HAMPTON BAY HBTF1045R3-35 Manual de usuario

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service

8 a.m. –7 p.m., EST, Monday –Friday

9 a.m. –6 p.m., EST, Saturday

1-855-HD-HAMPTON

HAMPTONBAY.COM

USE AND CARE GUIDE

____________________________________

FOUR LIGHT LED FIXED TRACK

THANK YOU

We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this four light LED

fixed track. We strive to continually create quality products designed to enhance your home. Visit us online to see our

full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!

Item:

Model: 1003 905 269

HBTF1045R3-35

Before starting installation of this fixture or

removal of a previous fixture, disconnect

the power by turning off the circuit breaker

or by removing the fuse at the fuse box.

Consult a qualified electrician if you have

any electrical questions or need to replace

the driver.

If you have any non-electrical questions

about this fixture, please contact our

Customer Service Team at

1‐855‐HD‐HAMPTON or

HAMPTONBAY.COM.

WARNING: Disconnect the power prior to

removing or installing a light fixture.

Table of Contents

Safety Information

Warranty

WHAT IS COVERED

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship

for a period of five (5) years from date of purchase. This warranty applies only to the original

consumer purchaser and only to products used in normal use and service. If this product is found to

be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or

replacement of the product at the manufacturer’s discretion, provided that the product has not been

damaged through misuse, abuse, accident, modifications, alterations, neglect or mishandling.

WHAT IS NOT COVERED

This warranty shall not apply to any product that is found to have been improperly installed, set-up,

or used in any way not in accordance with the instructions supplied with the product. This warranty

shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence,

alteration, or faulty installation, or any other failure not relating to faulty material or workmanship.

This warranty shall not apply to the finish on any portion of the product, such as surface and/or

weathering, as this is considered normal wear and tear.

The manufacturer does not warrant and specially disclaims any warranty, whether expressed or

implied, of fitness for a particular purpose, other than the warranty contained herein. The

manufacturer specifically disclaims any liability and shall not be liable for any consequential or

incidental loss or damage, including but not limited to any labor/expense costs involved in the

replacement or repair of said product.

Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.

Operation 7

Remote Control 7

Care and Cleaning 8

Exterior Maintenance 8

Interior Maintenance 8

FCC Notice 8

IC Notice 8

Troubleshooting 9

Table of Contents 2

Safety Information 2

Warranty 2

Pre-Installation 3

Planning the Installation 3

Tools 3

Hardware 3

Package Contents 4

Installation 5

Do not mix old and new batteries.

Do not mix alkaline, standard (carbon-

zinc), or rechargable (ni-cad, ni-mh, etc)

batteries.

Pre-Installation

PLANNING THE INSTALLATION

Read all instructions before assembly and installation. Before starting installation of the fixture or

removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing

the fuse at the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive

surface such as carpet or cardboard.

NOTE: Keep your receipt and these instructions

for Proof of Purchase.

TOOLS REQUIRED

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Part Description Quantity

Wire Nut

Canopy Screw

Mounting

Screw 2

Part Description Quantity

Ceiling Anchor

Anchor Screw

Mounting Bracket

Flat Head

Screwdriver

Wire

Cutter

Phillips

Screwdriver

Wire

Stripper Pencil Drill Bit

Electrical

Tape

Safety

Goggles

LadderDrill

(2) AAA

Batteries

CC DD EE

AA BB

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

Fixture

Remote

Mount 1

Remote Control

B C

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Installation

Mount the mounting bracket (FF) to the

outlet box using the mounting screws (CC).

Connect the black supply wire to the black

fixture wire using a wire nut (AA).

Connect the white supply wire to the white

fixture wire using a wire nut (AA).

Connect the fixture ground wire and the

supply ground wire together using a wire

nut (AA).

Wrap all wire connections with electrical

tape for a more secure connection.

Carefully tuck all wires and wire nuts (AA)

into the outlet box.

Connecting the wires

Mounting the hardware

NOTE: If you have electrical questions consult

your local electrical code for approved

grounding methods.

3 Securing the fixture

Place the fixture (A) over the outlet box

and flush against the ceiling surface.

Align the holes on the mounting bracket

(FF) to the holes on the fixture (A).

Secure the canopy of the fixture (A) using

the canopy screws (BB).

4 Securing the remote wall mount

Place the remote mount (B) on the desired

location of your wall and mark the

mounting holes with a pencil.

Use a 0.25 in drill bit to drill the two holes

into your wall.

Tap in an wall anchor (DD) into each hole.

Align the remote mount (B) over the holes

and secure the remote mount (B) in place

using the anchor screws (EE).

Installation (continued)

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Operation

Turn on power at the circuit breaker or fuse box.

Turn the light switch on to activate the fixture.

Remote Control

BUTTON FUNCTIONS

Power ON/OFF.

OFF: Turns off all the lights.

Other remote buttons cannotbe used in the off state.

ON: Turns the lights on and returns it to the last settings used.

Turn the flush mount and track heads on at the same time

at 100% brightness.

Turn only the flush mount on (100% brightness).

