HP ProLiant ML30 Gen10 Manual de usuario

HPE ProLiant ML30 Gen10 Server User GuideHPE ProLiant ML30 Gen10 Server User Guide

Part Number: 30-2564CC28-005

Published: June 2021

Edition: 5

HPE ProLiant ML30 Gen10 Server HPE ProLiant ML30 Gen10 Server User GuideUser Guide

AbstractAbstract

This document is for the person who installs, administers, and troubleshoots servers and storage systems. Hewlett Packard Enterprise

assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy

levels, and are familiar with the weight and stability precautions for rack installations.

Part Number: 30-2564CC28-005

Published: June 2021

Edition: 5

NoticesNotices

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and

services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as

constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained

herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or copying. Consistent with FAR

12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are

licensed to the U.S. Government under vendor's standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control over and is

not responsible for information outside the Hewlett Packard Enterprise website.

AcknowledgmentsAcknowledgments

Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

Microsoft , Windows , and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States

and/or other countries.

Red Hat Enterprise Linux are registered trademarks of Red Hat, Inc. or its subsidiaries in the United States and other countries.

VMware ESXi and VMware vSphere are registered trademarks or trademarks of VMware, Inc. and its subsidiaries in the United States and

other jurisdictions.

All third-party marks are property of their respective owners.

® ® ®

® ®

™ ®

Table of contentsTable of contents
Component identification
1 Front panel components
2 Front panel LEDs and button
2.1 Front panel LED power fault codes
3 Rear panel components
4 Rear panel LEDs
5 System board components
5.1 System maintenance switch descriptions
5.2 DIMM label identification
5.3 DIMM slot locations
5.4 PCI expansion slot definitions
6 Drive LEDs and buttons
6.1 Low-profile LFF drive LED definitions
6.2 Smart Carrier (SC) drive LED definitions
7 Drive bay numbering
8 Fan numbering
8.1 Fan mode behavior
9 Media device screws
Operations
1 Power up the server
2 Power down the server
3 Extend the server from the rack
4 Remove the server from the rack
5 Slide the server into the rack
6 Remove the front bezel
7 Install the front bezel
8 Remove the access panel
9 Install the access panel
10 Remove the air baffle
11 Install the air baffle
12 Remove the PCI slot blank retainer
13 Remove the PCI slot blank
14 Position the tower server for hardware configuration
15 Position the tower server for operation
Setup
1 Initial system installation
1.1 HPE Installation Service
1.2 Setting up the server
2 Operational requirements
2.1 Space and airflow requirements
2.2 Temperature requirements
2.3 Power requirements

2.4 Electrical grounding requirements
3 Rack warnings and cautions
4 Server warnings and cautions
5 Electrostatic discharge
6 POST screen options
Hardware options installation
1 Hardware option installation guidelines
2 Tower to rack conversion kit
2.1 Installing the tower-to-rack conversion kit
2.2 Preparing the server for rack installation
2.3 Installing the rack rails and server tray
2.4 Installing the server on the tray
3 Installing the PCI fan and air baffle options
4 Power supply options
4.1 Hot-plug power supply calculations
4.2 Power supply warnings and cautions
4.3 Flexible Slot (Redundant) power supply enablement option
4.3.1 Installing a Flexible Slot (Redundant) power supply enablement option
5 Drive options
5.1 Drive installation guidelines
5.2 Drive support information
5.3 Installing an LFF non-hot-plug drive in the drive cage
5.4 Installing an LFF hot-plug drive
5.5 Installing an SFF hot-plug drive
6 Media device options
6.1 Installing a SAS LTO tape drive
6.2 Installing a USB RDX drive
6.3 Installing an optical drive
6.4 Installing an LFF non-hot-plug drive in the media drive bay
7 Memory options
7.1 DIMM population information
7.2 Installing a DIMM
8 M.2 SSD/dedicated iLO/serial port enablement option
8.1 M.2 SSD/dedicated iLO/serial port enablement option components
8.2 Installing the M.2 SSD/dedicated iLO/serial port enablement board
8.3 Installing the serial port cable
8.4 Enabling the dedicated iLO management module
9 M.2 SSD option
9.1 Installing an M.2 NVMe SSD on the system board
9.2 Installing an M.2 NVMe SSD on an M.2 SSD/dedicated iLO/serial port enablement board
10 Storage controller options
10.1 Installing a Smart Array standup storage controller
11 Energy pack options
11.1 HPE Smart Storage Battery

