Honeywell VisionPRO IAQ Manual de usuario

VisionPRO®IAQ

Total Home Comfort System

Operating Manual

Mode d’emploi

Manual de Uso

Read and save these instructions

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502

BE CAREFUL! Never use sharp instruments, such as a pencil

or pen, to press touchscreen keys. To prevent damage to the

thermostat, always press keys with your fingertip.

® U.S. Registered Trademark.

US Patent No. 6,208,263; 6,373,376; 6,448,901; 6,926,076;

D509151; H25192; H25193 and other patents pending.

VisionPRO®IAQ

About your new thermostat

Programming at a glance..................2

Quick reference to controls ..............3

Quick reference to status display ....4

Programming & Operation

Clock setting......................................5

Fan setting ........................................6

System setting....................................7

Energy Star settings ..........................8

Using program schedules ................9

Program schedule overrides ..........10

Vacation hold ..................................12

Special features ..............................13

Screen lock ......................................14

Screen cleaning ..............................15

Optional remote sensors ................16

Humidity control ..............................17

Ventilation control............................19

Appendices

Advanced functions ........................20

In case of difficulty ..........................27

Limited warranty..............................29

Table of contents

This thermostat is ready to go!

Your new thermostat is pre-

programmed and ready to go.

See page 2 to check settings.

CAUTION: EQUIPMENT DAMAGE

HAZARD. To prevent possible

compressor damage, do not operate

cooling system when outdoor

temperature is below 50°F (10°C).

Operating Manual

About your new thermostat

Your new thermostat is pre-programmed and ready to go. Just set the time

and day. Then check the settings below and change if needed:

1Set clock......................................................................................See page 5

2Select fan setting: Preset to Auto ............................................See page 6

3Select system setting: Preset to Heat ....................................See page 7

4Program schedules: Preset to energy-saving levels

while you’re at work or asleep (assumes you

wake at 6 am, leave at 8 am, return at 6 pm

and go to bed at 10 pm) ......................................................See pages 8-11

5 Set humification, dehumidification

& ventilation controls, if applicable....................................See pages 17-19

ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,

and manually adjust the temperature (see pages 10-11).

VisionPRO®IAQ

MON TUE WED THU FRI SAT SUN

HEAT

SYSTEM

SCHED HOLD CLOCK SCREEN MORE

AUTO

FAN

OK TO PICK MULTIPLE DAYS

Inside

70 Set To

Following

Schedule

6:01

Quick reference to controls

Press day(s) to set program schedule (see page 9)

Press to select fan

operation (see page 6)

Press to adjust

temperature settings

(see pages 9-11)

Press to set program

schedule (see page 9)

Press to override

program schedule

(see pages 10-11)

Press to set clock

(see page 5)

Press to lock keypad for 30

seconds to clean screen

(see page 14).

Press to select system

type (see page 7)

Press for more options

WED

HEAT

SYSTEM

SCHED HOLD CLOCK SCREEN MORE

AUTO

FAN

Inside

70 Set To

Following

Schedule

Recovery

Humidity

6:01

Operating Manual

Quick reference to status display

Current inside temperature Current day of week Temperature setting

System setting

Fan setting Adaptive Intelligent

Recovery in effect

(see page 13)

Inside humidity

(If an outdoor sensor is

installed, the outdoor

temperature is shown

instead of the humidity

level. Press MMOORREEto dis-

play the humidity level.)

Program schedule on

(does not display

when off)

Current time

Other display messages:

•Cool On: Cooling system is activated

•Heat On: Heating system is activated

•Aux Heat On: Auxiliary heating system is activated

•Wait: Compressor protection activated (see page 13)

•Screen Locked: See page 26 to unlock

55%

VisionPRO®IAQ

Clock setting

To set the current time display,

press clock, then press ▲or ▼

to adjust the time. Press and

hold ▲or ▼to advance the time

more quickly.

Press DDOONNEEto save & exit (or press

CCAANNCCEELLto exit without changing

the time).

Note: The real-time clock should never

require adjustment since it automatically

updates for daylight savings time, and

stores all date/time information.

Note: To change the current week day

display, see page 21.

Press CCLLOOCCKK

Adjust time, then press DDOONNEE

SCHED HOLD CLOCK SCREEN MORE

6:01

DONE CANCEL

6:02

Operating Manual

Fan setting

Press FFAANNto select fan operation:

•On: Fan is always on.

•Auto: Fan runs only when the heating

or cooling system is on.

•Circ: Fan runs randomly, about 35%

of the time. Use this setting for

improved air circulation, or for more

efficient air cleaning, if you do not

want the fan to run all the time.

