb Blade (FC4-16)

•HP StorageWorks 32 Port 4-Gb Blade (FC4-32)

•B-Series MP Router Blade (Brocade FR4-18i Blade)

•HP StorageWorks 4/48 SAN Director Blade (FC4-48)

•HP StorageWorks SAN Switch 4/32 (Brocade 4100)

•HP StorageWorks 4/32B SAN Switch (Brocade 5000)

•HP StorageWorks 4/256 SAN Director (Brocade 48000)

•HP StorageWorks B-Series iSCSI Director Blade (Brocade FC4-16IP) compatible with the 4/256

SAN Director model only, not supported in the DC SAN Backbone Director or DC04 SAN Director

•Brocade 4-Gb SAN Switch for HP p-Class BladeSystem (Brocade 4012)

•Brocade 4-Gb SAN Switch for HP c-Class BladeSystem (Brocade 4024)

•Brocade 8–Gb SAN Switch for HP BladeSystem c-Class (Brocade 5480)

•HP StorageWorks DC SAN Backbone Director (Brocade DC Director Data Center Backbone)

•HP StorageWorks SAN Director 16 Port 8-Gb FC blade (Brocade FC8-16)

•HP StorageWorks SAN Director 32 Port 8-Gb FC blade (Brocade FC8-32)

•HP StorageWorks SAN Director 48 Port 8-Gb FC blade (Brocade FC8-48)

•HP StorageWorks SAN Director 6 Port 10-Gb FC ISL blade (Brocade FC10-6)

•HP StorageWorks EVA4400 embedded switch module (Brocade 5410)

•HP StorageWorks DC04 SAN Director

HP StorageWorks Fabric OS 6.2.0b release notes 9

Unsupported product models

The following product models cannot be upgraded to Fabric OS 6.2.0b:

•HP StorageWorks Core Switch 2/64, which operates with Fabric OS 5.0.x (Brocade 12000)

•HP StorageWorks SAN Director 2/128 (Brocade 24000)

•HP StorageWorks MSA SAN Switch 2/8, which operates with Fabric OS 3.2.x (Brocade 3000)

•HP StorageWorks SAN Switch 2/8V (Brocade 3250)

•HP StorageWorks SAN Switch 2/16V (Brocade 3850)

•HP StorageWorks SAN Switch 2/16, which operates with Fabric OS 3.2.x (Brocade 3800)

•HP StorageWorks SAN Switch 2/32 (Brocade 3900)

•HP StorageWorks Multi-protocol (MP) Router, which operates with XPath OS 7.4.x (Brocade

AP7420)

IMPORTANT:

Any enhancements for the models listed above will be delivered in Fabric OS 3.2.x, Fabric OS 5.x,

and XPath OS 7.4.x sustaining releases.

Devices supported

For a list of supported devices, see the HP website:

http://www.hp.com/go/san

Operating systems

For a list of operating systems, see the HP website:

http://www.hp.com/go/san

Access Gateway support

Access Gateway is supported with the following HP products only:

•Brocade 4-Gb SAN Switch for HP p-Class BladeSystem (Brocade 4012)

•Brocade 4-Gb SAN Switch for HP c-Class BladeSystem (Brocade 4024)

•HP StorageWorks 4/16 SAN Switch (Brocade 200E)

•HP StorageWorks 8/8 SAN Switch (Brocade 300)

•HP StorageWorks 8/24 SAN Switch (Brocade 300)

•HP StorageWorks 8/40 SAN Switch (Brocade 5100)

Otros manuales para StorageWorks 4/8 - SAN Switch

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Software de HP

HP HPE XP P9500 Manual de usuario

HP StorageWorks MSA 2/8 - SAN Switch Manual de usuario

HP Media Center m1000 - Desktop PC Guía de inicio rápido

HP HPE XP P9500 Guía de seguridad

HP Presario SG1100 - Desktop PC Manual de usuario

HP Data Protector A.06.11 Guía de configuración rápida

HP Brio 7100 Manual de usuario

HP StorageWorks 2/16 - SAN Switch Manual de instrucciones

HP Neoview SQL Manual de usuario

HP Rx2620-2 - Integrity - 0 MB RAM Manual de usuario

HP VL400 - Vectra - 64 MB RAM Manual de usuario

HP NAS 1200s Manual de instrucciones

HP Rx2620-2 - Integrity - 0 MB RAM Manual de usuario

HP StorageWorks SSL1016 Instrucciones de uso

HP T5145 - Thin Client - Tower Manual de usuario

HP Integrity rx2800 - i2 Manual de usuario

HP Compaq dc5750 MT Manual de usuario

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard... Manual de instrucciones

HP cc2300 Manual de usuario

HP C7791C - DesignJet 130 Color Inkjet Printer Guía de configuración

HP AB500A - Integrated Lights-Out Advanced Manual de usuario

HP AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS... Cómo utilizar

HP 348773-001 Manual de usuario

HP StorageWorks MSA 2/8 - SAN Switch Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario

Novell

Novell SP2 - S Manual de instrucciones