Haier HLTD500ACW Manual de usuario

SERVICE MANUAL

This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not

contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by

electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service or repair the product or

products dealt with in this service information by anyone else could result in serious injury or death

Top Load Electric Dryer

Order No. TL1501S003V1.1

WARNING

Edition

r Dryer Machine

H ier Group

Model No.HLTD500ACW

SERVICE MANUL

Model No.HLTD500ACW

Contents

Chapter 1 General Information ________________________________________________

1-1. General Guidelines_____________________________________________________

1-2. Caution and Warning symbols ____________________________________________

1-3. Function indication symbols ______________________________________________

Chapter 2 Product Feature ___________________________________________________

2-1. Features _____________________________________________________________

2-2. Specification __________________________________________________________

Chapter 3 Matters needing attention ___________________________________________

3-1. Safety _______________________________________________________________

3-2. During Use ___________________________________________________________

Chapter 4 Operational Guidance ______________________________________________

Chapter 5 Drying Mathods ___________________________________________________

5-1. Preparations before drying _____________________________________________

5-2. Load clothes into dryer ________________________________________________

5-3. Selecting Drying program ______________________________________________

Chapter 6 Appearance brief introduction ______________________________________

6-1. Name of parts _______________________________________________________

6-2. Net dimension_______________________________________________________

Chapter 7 Disassembly and Installation _______________________________________

7-1. Remove packing materials _____________________________________________

Issue

Rev.

- 1 -

7-2. Exhaust Requirements ________________________________________________

7-3. Adjusting the Dryer ___________________________________________________

7-4. Electrical Requirements _______________________________________________

7-5. Location of your dryer _________________________________________________

7-6. Manufacation (mobile) home installation __________________________________

7-7. Electrical installation __________________________________________________

7-8. Electrical connections

Chapter 8 Wiring circuit and Electric appliances parameter________________________

Chapter 9 Error Display and troubleshooting ___________________________________

9-1. Error Display _________________________________________________

9-2. Examination & Troubleshooting ________________________________________

9-2-1.

Display nothing ____________________________________________

9-2-2.

The computer is power on and display right,but the dryer no action

9-2-5. Use the “AUTOMATIC CYCLES” program the clothes is very dry but the dryer

is drying at all times_

9-2-6. Too much noise in drying ___________________________________________

Chapter 10 Maintenance ____________________________________________________

SERVICE MANUL

Model No.HLTD500ACW

Issue

Rev.

- 2 -

9-2-4. Use the “AUTOMATIC CYCLES” program the dryer is drying but the clothes

can’t intensive drying end the program_

________________________________________________

9-2-3. Press the "Start/Pause" button once the dryer have no action, the cycle signal

will beep twice ___________________________________________________

9-1-1. The Digital Tube display “F3” _______________________________________

9-1-2. The Digital Tube display “E6”,the “Clean Lint” indicator light is twinkling ________

9-1-3. The Digital Tube display “F4” _______________________________________

8-1. Wiring Circuit 21

________________________________________________________

8-2. Electric Appliances Parameter 21

__________________________________________

9-2-7. The lamp is not bright when open the door 27

9-2-8. The barrel is continuing runing after opening the door 28

Chapter 1 General Information

1-1. General Guidelines

When servicing, observe the original lead dress. If a short circuit is found, replace all parts which are

overheated or damaged by the short circuit. After servicing ,see to it that all the protective devices such as

insulation barriers ,insulation papers shields are properly installed .Confirm that the screws, parts and wiring

which were removed in order to service are put in the original positions, or whether there are the portions

which are deteriorated around the service places serviced or not. And be sure safety of that.

1-2. Caution and Warning symbols

(You will see them in “Matters needing attention”)

Any instructions in this service manual with this “Warning “sign must be followed strictly.

1-3. Function indication symbols

(You will see them in the specification table)

Signify the drying machine has this function.

Signify the drying machine doesn’t have this function.

SERVICE MANUL

Model No.HLTD500ACW

Issue

Rev.

