10 Vedpak 98_Version 6_12.2017
160775
Jump
By pressing this button, the driver will be able to obtain the image
selected under this setting.
QUAD Obtain image from all camera input in quad picture while
pressing the JUMP button and press again to return the default
screen.
SEQ. Corresponding with “SEQ. Timer Step” setting to jump channel
by time sequence.
CAM A Obtain image from camera A while pressing the JUMP button and
press again to return the default screen.
CAM B Obtain image from camera B while pressing the JUMP button and
press again to return the default screen.
CAM C Obtain image from camera C while pressing the JUMP button and
press again to return the default screen.
CAM R Obtain image from camera R while pressing the JUMP button and
press again to return the default screen.
CAM A+B Obtain image from camera A+B in dual picture while pressing the
JUMP button and press again to return the default screen.
CAM C+R Obtain image from camera C+R in dual picture while pressing the
JUMP button and press again to return the default screen.
CAM A+R Obtain image from camera A+R in dual picture while pressing the
JUMP button and press again to return the default screen.
CAM R+B Obtain image from camera R+B in dual picture while pressing the
JUMP button and press again to return the default screen.
CAM A+C Obtain image from camera A+C in dual picture while pressing the
JUMP button and press again to return the default screen.
CAM C+B Obtain image from camera C+B in dual picture while pressing the
JUMP button and press again to return the default screen.
CAM R/AB Obtain image from camera R+A+B in triple picture while pressing
the JUMP button and press again to return the default screen.
CAM R+AB Obtain image from camera R+A+B in triple picture while pressing
the JUMP button and press again to return the default screen.
Default value is QUAD.
Cam Out
Composite video loop out to recorder, monitor or other device.
QUAD Recording or viewing from the output device in quad mode
CAM A Recording or viewing from the output device for CAM A image
CAM B Recording or viewing from the output device for CAM B image
CAM C Recording or viewing from the output device for CAM C image
CAM R Recording or viewing from the output device for CAM R image
Default value is QUAD.
SEQ Time Step
Select Cam A/B/C/R switching time
setting value from 02~100
Default value is “02”
RETURN
Return to OSD menu selection screen.
Information
This menu set up contains Recall & Exit function.
Recall Recall factory default.
Exit Exit OSD menu.
Notice: Firmware version has shown on last column.
