Hisense RF702N4IS1 Instrucciones de montaje

Contents

Safety and warning information2

Installing your new appliance 8

Description of the appliance14

Display controls15

Using your appliance 17

leaning and care18

Helpful hints and tips20

Troubleshooting21

Disposal of the appliance23

This appliance is in accordance with the following EU guidelines: LVD

2014/35/EU and EM 2014/30/EU and 2009/125/E and E .1060/2010 and

2002/96/E .

Safety and warning information

For your safety and correct

usage, before installing and

first using the appliance, read

this user manual carefully,

including its hints and

warnings. To avoid

unnecessary mistakes and

accidents, it is important to

make sure that all people

using the appliance are

thoroughly familiar with its

operation and safety features.

Save these instructions and

be sure that they remain with

the appliance if it is moved or

sold, so that anyone using it

throughout its life will be

properly informed on usage

and safety notices.

For the safety of life and

property, keep the

precautions of these user's

instructions as the

manufacturer is not

responsible for damages

caused by omission.

Safety for children and others

who are vulnerable

This appliance can be

used by children aged from

8 years and above, and

persons with reduced

physical, sensory or mental

capabilities or lack of

experience and knowledge

if they have been given

supervision or instruction

concerning use of the

appliance in a safe way

and understand the

hazards involved. hildren

shall not play with the

appliance. leaning and

user maintenance shall not

be made by children

without supervision.

Keep all packaging away

from children as there is risk

of suffocation

If you are discarding the

appliance, pull the plug out

of the socket, cut the

connection cable (as close

to the appliance as you can)

and remove the door to

prevent children playing

from suffering an electric

shock or from closing

themselves inside.

If this appliance, featuring a

magnetic door seals, is to

replace an older appliance

having a spring lock (latch)

on the door or lid, be sure to

make the spring lock

unusable before you discard

the old appliance. This will

prevent it from becoming a

death trap for a child

General safety

WARNING —This

appliance is intended

to be used in households

and similar applications

such as

-staff kitchen areas in shops,

offices and other working

environments;

-farm houses and by clients

in hotels, motels and other

residential type

environments;

-bed and breakfast type

environments;

-catering and similar

nonretail applications

WARNING —The water

supply line should only be

connected to a potable water

supply.

WARNING — Do not store

explosive substances such

as aerosol cans with a

flammable propellant in this

appliance.

WARNING — If the supply

cord is damaged, it must be

replaced by a qualified

electrician in order to avoid

the risk of electric shock.

WARNING — Keep

ventilation openings in the

appliance enclosure or in

any built-in structure clear of

obstruction.

WARNING — Do not use

mechanical devices or other

means to accelerate the

defrosting process, other

than those recommended by

the manufacturer.

WARNING — Do not

damage the refrigerant

circuit.

WARNING — Do not use

electrical appliances inside

the food storage

compartments of the

appliance, unless they are of

the type recommended by

the manufacturer.

WARNING — The

refrigerant and insulation are

flammable. When disposing

of the appliance, do so only

at an authorized waste

disposal center. Do not

expose to flame.

Refrigerant

The refrigerant isobutene

(R600a) is contained within

the refrigerant circuit of the

appliance, a natural gas with

a high level of environmental

compatibility, which is

nevertheless flammable.

During transportation and

installation of the appliance,

ensure that none of the

components of the refrigerant

circuit becomes damaged.

The refrigerant (R600a) is

flammable.

WARNING — Refrigerators

contain refrigerant and

gases in the insulation.

Refrigerant and gases must

be disposed of

professionally as they may

cause eye injuries or ignition.

Ensure that tubing of the

refrigerant circuit is not

damage prior to proper

disposal.

Caution: risk of fire

If the refrigerant circuit is

damaged:

-Avoid naked flames and

sources of ignition.

-Thoroughly ventilate the

room in which the appliance

is situated.

It is dangerous to alter the

specifications or modify this

product in any way.

Any damage to the cord may

cause a shortcircuit, fire,

and/or electric shock.

Electrical safety

1. The power cord must not

be lengthened.

2. Make sure that the power

plug is not crushed or

damaged. A crushed or

damaged power plug may

overheat and cause a fire.

3. Make sure that you can

access the main plug of the

appliance.

4. Do not pull the main

cable.

5. If the power plug socket

is loose, do not insert the

power plug. There is a risk

of electric shock or fire.

6. You must not operate the

appliance without the

interior lighting lamp cover.

7. The fridge is only supplied

with power supply of single

phase alternating current of

220 ~ 240 V/50Hz. If

fluctuation of voltage in the

district of user is so large

that the voltage exceeds the

above scope, for safety sake,

be sure to apply A. .

Automatic voltage regulator

of more than 350W to the

fridge. The fridge must

employ a special power

socket instead of common

one with other electric

appliances. Its plug must

match the socket with

ground wire.

Daily use

Do not store flammable

gas or liquids in the

appliance. There is a risk of

an explosion.