- 3 -

Chapter 2 Product Feature

2-1. Features

(1). Humidity sensor for automatic drying performance.

Automatic Cycles allow you to match the cycle to the load you are drying. A humidity sensor detects the

moisture in the load and automatically adjusts the drying time for optimal drying.

(2). 5-temperature 3-dry level and 10-program drying setup for energy saving.

(3). Touch Up.

(4).Damp Signal.

(7). Acentric switch more safer.

2-2. Specification

SERVICE MANUL

Model No.HLTD500ACW

Issue

Rev.

- 4 -

(5) Wrinkle saver

(6) End of cycle signal.

Use this setting to help smooth out wrinkles.

The program resches damp status, prompts the user to remove the clothes needing to iron.

At the end of the dry cycle, the dryer will automatically go into the wrinkle saver mode.Here the dryer

tub will tumble periodically for an hour after the dry cycle is completed, (and the wrinkle-time also can

be adjusted.) To stop, simply open the door and remove the clothes.

The dryer is equipped with an audible signal that alert you every time the dryer load is

finished drying.

Drying machines HLTD500ACW

Product identification

Description of appliance Drying machine

Type of appliance(FS = standing, BI = built-in) FS

Supplier own brand Haier

Supplier bar code (America) EAN

Commercial Brand / Model -

Commercial bar code EAN TBC

Key-Features

tf.uC0.7yticapacmurD

Approvals (CSA) CSA

3. Basics data

8001*777*686mm)DxWxH(snoisnemidtinU

Net weight lb. 127.5

Voltage/frequency V/Hz

Rated Input Power / 4800W

Work top / removable -

Control M= electromechanical, E= electronic, F= fuzzy E

Drum S= stainless steel / Z= zinc coated Z

Door:

aesthetic (R= round, Y= big eye, Q= square) Q

Door frame S= stainless steel / M= metal / P= plastic M

Adjustable feet n° 4

120/240V~60Hz

SERVICE MANUL

Model No.HLTD500ACW

Issue

Rev.

- 5 -

Safety systems

Motor overheating protection MOP

Child protection -

Programs

Sanitize,Heavy Duty,Normal,Eco Dry,Perm Press,Delicate n°

Air Dry,Touch Up,Quick Dry,Timed Dry

- 4 -

Optional function keys (additional program settings)

POWER,Start/Pause,Wrinkle saver,Dry Level,Dry Temp,Cycle Status,

Damp Signal,Cycle Signal,Dry Time Adjust,Digtal Tube

Packing dimensions & loadability

0711*838*667mmmm)HxDxW(snoisnemidgnikcaP

Gross weight kg 65.5

40' Container load pcs 84

Logistic / recicling information RS

Packing weight lb. 15

Packing materials / Recycling symbols EPS

)thgiew(notraC gr Shrink package

)thgiew( nerytsiloP gr -

)thgiew(liofenelyteyloP gr -

)thgiew(slairetamgnikcaprehtO gr -

)thgiew(dooW kg -

Service RS

User instruction (languages)

Max. failure rate (12 Months after sales to end customer) %

9. Delivery Time of First Batch Available

Chapter 3 Matters needing attention

3-1. Safety

SERVICE MANUL

Model No.HLTD500ACW

Issue

Rev.

- 6 -

IMPORTANT SAFETY INSTRUCTIONS

Before beginning installation, carefully read these instructions. This will simplify

the installation and ensure the dryer is installed correctly and safely.

NOTE 1 :The electrical service to the dryer must conform with local codes and

ordinances and the latest edition of the National Electrical Code, ANSI/

NFPA 70 or in Canada, CSA C22.1 Canadien Electrical Code Part 1.

NOTE 2: The dryer is designed under ANSI Z21.5.1 or ANSI/UL 2158 - CAN/

CSA C22.2 No. 112-97 (latest editions) for HOME USE ONLY. This

dryer is not recommended for commercial application such as restaurants,

beauty salons, etc.

IMPORTANT SAFETY INSTRUCTIONS

WARNING - To reduce the risk of fire, electric shock, or injury to persons when

using your appliance, follow the basic precautions, including the following:

1.Read all of the instructions before using this appliance.