You can press FFAANNat any time to override

the fan settings you’ve programmed for

different time periods (see page 9). If you

select On or Circ, the setting you select

will remain active until you press FFAANN

again to select Auto.

WED

HEAT

SYSTEM

SCHED HOLD CLOCK SCREEN MORE

AUTO

FAN

Inside

70 Set To

Following

Schedule

6:01

Press FFAANN

VisionPRO®IAQ

System setting

Press the SSYYSSTTEEMMbutton to select:

•Heat: Thermostat controls only the

heating system.

•Cool: Thermostat controls only the

cooling system.

•Off: Heating and cooling systems are

off.

•Auto: Thermostat automatically

selects heating or cooling depending

on the indoor temperature.

•Em Heat (only for heat pumps with

auxiliary heat): Thermostat controls

Auxiliary Heat. Compressor is not used.

WED

HEAT

SYSTEM

SCHED HOLD CLOCK SCREEN MORE

AUTO

FAN

Inside

70 Set To

Following

Schedule

6:01

Press SSYYSSTTEEMM

Operating Manual

EnergyStar®settings for maximum cost savings

It’s easy to program your system for maximum energy savings. You can

program four time periods each day, with different settings for each day.

This thermostat is pre-set to use EnergyStar®program settings. We recom-

mend these settings, since they can reduce your heating/cooling expenses by

as much as 33%. (See next page to adjust times and temperatures of each

time period.)

Heat (Mon-Fri) Cool (Mon-Fri) Heat (Sat-Sun) Cool (Sat-Sun)

Wake

(6:00 am)

Leave

(8:00 am)

Return

(6:00 pm)

Sleep

(10:00 pm)

[Or cancel period]

Otros manuales para VisionPRO IAQ

Tabla de contenidos

Idiomas:

Otros manuales de Termostato de Honeywell

Honeywell

Honeywell T8611G Chmnothern IV Manual de usuario

Honeywell

Honeywell RTH2300 series Manual de usuario

Honeywell

Honeywell Lyric T5 Wi-Fi Manual de usuario

Honeywell

Honeywell 8162 Manual de usuario

Honeywell

Honeywell PRO TH4110B Manual de usuario

Honeywell

Honeywell RTH221 Series Manual de usuario

Honeywell

Honeywell YRTH7500D1009 - 5 Day Program Thermostat Manual de usuario

Honeywell

Honeywell VisionPRO Wi-Fi TH8320WF Manual de usuario

Honeywell

Honeywell Lyric Manual de usuario

Honeywell

Honeywell RTH111 series Manual de usuario

Honeywell

Honeywell RTH2310 Manual de usuario

Honeywell

Honeywell PRO TH2000DH Series Manual de usuario

Honeywell

Honeywell RTH7400 series Manual de usuario

Honeywell

Honeywell RTH111 series Manual de usuario

Honeywell

Honeywell T6 Pro Hydronic Manual de usuario

Honeywell

Honeywell RTH2300B1038/E1 Manual de usuario

Honeywell

Honeywell RTH7000 Manual de usuario

Honeywell

Honeywell RTH6500WF Wi-Fi Series Manual de usuario

Honeywell

Honeywell Honeywell Thermostat PRO TH3000 Series Manual de usuario

Honeywell

Honeywell PRO 3000 Series Manual de usuario

Honeywell

Honeywell RTH1100 series Manual de usuario

Honeywell

Honeywell EConnect TL9160AR Manual de usuario

Honeywell

Honeywell Lyric Manual de usuario

Honeywell

Honeywell VisionPRO TB8220 Manual de usuario

Manuales populares de Termostato de otras marcas

EWELLY

EWELLY EW-181 Manual de usuario

Prolon

Prolon T1100 Instrucciones de instalación

Computherm

Computherm Q20 Manual de usuario

Heatmiser

Heatmiser neoStat Manual de usuario

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manual de usuario

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manual de usuario

Saswell

Saswell SAS920XWHB-7-S-RF Guía

Aircalo

Aircalo TFP1-ET85P2 Manual de usuario

Carrier

Carrier DEBONAIR 33CS Manual de usuario

Lennox

Lennox iHarmony Zone Thermostat Instrucciones de montaje

Gemtech

Gemtech GT7000 Manual de instrucciones

Rollei

Rollei Smartes 45000 Manual de usuario

Sinope

Sinope TH1300RF Manual de usuario

NuTone

NuTone NTBZ48 Instrucciones de funcionamiento originales

Stelpro

Stelpro MAESTRO ASMT402AD Manual de usuario

Aube Technologies

Aube Technologies TH305 Manual de usuario

Powtier Controls

Powtier Controls 505MST Manual de usuario

Kanmor

Kanmor Zone Control 369e Manual de usuario