HBM MP55 Manual de usuario
Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra
A0563-5.6 en
PME industrial
measurement
electronics linked
to a field bus
MP55 module
Operating manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
3
PME-MP55
HBMA0563-5.6 en
Contents Page
Safety instructions 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Introduction 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 List of components and accessories supplied 7. . . . . . . . . . . . . . . .
1.2 Introduction 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Choose amplifier settings with the aid of DIP switches 8. . . . . . . . .
3 Fitting/removing the MP55 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1 Linking several modules 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Connections 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1 Functional overview of the MP55 14. . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2 Supply voltage and remote contact I/Os 15. . . . . . . . . . . . . . . . . . . . .
4.2.1 External supply voltage for the control I/Os 16. . . . . . . . . . . . . .
4.3 Transducers 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4 CAN-interface 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.5 Synchronisation 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Setting up and operation (MP55) 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1 Operating principles 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2 Commissioning 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3 Overview of all groups and parameters 25. . . . . . . . . . . . . . . . . . . . . .
5.3.1 Set up all parameters 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Declaring the significant parameters 30. . . . . . . . . . . . . . . . . . . . . . . . . .
7 CAN interface description 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1 Introduction 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2 Cyclical data transmission 38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3 Parameter assignment 39. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.4 Object directory: communications profile section
as defined in CANopen (CiA-DS301) 41. . . . . . . . . . . . . . . . . . . . . . . .
7.5 Object directory: manufacturer-specific objects 44. . . . . . . . . . . . . . .
7.6 Manufacturer-specific objects in FLOAT data format 53. . . . . . . . . . .
7.7 Examples 55. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 Error messages/operating status (LED) 57. . . . . . . . . . . . . . . . . . . . . . .
9 Specifications 60. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 Keyword index 63. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
4PME-MP55
HBM A0563-5.5 en
Safety instructions
Use in accordance with the regulations
The MP55 module and its connected transducers are to be used exclusively
for measurement tasks and directly related control tasks. Use for any addi-
tional purpose shall be deemed to be not in accordance with the regulations.
In the interests of safety, the instrument should only be operated as described
in the User Manual. It is also essential to observe the appropriate legal and
safety regulations for the application concerned during use. The same applies
to the use of accessories.
The device must not be connected directly to the mains supply. The
maximum permissible supply voltage is 18...30 V.
General dangers of failing to follow the safety instructions
The MP55 module corresponds to the state of the art and is safe to operate.
The instrument can give rise to further dangers if it is inappropriately installed
and operated by untrained personnel.
Everyone involved with the installation, commissioning, maintenance or repair
of the instrument must have read and understood the User Manual and in par-
ticular the technical safety instructions.
Conditions on site
Protect the device from direct contact with water (IP20).
Maintenance and cleaning
The MP55 module is maintenance-free. Please note the following points when
cleaning the housing:
- Before cleaning, disconnect the devices from the power supply.
- Clean the housing with a soft, slightly damp (not wet!) cloth. You should
never use solvent, since this could damage the labelling on the front panel
and the display.
- When cleaning, ensure that no liquid gets into the device or connections.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
5
PME-MP55
HBMA0563-5.5 en
Residual dangers
The scope of supply and list of components provided with the MP55 cover
only part of the scope of measurement technology. In addition, equipment
planners, installers and operators should plan, implement and respond to the
safety engineering considerations of measurement technology in such a way
as to minimise residual dangers. Prevailing regulations must be complied with
at all times. There must be reference to the residual dangers connected with
measurement technology.
Any risk of residual dangers when working with the MP55 is pointed out in this
introduction by means of the following symbols:
Symbol: WARNING
Meaning: Dangerous situation
Warns of a potentially dangerous situation in which failure to comply with
safety requirements can lead to death or serious physical injury.
Symbol: CAUTION
Meaning: Possible dangerous situation
Warns of a possibly dangerous situation in which failure to comply with safety
requirements can cause damage to property or lead to some form of physical
injury.
Symbol: NOTE
Means that important information about the product or its handling is being
given.
Symbol:
Meaning: CE mark
The CE mark enables the manufacturer to guarantee that the product com-
plies with the requirements of the relevant EC directives (the declaration of
conformity is available at http://www.hbm.com/support/dokumentation).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
6PME-MP55
HBM A0563-5.5 en
Working safely
Error messages should only be acknowledged if the cause of the error is re-
moved and no further danger exists.
The instrument complies with the safety requirements of DIN EN 61010,
Part 1 (VDE 0411, Part 1).
To ensure adequate immunity from interference, use only Greenline shielded
ducting (place the shield of the transducer cable onto the connector housing).