2.Don’t dry articles that have been previously cleaned in, washed in, soaked in,

or spotted with gasoline, dry clean solvents or other flammable explosive sub

stains as they give off vapors which could ignite or explode.

3. Do not allow children to play on or in the appliance. Close supervision of children

is necessary when the appliance is used near children.

4. Before the appliance is removed from service or discarded, remove the door

to the drying compartment.

5. Do not reach into the appliance if the drum is moving.

6. Do not install or store this appliance where it will be exposed to water and/or

to the weather.

7. Do not tamper with controls.

8. Do not repair or replace any part of the appliance or attempt any servicing unless

specifically recommended in the user-repair instructions that you understand

and have skills to carry out.

9. Do not use fabric softeners or products to eliminate static unless recommended

by the manufacturers of the fabric softener or product.

SERVICE MANUL

Model No.HLTD500ACW

Issue

Rev.

- 7 -

10.Do not use heat to dry articles or products to eliminate static unless recommended

by the manufacturers of the fabric softener or product.

11.Clean lint screen before or after each load.

12.Keep area around the exhaust opening and adjacent surrounding areas free

from the accumulation of lint, dust and dirt.

13.Keep the dryer area clear and free from items that would obstruct the flow

of combustion and ventilation air through the louvered panel located on the rear

of the dryer.

14.The interior of the appliance and the exhaust duct should be cleaned periodically by

qualified service personnel.

15.Do not place items exposed to cooking oils in your dryer. Items contaminated with

cooking oil may contribute to a chemical reaction than could cause a load to catch fire.

16.If material has been used with any flammable liquids or solids, it dryer until all terraces

of flammable liquids should not used in the and its fumes have been removed.

17. This dryer must be properly installed in accordance with the installation instruction

before it is used. See grounding instructions in the installations sections.

18. Proper grounding must be ensured to reduce the risk of electric shock and force. Check

with a qualified electrician or service personnel if you are in doubt as to whether

the dryer is properly grounded.

19. Use the dryer only for its intended purpose: drying clothes.

20. Always disconnect dryer from electrical supply before attempting any service. Disconnect

power cord by grasping the plug, not the cord.

21. Replace worn power cord and/or loose plugs.

22. To reduce the risk of electric shock or fire, do not use extension cords or adapters to

connect dryer electrical power source.

3-2. During Use

Exhaust system Requirements:

1. Do not use plastic flexible duct to exhaust the dryer. Excessive lint can build up

inside exhaust system and create a fire hazard and restrict air flow. Restricted

air flow will increase drying time. If your present system is made up of plastic

duct or metal foil duct, replace it with a rigid or flexible metal duct. Ensure

present duct is free of any lint prior to installing dryer duct.

SERVICE MANUL

Model No.HLTD500ACW

Issue

Rev.

- 8 -

2. The dryer must not be exhausted into any gas vent, chimney, wall, ceiling

attic, crawl or any concealed space of a building.The dryer exhaust system

MUST be exhausted to the outdoors.If the dryer is not exhausted outdoors,

some the laundry area. An accumulation of lint in any area of the home can

create a health and fire hazard.

3. Exceeding the length of duct pipe or number of elbows allowed in the

“Maximum Length” chart can cause an accumulation of lint in the exhaust

system. Plugging the system could create a fire hazard, as well as increase

drying times.

4. Do not screen the exhaust ends of the vent system. Lint can become caught in

the screen, increasing drying time. Use an approved vent hood to terminate the

duct outdoors, and seal all joints with duct tape.

5. All male duct pipe fittings must be installed downstream with the flow of air.

6. Exhaust duct must not be connected or secured with screws or other fastening devices which

extend into the interior of the duct.

7. Do not allow combustible material (clothing, draperies/curtains, paper, etc.) to come in contact

with exhaust system.

Explosion hazard:

Do not install the dryer where gasoline or other flammables are kept or stored. If the dryer

is installed in a garage, it must be a minimum of 18 inches (45.7cm) above the floor.