Do not operate any

electrical appliances in the

appliance (e.g. electric ice

cream makers, mixers etc.).

When unplugging always

pull the plug from the mains

socket, do not pull on the

cable.

Do not place hot items near

the plastic components of

the fridge.

Do not place food products

directly against the air outlet

on the rear wall.

Store pre-packed frozen

food in accordance with the

frozen food manufacture’s

instructions.

The manufactures storage

recommendations should be

strictly adhered to. Refer to

relevant instructions for

storage.

Do not place carbonated or

fizzy drinks in the freeze

compartment as it creates

pressure on the container,

which may cause it to

explode, resulting in

damage to the appliance.

Frozen food can cause frost

burns if consumed straight

from the freezer

compartment.

Do not place the appliance

in direct sunlight.

Keep burning candles,

lamps and other items with

naked flames away from the

appliance so that do not set

the appliance on fire.

The appliance is intended

for keeping food and/or

beverages in normal

households as explained in

this instruction booklet The

appliance is heavy. are

should be taken when

moving it.

Do not remove or touch

items from the freezer

compartment if your hands

are damp/wet, as this could

cause skin abrasions or

frost/freezer burns.

Never use the base,

drawers, doors etc. to stand

on or as supports.

Frozen food must not be

refrozen once it has been

thawed out.

Do not consume ice

popsicles or ice cubes

straight from the freezer as

this can cause freezer burn

to the mouth and lips.

To avoid items falling and

causing injury or damage to

the appliance, do not

overload the door racks or

put too much food in the

crisper drawers.

Caution!

Care and cleaning

Before maintenance, switch

off the appliance and

disconnect the mains plug

from the mains socket.

Do not clean the appliance

with metal objects, steam

cleaner, ethereal oils,

organic solvents or abrasive

cleansers.

Do not use sharp objects to

remove frost from the

appliance. Use a plastic

scraper.

Installation im ortant!

For electrical connection

carefully, follow the

instructions given in this

manual.

Unpack the appliance and

check if there are damages

on it. Do not connect the

appliance if it is damaged.

Report possible damages

immediately to the place you

bought it. In this case retain

packing.

It is advisable to wait at least

four hours before connecting

the appliance to allow the oil

to flow back in the

compressor.

Adequate air circulation

should be allowed around

the appliance reducing the

risk of overheating. To

achieve sufficient ventilation,

follow the instructions

relevant to installation.

Wherever possible the back

of the product should not be

close to a wall to avoid

touching or catching warm

parts (compressor,

condenser) to prevent the

risk of a fire, follow the

instructions relevant to

installation

The appliance must not be

locate close to radiators or

cookers.

Make sure that the mains

plug is accessible after the

installation of the appliance.

Service

Any electrical work required

to do the servicing of the

appliance should be carried

out by qualified electrician or

competent person. This

product must be serviced by

an authorized Serviced

enter, and only genuine

spare parts must be used.

Installing your new a liance

Before using the appliance for the first

time, you should be informed of the

following tips.

Warning!

For proper installation, this refrigerator

must be placed on a level surface of hard

material that is the same height as the rest

of the flooring. This surface should be

strong enough to support a fully loaded

refrigerator.

The rollers, which are not castors, should

be only used for forward or backward

movement. Moving the refrigerator

sideways may damage your floor and the

rollers.

Ventilation of a liance

Install the appliance in a plane

and stable surface. Assure

good ventilation.

We recommend letting a space at least:

- 75mm from the back to the wall

- 100mm from the top to the wall

- 100mm from its side to the wall

Enough space must be provided in the

front of the appliance to allow the doors to

open as shown in follow diagrams.

Note:



This appliance performs well within the

climate class from SN to T showed in the

table below. It may not work properly if

being left at a temperature above or below

the indicated range for a long period.

limate class

Ambient temperature

SN +10° to +32°

N +16° to +32°

ST +16° to +38°

T +16° to +43°



Stand your appliance in a dry place to

avoid high moisture.



Keep the appliance out of direct sunlight,

rain or frost. Stand the appliance away

from heat sources such as stoves, fires or

heaters.

Leveling of a liance

For sufficient leveling and air circulating

in the lower rear section of the appliance,

the bottom feet may need to be adjusted.

You can adjust them manually by hand or

by using a suitable spanner.

To allow the doors to self-close, tilt the

top backwards by 10-15 mm.

Whenever you want to move the

appliance, remember to turn the feet back

up, so that the appliance can roll freely.

Reinstall the appliance when relocating.

Doors removal

In case when your access door is too

narrow for the refrigerator to pass through,

remove the refrigerator door and drawers.

Then pass the refrigerator laterally. If you

do not need to remove the appliance

doors, go to ‘Installing the water lines’ on

page 11.If you need to remove the doors,

continue below.

Warning!

When reversing the door, the appliance

must be unplugged.

