HP Aruba 640 Instrucciones de montaje

EL-MF877-00 Page 1

Template Revision A

Product End-of-Life Disassembly Instructions

Product Category: Networking Equipment

Marketing Name / Model

[List multiple models if applicable.]

HP 640 Redundant/External PS Shelf (J9805A)

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description

Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA)

With a surface greater than 10 sq cm

1 in product, 1 in power adapter

Batteries

All types including standard alkaline and lithium coin

or button style batteries

Mercury-containing components

For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm

Includes background illuminated displays with gas

discharge lamps

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent

chambers, and service stations.

Components and waste containing asbestos

Components, parts and materials containing

refractory ceramic fibers

Components, parts and materials containing

radioactive substances

EL-MF877-00 Page 2

Template Revision A

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Torx Driver

# 10

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Remove black flat-head screws securing cover, 3 each side, 6 at top rear, - 12 screws total.

2. Remove cover by lifting rear of cover and pulling towards back of unit to disengage lip. Cover is painted zinc-plated

steel.

3. Remove 12 screws holding metal keying mechanisms with springs. Each of the 3 mechanisms is secured by 4

screws. All parts of these mechanisms are steel.

4. Remove 8 screws holding rear connector housings in place. Each of the 4 connector housings is held in place with 2

screws.

5. Remove the 4 connection subassemblies by first pulling the edge-connector end out of its connector then lifting up and

to the rear of the unit to free each subassembly.

6. For each of the connection subassemblies remove the one screw holding the connector housing to the PCB. Connector

housings are aluminum. The 2 connectors on each of the 4 connection PCBs can be pried out if needed since these

are press-fit connectors.

7. Remove the 8 screws that secure the main PCA. Lift PCA at rear and move slightly backwards to disengage LED light

pipe. Light pipe is easily removed by hand.

8. The remaining chassis base is one piece and consists of painted zinc-plated steel.

10.

11.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Hardware de red de HP

HP X5000 G2 Manual de servicio

HP 205H-MNT2 Manual de usuario

HP AdvanceStack Hub-8U J2610B Manual de instalación y funcionamiento

HP ProCurve Networking J8451A Manual de usuario

HP Bc1500 - BladeSystem - Blade PC Manual de usuario

HP Edgeline EL1000 Manual de usuario

HP StorageWorks T5521A Manual

HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS... Cómo utilizar

HP JG602A Manual de usuario

HP Wireless LAN 802.11b/g Device WN4201B Manual de usuario

HP J9666A Manual de usuario

HP zl2 Manual de usuario

HP X1600 - StorageWorks Network Storage System 5.4TB SAS Model NAS... Manual de usuario

HP ProLiant DL980 G7 Guía de referencia rápida

HP StoreEasy 3000 Manual de instrucciones

HP 85027A Manual de servicio

HP Surestore Disk Array 12h - And FC60 Manual de usuario

HP StorageWorks x9300 Manual de servicio

HP X1800sb G2 Instrucciones de uso

HP AT084A Guía de instalación

HP StorageWorks 1/8 Tape Autoloader Manual de usuario

HP SL500 (M852x) Manual de usuario

HP UPS Network Module Manual de usuario

HP VMA Series Hoja de instrucciones

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario