HBM MX403B Manual de usuario

English Deutsch Français

Voltage measurement module

1000V CAT II

600 V CAT III

MX403B

Operating Manual

A3757-1.0_en/de/fr

MX403B

2 A3757-1.0_en/de/fr

English

1 Introduction 3..............................................

2 Safety instructions 6........................................

2.1 Warning signs and danger symbols 6...........................

2.1.1 Symbols on the measurement module 7........................

2.2 Proper use 7................................................

2.3 Measurement categories 9....................................

2.4 Operating conditions 11.......................................

2.5 Maintenance, repair and modification 12.........................

2.6 Cleaning 13..................................................

2.7 Transportation, storage and disposal 14.........................

2.8 Qualified Personnel 15........................................

2.9 Working safely 15.............................................

2.10 System integration 19.........................................

3 Additional markings used 20.................................

4 Scope of delivery 21.........................................

5 Accessories 22..............................................

6 MX403B operation 24........................................

6.1 Preparatory measures and starting up 24........................

6.2 Connection/measurement 25...................................

6.3 Status Display 27.............................................

7 Specifications 28............................................

MX403B

A3757-1.0_en/de/fr 3

1 Introduction

QuantumX is a modular data acquisition system from

HBM for demanding measurement and test functions.

The different inputs acquire mechanical, electrical, hy

draulic and thermal measurands, such as force, strain,

torque, pressure, displacement, temperature, rotational

speed, acceleration, position, flow rate, voltage, etc.

The MX403B voltage measurement module can measure

voltages as high as 1000 V, as well as small differential

voltages at high electric potential.

The QuantumX family documentation basically com

prises:

SThe current operating manual for the voltage meas

urement module (available in printed form)

SA quick start guide for initial start-up (available in prin

ted form)

SData sheets for the individual modules and accessor

ies

SThe QuantumX operating manual with connection de

scriptions and possible system topologies and states

SThe operating manual for the EtherCAT1) / Ethernet

Gateway CX27

SThe operating manual for data recorder CX22-W /

CX22

SA comprehensive online help with index and easy

search options which is available after the installation

of a software package (e.g. QuantumX Assistant, cat

manEASY)

1) EtherCAT®is a registered brand and patented technology, licensed by Beckhoff Automation

GmbH, Germany

MX403B

4 A3757-1.0_en/de/fr

These documents can be found:

SOn the QuantumX system CD supplied with the device

SAfter installing the QuantumX Assistant on the hard

drive of your PC

SUp-to-date versions are always available from our In

ternet site at http://www.hbm.com/hbmdoc

Note

When working with the MX403B, always take note of the

standard operating manual (I2322) as well.

The high level of protection of the MX403B is guaranteed

by consistent development in accordance with the latest

conditions specified in the measuring equipment stand

ards IEC 61010-1:2010+Cor.:2011 and

IEC 61010-2-030:2010+Cor.:2011, as well as by VDE

certification and production monitoring.

The MX403B has four insulated differential measurement

channels for directly measuring voltages up to 1000 V DC

or 1000 V rms AC.

The different measuring ranges allow the acquisition of

high voltages to remote ground, as well as the measure

ment of small differential voltages at high potential to re

mote ground.

The connection is made with 4 mm safety lab jacks,

19 mm pitch, suitable for standardized BNC adapters.

Each channel is equipped with a programmable amplifier,

analog reconstruction and antialiasing filters, a 24bit

ADC and digital filters.

MX403B

A3757-1.0_en/de/fr 5

MX403B

6 A3757-1.0_en/de/fr

2 Safety instructions

This measurement module is built and tested in accord

ance with EN 61010, Safety Requirements for Electrical

Equipment for Measurement, Control and Laboratory

Use, and was in perfect condition when it left production.

To maintain this condition and ensure risk-free operation

(reducing residual risks, EN 610101:2010 17 c), the user

must comply with the instructions and warning notices

contained in this operating manual.

2.1 Warning signs and danger symbols

Important instructions for your safety are specifically iden

tified. It is essential to follow these instructions in order to

prevent accidents and damage to property.

DANGER

This marking warns of an imminently threatening danger

ous situation which - if safety requirements are disregarded

- will result in death or serious physical injury.

Note

This marking draws attention to a situation which - if dis

regarded - can result in damage to property.

MX403B

A3757-1.0_en/de/fr 7

2.1.1 Symbols on the measurement module

Take details in the operating manual into account

Read and comply with the operating manual.