The tools you will need (Not rovided):

Allen Wrench(4mm)

Wrench(8mm)

Philips screwdriver

Disassembling the fridge door

Some models may be slightly different

from pictures. If some parts shown in the

picture cannot found in your appliance,

please ignore the relevant description.

1. With the door closed, remove the 3

screws holding the top cover (A) with

Philips (+) screwdriver, and then remove

the top cover carefully with the

entire-harnesses unattached.

2.Take out connectors and the water

coupler from the installation clip.

Remove the two wire connectors (press

the top of the connector (B) and separate

it from the other one) on the left side

door .To remove the water coupler from

the hinge, twist and pull the clips from the

coupler then remove the water line ( )

while pressing the movable part (D) of the

water line coupler.

3. Remove the 3 screws (B) fixed on the

hinges with a Wrench (8mm) and 1 ground

screws ( ) attached to the hinge with

Philips (+) screwdriver. Remove the upper

left and right door hinges (D).

4. Use your both hands to open the door

more than 90

. Lift it up and take it off.

（

Be careful of racks while remove the

door.

）

5. Remove the 4 hex head bolts (E) with

an Allen wrench (4 mm). Remove the 2

screws with screwdriver. Then remove the

lower left and right door hinges (F).

Re-attaching the fridge doors

To reattach the fridge doors after you have

moved the appliance to its final location,

assemble the parts in reverse order.

1. To prevent water leaks, the water line

should be fully inserted into the center of

the coupler until the guide lines are

coincided exactly with the head of the

movable part.

Note

：

：：

：

Arrow on the water line coupler point to

the direction of the door.

2. Make sure the clips are properly

connected to the coupler.

Caution!

In case the fridge doors can’t be

self-closed, please make sure the door

opened more than 90

when you remove

or re-attaching the fridge doors.

Disassembling the freezer door

1. Pull out the freezer door and the upper

freezer drawer (A) to the final position.

Then take out the ice box (B) by lifting it up

in the direction of the arrow.

Otros manuales para RF702N4IS1

Tabla de contenidos

Otros manuales de Refrigerador de Hisense

Hisense

Hisense HRQ215N6BVD Manual de usuario

Hisense

Hisense RQ560N4WC1 Instrucciones de montaje

Hisense

Hisense RT156D4AG1 Instrucciones de montaje

Hisense

Hisense RS-34WC SERIES Manual de usuario

Hisense

Hisense RQ22N6ASD Manual de usuario

Hisense

Hisense RB645N4BFE Instrucciones de montaje

Hisense

Hisense RB15A2CWE Instrucciones de montaje

Hisense

Hisense FV14D6AWD Instrucciones de montaje

Hisense

Hisense RS-77WC1SQD/UPE-001 Manual de usuario

Hisense

Hisense RB15N6ASE Instrucciones de montaje

Hisense

Hisense RD-43WR4SHD/BVA-001 Instrucciones de montaje

Hisense

Hisense HRCD609S Instrucciones de montaje

Hisense

Hisense WMS017M6XBE Manual de usuario

Hisense

Hisense RB292F4WB1 Instrucciones de operación

Hisense

Hisense RB296F4AW1 Instrucciones de montaje

Hisense

Hisense RT12A2CSE Manual de usuario

Hisense

Hisense RT-41WC4SAX Manual de usuario

Hisense

Hisense RT393D4AW1 Manual de usuario

Hisense

Hisense HR6BMFF320 Instrucciones de montaje

Hisense

Hisense RT641N4WFE Instrucciones de montaje

Hisense

Hisense RF632N4BBF Instrucciones de montaje

Hisense

Hisense RS723N4WC1 Instrucciones de montaje

Hisense

Hisense RB548N4ABN Instrucciones de montaje

Hisense

Hisense RT417N4DC1 Instrucciones de montaje

Manuales populares de Refrigerador de otras marcas

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Manual de usuario

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Manual de usuario

Sharp

Sharp SJ-BA31IEXW2-EU Manual de usuario

CORBERO

CORBERO CC2300MCW Manual de usuario

KitchenAid

KitchenAid 2205264 Manual de usuario

Stengel

Stengel KU 1101 A++ Manual de usuario

NEFF

NEFF KI181 Series Manual de usuario

Hoshizaki

Hoshizaki Reach-In Manual de usuario

Amana

Amana ASD2524VES00 Manual de usuario

BOMANN

BOMANN KGC 213 Manual de usuario

Danby

Danby DAR044A1SLDD Instrucciones de montaje

Samsung

Samsung RF323TE Manual de usuario

Beko

Beko CSA31022 Manual de usuario

IKEA

IKEA FROSTIG C 185 E Manual de usuario

Electrolux

Electrolux ER 6821 D Manual de usuario

True

True TS-28 Manual de usuario

Frigidaire

Frigidaire FSC23R5DW9 Manual de usuario

Beko

Beko LSP4579W Manual de usuario