HP C8000 - Workstation - 0 MB RAM Manual de instrucciones

Release Notes for HP Common 3D Graphics for HP-UX 11.11 (June 2004)

on PA-RISC Based Systems (HP-UX 11.i version 1)

----------------------------------------------------------------------

Print Date: June 2004

FireGL is used under license and is a registered trademark or trademark of ATI

Technologies Inc. in the United States and other countries.

1. ANNOUNCEMENTS

These Release Notes contain information that is common to the Xlib and the

following 3D graphics APIs: HP OpenGL, Starbase, HP-PHIGS, and HP PEX. For

specific information on each API, see their respective Release Notes. The on-

line Release Notes for the 3D graphics APIs are:

Common:

/opt/graphics/common/11.00_Rel_Notes

HP PEX:

/opt/graphics/PEX5/11.00_Rel_Notes

/opt/graphics/PEX5/newconfig/opt/graphics/PEX5/11.00_Rel_Notes

Starbase:

/opt/graphics/starbase/11.00_Rel_Notes

/opt/graphics/starbase/newconfig/opt/graphics/starbase/11.00_Rel_Notes

HP-PHIGS:

/opt/graphics/phigs/11.00_Rel_Notes

/opt/graphics/phigs/newconfig/opt/graphics/phigs/11.00_Rel_Notes

HP OpenGL:

/opt/graphics/OpenGL/11.00_Rel_Notes

For additional information on each API, see the "Graphics Administration

Guide" which can be viewed at http://www.hp.com/support/workstation_manuals.

2. WHAT'S IN THIS VERSION?

The 3D graphics software released with the HP-UX 11.11 Operating Environment

June 2004 release is supported on B, C, and J-class workstations. The

following features are included with this release:

* Support for New Devices: ATI FireGL

X1 and ATI FireGL T2 (supported on

C8000 workstation only)

See the following documentation for more information:

* The "Addenda -- Additional Graphics Information" section of this document

* The Release Notes for your particular 3D graphics API

These documents can be viewed at http://www.hp.com/support/workstation_manuals.

3. KNOWN PROBLEMS AND WORKAROUNDS

N/A

4. COMPATIBILITY AND INSTALLATION REQUIREMENTS

Software Requirements

=====================

None.

Hardware Requirements

=====================

With this release, Hewlett-Packard 3D graphics APIs are supported with the

following new bit-mapped graphics devices:

* ATI FireGL X1 (3D API support is limited to OpenGL only)

* ATI FireGL T2 (3D API support is limited to OpenGL only)

For detailed information about supported graphics configurations - HP-UX

computers combined with bit-mapped graphics devices - consult the "Graphics

Administration Guide".

For Graphics Information

========================

Use the "graphinfo" command to obtain information about the bit-mapped

graphics device(s) attached to your B, C, and J-class workstations. It reports

the following types of information:

* name of device (for example: HP VISUALIZE-FXE, ATI Fire GL T2)

* device driver (for use with 3D APIs)

* frame buffer configuration

* hardware features (acceleration, hardware Z-buffer)

* additional information related to HP's 3D graphics APIs

For additional information about programming applications for these devices,

consult the documentation for the 3D graphics API that you are using.

Operating System Platform Requirements

======================================

None.

Disk Space Requirements

=======================

Use swinstall to determine necessary and available disk space for the 3D

graphics API you wish to install.

5. PATCHES AND FIXES IN THIS VERSION

N/A

6. SOFTWARE AVAILABILITY IN NATIVE LANGUAGES

Localization is not planned for any 3D graphics API or the corresponding

documentation with this release.

7. TRADEMARKS

N/A

8. ADDENDA -- ADDITIONAL GRAPHICS INFORMATION

Graphics APIs

=============

Hewlett-Packard supports the following 3D graphics application programming

interface (API) libraries for use with the HP-UX 11.11 (June, 2004) release:

HP OpenGL, HP PEXlib, HP-PHIGS, and Starbase. Note that the HP PEXlib, HP-

PHIGS, and Starbase APIs are not supported on the ATI FireGL X1 and ATI FireGL

T2. For information about enhancements and changes to the current version of

each API, consult the separate Release Notes document(s) as described in the

ANNOUNCEMENTS section of this document (the Release Notes file(s) for a

particular API will not be present if the associated optional product has not

been installed on your system).