11.2 HPE Smart Storage Hybrid Capacitor
11.2.1 Minimum firmware versions
11.3 Installing an energy pack
12 Expansion board options
12.1 Expansion board thermal requirement
12.2 Installing an expansion board
13 Internal USB device option
13.1 Installing an internal USB device
14 HPE Trusted Platform Module 2.0 Gen10 option
14.1 Overview
14.2 HPE Trusted Platform Module 2.0 guidelines
14.3 Installing and enabling the HPE TPM 2.0 Gen10 option
14.3.1 Installing the Trusted Platform Module board
14.3.1.1 Preparing the server for installation
14.3.1.2 Installing the TPM board and cover
14.3.1.3 Preparing the server for operation
14.3.2 Enabling the Trusted Platform Module
14.3.2.1 Enabling the Trusted Platform Module as TPM 2.0
14.3.2.2 Enabling the Trusted Platform Module as TPM 1.2
14.3.3 Retaining the BitLocker recovery key/password
Cabling
1 Cabling guidelines
2 Storage cabling
2.1 LFF non-hot-plug drive cabling from the media bay
2.2 LFF non-hot-plug drive cabling from the drive cage
2.3 LFF hot-plug drive cabling
2.4 SFF hot-plug drive cabling
3 Energy pack cabling
4 Controller backup power cabling
5 Media device cabling
5.1 SATA optical drive cabling
5.2 SAS LTO tape drive cabling
5.3 USB RDX drive cabling
6 Serial port cabling
7 Fan cabling
8 Power supply cabling
9 Front I/O cabling
10 Front USB cabling
Software and configuration utilities
1 Server mode
2 Product QuickSpecs
3 Active Health System Viewer
3.1 Active Health System
3.1.1 Active Health System data collection

3.1.2 Active Health System Log
4 HPE iLO 5
4.1 iLO Federation
4.2 iLO Service Port
4.3 iLO RESTful API
4.4 RESTful Interface Tool
4.5 iLO Amplifier Pack
5 Integrated Management Log
6 Intelligent Provisioning
6.1 Intelligent Provisioning operation
7 Management security
8 Scripting Toolkit for Windows and Linux
9 UEFI System Utilities
9.1 Selecting the boot mode
9.2 Secure Boot
9.3 Launching the Embedded UEFI Shell
10 HPE Smart Storage Administrator
11 HPE InfoSight for servers
12 USB support
12.1 External USB functionality
13 Redundant ROM support
13.1 Safety and security benefits
14 Keeping the system current
14.1 Updating firmware or system ROM
14.1.1 Service Pack for ProLiant
14.1.1.1 Smart Update Manager
14.1.1.2 Integrated Smart Update Tools
14.1.2 Updating firmware from the System Utilities
14.1.3 Updating the firmware from the UEFI Embedded Shell
14.1.4 Online Flash components
14.2 Drivers
14.3 Software and firmware
14.4 Operating system version support
14.5 HPE Pointnext Portfolio
14.6 Proactive notifications
Troubleshooting
1 NMI functionality
2 Troubleshooting resources
System battery replacement
1 System battery information
2 Removing and replacing the system battery
Safety, warranty, and regulatory information
1 Regulatory information
1.1 Notices for Eurasian Economic Union