The MP55 module must be operated with an extra-low safe voltage (supply
voltage 18 to 30 V DC).
Conversions and modifications
The MP55 module must not be modified from the design or safety engineering
point of view except with our express agreement. Any modification shall ex-
clude all liability on our part for any damage resulting therefrom.
In particular, any repair or soldering work on motherboards is prohibited.
When exchanging any modules, only original HBM parts must be used.
Qualified personnel
This instrument is only to be installed and used by qualified personnel strictly
in accordance with the technical data and with the safety rules and regulations
which follow. It is also essential to comply with the appropriate legal and
safety regulations for the application concerned during use. The same applies
to the use of accessories.
Qualified personnel means persons entrusted with the installation, assembly,
commissioning and operation of the product who possess the appropriate
qualifications for their function.
Maintenance and repair work on an open device with the power on must only
be carried out by trained personnel who are aware of the dangers involved.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
7
PME-MP55
HBMA0563-5.5 en
1 Introduction
1.1 List of components and accessories supplied
List of components supplied:
D1 MP55 module
D3 x 6-pin terminal plugs, coded
Order No.: 3.3312-0251 (terminal plug 3);
3.3312-0252 (terminal plug 4); 3.3312-0250 (terminal plug 1)
D10-pin ribbon cable jack-connector
D1 User Manual for the MP55 module
Accessories:
D15-pin Sub-D connector for transducer, Order No.: 3.3312-0182
DStandard ribbon cable, 10pin, 1.27 mm pitch
1.2 Introduction
The MP55 module from the PME product line is a carrier-frequency amplifier,
and is ideal for connecting the widest possible technological varieties of force,
pressure, torque and displacement transducers as well as load cells. The
MP55 module is set up, and its parameters are assigned, using either the key-
board and display or the PME Assistent. The PME Assistent provides an easy
operator interface under MS-Windows and this is used for assigning parame-
ters to modules (as described in the ”PME Assistant” online help).
µP
A
D
Smart signal condi-
tioning, e.g. limit va-
lue switch
D
A
Keyboard & display
MP55
Carrier-frequency
transducer excitation
Analogue output
Control I/Os
CANopen in-
terface
24 V
DC
DC Supply voltage
Fig. 1.1: Block diagram of the MP55 module
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
8PME-MP55
HBM A0563-5.5 en
2 Choose amplifier settings with the aid of DIP switches
NOTE
The DIP switches must be set up/changed before the PME is fitted.
Various settings are defined with DIP switches and can be read out via the
display (see chapter 5.3). These are the settings for
bridge excitation voltage, effective range, bridge type, analogue output,
master/slave, terminating bus impedance, edge steepness
To set up the DIP switches proceed as shown in Fig. 2.1.
Unscrew the
cover
1
2
S1/S2
S5
S10
S11
S12
Fig. 2.1: Open the housing; position of the DIP switches
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
9
PME-MP55
HBMA0563-5.5 en
ON ON
Upper
board:
Lower
board:
S10
S11
123456123456
ON
123456
S10 S11 S12
ON ON
S2 S1
S12
123
ON
S5
1
2
3
5
4
6
1
2
3
5
4
6
1
2
3
5
4
6
ON ON ON
123456 12 3456
Master/
Slave
Analogue
output
Bridge
type
Analogue output
Bridge ex-
citation vol-
tage
123456 123456
ON ON
S2 S1
Switch positions
must not be changed!
Input
range
Bridge ex-
citation
voltage
Bridge
type
Input
range
Amplifier type
S10, S11 and
S12 and S5
S1 and S2
Factory settings:
WARNING
1
2
3
ON
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Otros manuales para MP55
2
Tabla de contenidos
Otros manuales de Unidad de control de HBM
HBM
HBM MP70DP Manual de usuario
HBM
HBM AD105D Manual de usuario
HBM
HBM TIM40 Manual de usuario
HBM
HBM TEDS Manual de usuario
HBM
HBM MP55 Manual de usuario
HBM
HBM TN Manual de usuario
HBM
HBM Z6AM Manual de usuario
HBM
HBM MXFS Manual de usuario
HBM
HBM DT85 Manual de usuario
HBM
HBM SomatXR 1-CASEMOUNT2-2 Manual del operador
Manuales populares de Unidad de control de otras marcas
Festo
Festo Compact Performance CP-FB6-E Manual de lista de piezas
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manual de usuario
JS Automation
JS Automation MPC3034A Manual de usuario
JAUDT
JAUDT SW GII 6406 Series Guía rápida
Spektrum
Spektrum Air Module System Manual de usuario
BOC Edwards
BOC Edwards Q Series Manual de usuario