Failure to do so can result in death, explosion, fire or burns.

Chapter 4 Operational Guidance

SERVICE MANUL

Model No.HLTD500ACW

Issue

Rev.

- 9 -

Understanding the Control Panel

DRY LEVEL BUTTON

When the dryer is first powered on, the Cycle Status lights indicate the stages of the selected

cycles.

As the dryer is operation,the active stage blinks.As a stage is completed, the light will turn off

and the next stage will begin to blink.

The entire dry cycle is complete when all of the status lights turn off.

The Clean Lint indicator will blink when the dryer is turned on as a reminder to clean the lint

screen.It will turn off when a dry cycle is started.

CYCLE SELECTION KNOB

Use this button to turn power to the dryer on and to turn the power off.

NOTE:If the dryer is powered on and is not started,it will automatically turn off after about 5

minutes.

NOTE:This button works with automatic cycles only.

There are 6 Automatic Cycles:

Sanitize - Use this cycle to help sanitize items such as towels,bedding,and children’s clothes.

It is best to turn this cycle to completion.

Heavy Duty - Use this cycle for high-temperature heat and heavyweight fabrics such as towels

and jeans.

Normal - Use this cycle for medium-temperature heat and cottons and linens

Use this button to adjust the dryness level of automatic cycle programs.

  



 













   

 

 

 



 







   



 

  



   

 



 









   

   





  









  



 







ABC D EFGHIJ K

CYCLE STATUS INDICATORS

POWER BUTTON

Tabla de contenidos

Otros manuales de Secadora de Haier

Haier

Haier HDY5-1 Manual de usuario

Haier

Haier HLP141E Manual de usuario

Haier

Haier HD80-26A Manual de usuario

Haier

Haier HDY6-1 Manual de usuario

Haier

Haier RDE350AW - 6.5 Cu. Ft. Electric Dryer Manual de usuario

Haier

Haier GDE560BW Manual de usuario

Haier

Haier T60-32 Manual de usuario

Haier

Haier GDZ5-1 Manual de usuario

Haier

Haier HDV40A1 Manual de usuario

Haier

Haier HLF11E Manual de usuario

Haier

Haier RDE350AW - 6.5 Cu. Ft. Electric Dryer Manual de usuario

Haier

Haier HD80-01 WH HA AA Manual de usuario

Haier

Haier HD90-A636 Manual de usuario

Haier

Haier GDZ5-1 Manual de usuario

Haier

Haier HLF13E Manual de usuario

Haier

Haier HDY-D70 Manual de usuario

Haier

Haier QFD15 Series Instrucciones originales

Haier

Haier HDY6-1 Manual de usuario

Haier

Haier Ginesis HLF103Q Manual de usuario

Haier

Haier GE CleanSpeak WE04X20528 Guía de configuración

Haier

Haier HLF11PC Manual de usuario

Haier

Haier HLP140E - 2.6 cu. Ft. Portable Vented Electric... Manual de usuario

Haier

Haier HDY60 Manual de usuario

Haier

Haier HLP140E - 2.6 cu. Ft. Portable Vented Electric... Manual de usuario

Manuales populares de Secadora de otras marcas

Bosch

Bosch WTA79200GB Manual de usuario

Amana

Amana W10233410A Manual de usuario

Miele

Miele TWH 780 WP Manual de usuario

Asko

Asko T760 Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Manual de usuario

Bosch

Bosch Logixx 10 WTB76556GB Hoja de especificaciones

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Manual de instrucciones

Electrolux

Electrolux EW2H328R2 Manual de usuario

Beko

Beko DS8433RX1M Manual de usuario

Dawlance

Dawlance Spinner DS 6000 C Manual de usuario

Electrolux

Electrolux TP5080TW Manual de usuario

AEG

AEG TR838P4OB Manual de usuario

Indesit

Indesit IDV 75 Manual de usuario

Infiniton

Infiniton SD-DG85C Manual de usuario

BOMANN

BOMANN WT 5019 Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Manual de usuario

Asko

Asko T793C Manual de usuario

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Manual de usuario