1.2 Turkey RoHS material content declaration
1.3 Ukraine RoHS material content declaration
1.4 GS Gloss declaration
2 Warranty information
Specifications
1 Environmental specifications
2 Server specifications
3 Power supply specifications
3.1 HPE 350W E-star 1.0 Non-hot-plug Power Supply (85% efficiency)
3.2 HPE 350W Gold Non-hot-plug Power Supply (92% efficiency)
3.3 HPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
Websites
Support and other resources
1 Accessing Hewlett Packard Enterprise Support
2 ClearCARE technical support
3 Accessing updates
4 Customer self repair
5 Remote support
6 Documentation feedback

Component identificationComponent identification

Component identification 8

Front panel componentsFront panel components

ItemItem DescriptionDescription

1 USB 3.0 port

2 USB 2.0 port

3 Drive cage bay

4 PCI fan (optional)

5 Media bay 2

6 Media bay 1

Front panel components 9

Front panel LEDs and buttonFront panel LEDs and button

ItemItem DescriptionDescription StatusStatus DefinitionDefinition

1 Power On/Standby button and system power

LED

Solid green System on

Flashing green Performing power-on

sequence

Solid amber System in standby

Off No power present

2 Health LED Solid green Normal

Flashing green iLO rebooting

Flashing amber System degraded

Flashing red System critical

When the LEDs described in this table flash simultaneously, a power fault has occurred. For more information, see

Front panel LED power fault codes

Front panel LEDs and button 10

Tabla de contenidos

Otros manuales de Servidor de almacenamiento en red de HP

HP AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS... Cómo utilizar

HP J3278B - SureStore CD-ROM Server/Tower 7 NAS... Manual de usuario

HP J3278B - SureStore CD-ROM Server/Tower 7 NAS... Manual de instrucciones

HP StorageWorks NAS e7000 v2 Manual de usuario

HP StorageWorks P4000 Series Guía de referencia rápida

HP Ultrium 232i Manual de usuario

HP AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS... Cómo utilizar

HP EX495 - 1.5TB Mediasmart Home Server Instrucciones de instalación

HP StorageWorks E Series Manual de usuario

HP ProLiant ML110 G5 Manual de usuario

HP ProLiant ML310 Generation 5p Manual de usuario

HP NetStorage 6000 Manual de uso y cuidado

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard... Manual de usuario

HP 3PAR StoreServ 7000 Manual de usuario

HP J3278B - SureStore CD-ROM Server/Tower 7 NAS... Manual de usuario

HP NetStorage 6000 Manual de usuario

HP NetStorage 6000 Manual de instrucciones

HP StorageWorks NAS e7000 v2 Manual de usuario

HP StorageWorks NAS 500s Manual de servicio

HP 3PAR StoreServ 7000 Manual de usuario

HP J3278B - SureStore CD-ROM Server/Tower 7 NAS... Manual de usuario

HP ProLiant DL100 G2 DPSS Manual de usuario

HP AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS... Manual de usuario

Manuales populares de Servidor de almacenamiento en red de otras marcas

Seagate

Seagate U10 ST320423A Manual de usuario

Synology

Synology RackStation RS816 Manual

D-Link

D-Link ShareCenter Pro DNS-1200-05 Manual de usuario

Avid Technology

Avid Technology VideoRAID ST Guía de seguridad

Western Digital

Western Digital My Cloud Home Duo Manual de usuario

PrimeArray

PrimeArray 4xxx Manual de usuario

Buffalo

Buffalo TeraStation WSS WSH5010N6 Manual de usuario

Planex

Planex MZK-NAS01SG Manual de usuario

Intel

Intel SS4000-E - Entry Storage System NAS Server Manual de usuario

Synology

Synology RS2212+ Manual de usuario

Allnet

Allnet ALL69000 Manual de usuario

Adaptec

Adaptec 5325301580 Manual de usuario

Motorola

Motorola EXORdisk II Manual de usuario

Sony

Sony XDAAI1PK Manual de usuario

Cisco

Cisco Linksys NAS200 Instrucciones de funcionamiento originales

Sans Digital

Sans Digital MR4UT6G Manual de usuario

AIC

AIC FB128-LX Manual de usuario

Dell

Dell PowerVault NX3500 Instrucciones de uso