ATI FireGL X1 and ATI FireGL T2 Information

===========================================

The ATI FireGL X1 graphics device is HP's high end 3D graphics product. The

ATI FireGL T2 graphics device is HP's mid-range 3D graphics product. These

devices are supported on the following HP workstations:

* C8000

For more information on these devices (including supported visuals and other

device attributes), refer to the following documentation which can be found by

visiting HP’s website at http://www.hp.com/support/workstation_manuals:

* "Graphics Administration Guide"

* "OpenGL Implementation Guide"

Discontinuance Information

==========================

Hewlett-Packard evaluates the capabilities and device support of HP-UX on an

ongoing basis. There are no graphics devices being discontinued with this

release.

Threads Information

===================

HP's 3D graphics APIs (HP OpenGL, HP PEX, HP-PHIGS, and Starbase) all support

Level 1b threads for this release. This means HP's 3D graphics APIs can be

used in a threaded application, but all 3D graphics calls must reside in a

single thread. Other threads can be used for computations, etc.

Note that using OpenGL graphics in a Kernel threaded application requires that

the application link with libpthread.sl (not the archived version,

libpthread.a). Also note that OpenGL libraries are not cancel safe or fork

safe.

For more information on using threads, see the following documentation:

* The devresource.hp.com web site (see "Threads and Multiprocessing")

* The "OpenGL Programming Guide"

* The "OpenGL Reference Manual"

* "Threadtime" by S. Norton and M. Dipasquale

Additions to X11 Support

========================

HP’s Xfree86-based Xserver supports the ATI FireGL X1 and ATI FireGL T2

graphics devices. For more details on the features and capabilities of this

Xserver, please refer to the "Graphics Administration Guide" document.

Otros manuales para C8000 - Workstation - 0 MB RAM

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Software de HP

HP Integrity BL860c Manual de usuario

HP DDL D40 Manual de usuario

HP StorageWorks 2/16 - SAN Switch Manual de usuario

HP Integrity rx1600 Guía de referencia rápida

HP Rx2620-2 - Integrity - 0 MB RAM Manual de usuario

HP HPE XP P9500 Manual de instrucciones

HP ProCurve 1600M Manual de usuario

HP 1032 Manual de usuario

HP StorageWorks All-in-One SB600c - Storage... Manual de usuario

HP FTAM/9000 Manual de usuario

HP t5565 - Thin Client Manual de servicio

HP Kayak XU700 Manual de usuario

HP 742n - Pavilion - 512 MB RAM Manual de usuario

HP Brio BA200 Manual de usuario

HP 742n - Pavilion - 512 MB RAM Instrucciones de instalación y funcionamiento

HP 4X - DDR InfiniBand Mezzanine HCA Guía

HP ProLiant BL620c G7 Instrucciones de instalación y funcionamiento

HP 3000 - 37XE System Manual de instrucciones

HP Pro 3130 MT Manual de usuario

HP Integrity BL860c Manual de instrucciones

HP StorageWorks 2/64 - Core Switch Manual de servicio

HP StorageWorks MSA 2/8 - SAN Switch Manual de usuario

HP StorageWorks 1510i - Modular Smart Array Manual de usuario

HP ProLiant DL320e Manual de usuario

Manuales populares de Software de otras marcas

COMPRO

COMPRO COMPROFM Manual de usuario

Muratec

Muratec OFFICEBRIDGE ONLINE Manual de usuario

Oracle

Oracle Contact Center Anywhere 8.1 Manual de usuario

Adobe

Adobe 65007312 - Photoshop Lightroom Manual

Avaya

Avaya NULL One-X for RIM Blackberry Manual de usuario

PS Audio

PS Audio PowerPlay Manual del propietario

Brady

Brady LOCKOUT PRO 3.0 Manual de servicio

Avaya

Avaya Interaction Center Manual de usuario

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manual

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manual de usuario

Oracle

Oracle Application 9i Manual de usuario

Acer

Acer RDM Manual de usuario

Canon

Canon Vixia HF21 Manual de usuario

Canon

Canon ZR950 Manual de usuario

Samsung

Samsung Auto Backup Manual de usuario

Polycom

Polycom Vortex EF2201 Instrucciones de instalación y funcionamiento

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manual de usuario

Novell

Novell SP2 - S Manual de instrucciones