2.2 Proper use

The MX403B voltage measurement module fits perfectly

into the modular QuantumX series and is solely used to

measure high differential voltages or differential voltages

at high potential to remote ground, within the ratings

stated in the specifications.

The device is not intended for use as a safety compon

ent. Please also refer to the section: "Additional safety

precautions".

Proper and safe operation requires proper transportation,

correct storage, siting and mounting, and careful opera

tion.

Everyone involved with siting, starting up, or operating

the measurement module must have read and under

stood the operating manual and in particular the technical

safety instructions.

In the interests of safety, the measurement module

should only be operated by qualified personnel (see be

low) and as described in the operating manual. It is also

essential to comply with the legal and safety require

ments for the application concerned during use. The

same applies to the use of accessories.

MX403B

8 A3757-1.0_en/de/fr

DANGER

If the measurement module is not used as intended, the

protection provided by the measurement module may be

impaired.

DANGER

If the measurement module is used outside the ratings,

the protection provided by the measurement module may

be impaired.

MX403B

A3757-1.0_en/de/fr 9

2.3 Measurement categories

The MX403B is designed for applications in measure

ment categories CAT II and CAT III:

CAT II

Measurement category II is applicable to test and meas

uring circuits that are directly connected to the user con

nections (sockets) of the low-voltage grid installation. It is

expected that this part of the installation will have at least

three levels with overload protection elements between

the transformer and the measuring circuit connection

point.

CAT III

Measurement category CAT III is applicable to test and

measuring circuits that are connected to the distribution

circuit of the building low-voltage grid installation. It is ex

pected that this part of the installation will have at least

two levels with overload protection elements between the

transformer and the measuring circuit connection point.

MX403B

10 A3757-1.0_en/de/fr

DANGER

For all other applications at the low-voltage installation

there is a risk related to:

SElectric shock

SArc flash burns

SArc blast explosion and

SOther phenomena

The MX403B is only suitable for rated voltages within the

measurement categories described - the MX403B is not

suitable for any other applications at the low-voltage in

stallation and its use here is not permitted.

Outside the measurement categories

The following applies to test and measuring circuits

without a rated measurement category (formerly CAT I):

Whether the MX403B is suitable for test or measuring

circuit applications not intended for direct connection to

the supply network can only be determined by an accur

ate analysis of the operating voltage, peak voltage, loop

impedance, occasional overvoltage and transient over

voltage of these circuits. The following characteristics

apply to the MX403B in this respect:

SPeak voltage: max. 1250 V

SLoop impedance: min. 100 m

(see EN 61010-2-030:2011 Table AA.1)

SOccasional overvoltage: none

STransient overvoltage: "3000 V

Tabla de contenidos

Idiomas:

Otros manuales de Unidad de control de HBM

HBM

HBM MXFS Manual de usuario

HBM

HBM MP55 Manual de usuario

HBM

HBM QuantumX MX840 Manual de usuario

HBM

HBM AD105D Manual de usuario

HBM

HBM Z6AM Manual de usuario

HBM

HBM MP70DP Manual de usuario

HBM

HBM TIM40 Manual de usuario

HBM

HBM TEDS Manual de usuario

HBM

HBM TN Manual de usuario

HBM

HBM MP55 Manual de usuario

HBM

HBM DT85 Manual de usuario

HBM

HBM DT85 Manual de usuario

HBM

HBM SomatXR 1-CASEMOUNT2-2 Manual del operador

Manuales populares de Unidad de control de otras marcas

Festo

Festo Compact Performance CP-FB6-E Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manual de usuario

JS Automation

JS Automation MPC3034A Manual de usuario

JAUDT

JAUDT SW GII 6406 Series Guía rápida

Spektrum

Spektrum Air Module System Manual de usuario

BOC Edwards

BOC Edwards Q Series Manual de usuario

KHADAS

KHADAS BT Magic Manual de usuario

Etherma

Etherma eNEXHO-IL Manual de usuario

PMFoundations

PMFoundations Attenuverter Manual de usuario

GEA

GEA VARIVENT Manual de usuario

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manual de usuario

Altronix

Altronix LINQ8PD Instrucciones de montaje

Eaton

Eaton Powerware Series Manual de usuario

WAGO

WAGO 750-407/040-000 Manual de usuario

Sony

Sony CCU-590 Manual de usuario

Graco

Graco 25D614 Manual de usuario

Task Force Tips

Task Force Tips YE-RF-900 Manual de programación

Shini

Shini SPV-U Series Manual de usuario