Turn only the track heads on (100% brightness).

Dim the light up (brighten).

Dim the light down.

OPERATION WITHOUT REMOTE:

If the remote is lost, the light can still be operated at factory settings. To operate the fixture without a

remote, turn off the light switch leading to the fixture. Leave the fixture off for 90 seconds, then use

the switch to turn the fixture back on. The track and flush mount lights will come on together. Until the

remote is recovered, the light switch can now be used to operate the fixture.

PAIRING FIXTURES

If the fixture is not paired with the remote out of the box, follow these steps:

You must be within an unobstructed distance of 2 –3 meters (6-10 feet) to pair your remote to

your light fixture.

Long press the ON/OFF key for 5 seconds. The red indicator on the remote will flash three

times, indicating that the fixture has been paired.

DISCONNECTING FIXTURES

Long press the ON/OFF key for 5 seconds. The red indicator on the remote will flash five times,

indicating that the fixture is no longer paired to the remote.

OPERATING DISTANCE

An unobstructed remote can function up to a distance of 6 –9 meters (20 –30 feet).

NOTE: The fixture has with an internal dimmer.

Do not connect the fixture to an external

dimmer. Doing so may prevent the fixture from

operating as intended.

NOTE: The light switch must be on in order to

control the light fixture with the remote control.

NOTE: The light switch must be on in order to

control the light fixture with the remote control.

NOTE: The remote control can pair 1 to 4

lights, but each fixture needs to be paired

individually (power the fixture on, pair it

disconnect it, and repeat for each additional

fixture).

NOTE: Requires two AAA batteries (not

included).

Care and Cleaning

EXTERIOR MAINTENANCE

Use a dry or slightly dampened clean cloth

and wipe the surface of the fixture.

INTERIOR MAINTENANCE

Disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the

fuse box.

Use a dry or slightly dampened clean cloth to wipe the interior surface of the fixture.

FCC NOTICE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditio

ns: (1) This device may not cause harmful interference; and (2) this device must accept any i

nterference received, including interference that may cause undesired operation.

NOTE 1: This device has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance

with the instruction manual, may cause harmful interference to radio communications.

However, there is no guarantee that interference can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interface by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the device and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

IC NOTICE

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the

following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.

NOTE: Do not use any cleaners with chemicals,

solvents, or harsh abrasives. Use only a dry

soft cloth to dust or wipe carefully.

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Problem

Solution

The

light will not turn on.



Make sure the power supply is on.



Test or replace the switch.



Check the wiring.



Replace the light bulb.

The

fuse

blows or the circuit breaker trips

when the light is turned on.



Check the wire connections.

Troubleshooting

Questions, problems, missing parts? Before returning to the store,

call Hampton Bay Customer Service

8 a.m. –7 p.m., EST, Monday-Friday

9 a.m. –6 p.m., EST, Saturday

1-855-HD-HAMPTON

HAMPTONBAY.COM

Retain this manual for future use.

Tabla de contenidos

Idiomas:

Otros manuales de Equipo de iluminación de HAMPTON BAY

HAMPTON BAY

HAMPTON BAY EC1577BK-D Manual de usuario

HAMPTON BAY

HAMPTON BAY HD29029 Manual de usuario

HAMPTON BAY

HAMPTON BAY ORON HDP12070BN Manual de usuario

HAMPTON BAY

HAMPTON BAY 335-806 Manual de usuario

HAMPTON BAY

HAMPTON BAY 680-247 Manual de usuario

HAMPTON BAY

HAMPTON BAY 407-669 Manual de usuario

HAMPTON BAY

HAMPTON BAY HD38682 Manual de usuario

HAMPTON BAY

HAMPTON BAY 522-541 Manual de usuario

HAMPTON BAY

HAMPTON BAY 536 579 Manual de usuario

HAMPTON BAY

HAMPTON BAY 524 505 Manual de usuario

HAMPTON BAY

HAMPTON BAY KFN1303AX-01/BR Manual de usuario

HAMPTON BAY

HAMPTON BAY HD28451 Manual de usuario

HAMPTON BAY

HAMPTON BAY 12300-18 Manual de usuario

HAMPTON BAY

HAMPTON BAY 92370-701-2PK Manual de usuario

HAMPTON BAY

HAMPTON BAY HB2573-07 Manual de usuario

HAMPTON BAY

HAMPTON BAY DC9557BK-B-3 Manual de usuario

HAMPTON BAY

HAMPTON BAY 62944 Manual de usuario

HAMPTON BAY

HAMPTON BAY 046335947689 Manual de usuario

HAMPTON BAY

HAMPTON BAY Black Finish Manual de usuario

HAMPTON BAY

HAMPTON BAY HD22514 Manual de usuario

HAMPTON BAY

HAMPTON BAY 626-464 Manual de usuario

HAMPTON BAY

HAMPTON BAY 50180 Manual de usuario

HAMPTON BAY

HAMPTON BAY Home Depot SKU 401-718 Manual de usuario

HAMPTON BAY

HAMPTON BAY Windsor 336-610 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario