Hach SensION3 Guía de referencia

51750-23

Laboratory pH Meter Quick Reference Card

Changing Meter Setup Options

Setup options 1–5 have default settings (underlined in the table). To change the default setting, use

the table below. Settings for options 6–8 must be entered from the setup menu.

Setup How To Get There Description of Option

1 Turn the meter on and press

SETUP.PressENTER.Choose between using the BNC or 5-pin connector. ENTER

toggles between the options. Press EXIT when selection is

complete.

2 Turn the meter on and press

SETUP.Press the up arrow once.

Press ENTER.

Turn display lock On or Off.ENTER toggles between the

options. Press EXIT when selection is complete.

3 Turn the meter on and press

SETUP.Press the up arrow twice.

Press ENTER.

Choose between °C or °F for displayed temperatures.

ENTER toggles between the options. Press EXIT when

selection is complete.

4 Turn the meter on and press

SETUP.Press the up arrow three

times. Press ENTER.

Select measurement resolution from tenths, hundredths, or

thousandths. ENTER toggles between the options. Press

EXIT when selection is complete.

5 Turn the meter on and press

SETUP.Press the up arrow four

times. Press ENTER.

Select pH 6.86 or 7.00 as the pH the meter will automatically

recognize during calibration. ENTER toggles between the

options. Press EXIT when selection is complete.

6 Turn the meter on and press

SETUP.Press the up arrow five

times. Press ENTER.

Select the time of day by pressing the desired number key.

The meter uses a 24-hour clock. All four places must have a

value. Use a 0 if the left-most digit does not have a value

(i.e., 03:08). Press ENTER to accept the value.

7 Turn the meter on and press

SETUP.Press the up arrow six

times. Press ENTER.

Set the month and day by pressing the desired number

keys. The month uses the two places left of the slash; the

day of the month occupies the two places right of the slash.

Enter a 0 if the left-most digit does not have a value

(i.e., 02/06). Press ENTER to accept the value.

8 Turn the meter on and press

SETUP.Press the up arrow seven

times. Press ENTER.

Set the year by using the number keys. Every place must

have a value. Press ENTER to accept the value.

pH Calibration

1. Prepare two or three pH buffers (choose from pH 4.01, 6.86, 7.0, and 10.01 buffers). The meter

can use other buffers for calibration, if desired.

2. Turn the instrument on. Press CAL. The display will prompt for standard 1.

3. Place the pH electrode in one of the buffers.

4. For auto-recognition, press READ/ENTER. To enter the standard value, use the number keys and

press READ/ENTER. Toggle between pH and mV values using the pH mV key.

5. When the reading is stable, the meter will prompt for the next standard. Rinse the electrode

with deionized water.

6. Place the electrode in the second buffer. Press READ/ENTER.

7. Repeat steps 3–6for the third buffer or press EXIT.

8. When the reading is stable, the slope and Store ? will appear.

9. To save the calibration, press ENTER. To exit without saving the calibration, press EXIT.

ap/dk Rev 1 9/99

Otros manuales para sensION3

Otros manuales de Instrumento de medición de Hach

Hach

Hach sensION+ EC5 Manual de usuario

Hach

Hach NA5600 sc Na+ Instrucciones de funcionamiento

Hach

Hach 9525sc Manual de usuario

Hach

Hach 2100Q Manual rápido

Hach

Hach DR1300 FL Manual de usuario

Hach

Hach sension1 Manual de usuario

Hach

Hach TU5300 sc Manual rápido

Hach

Hach Lange SensION+ MM 378 Manual de usuario

Hach

Hach TSS Portable Manual de usuario

Hach

Hach BODTrak II Manual de usuario

Hach

Hach Polymetron 9582sc Manual rápido

Hach

Hach Sigma 950 Manual de usuario

Hach

Hach Surface Scatter 7 sc Manual de usuario

Hach

Hach 9586sc Manual rápido

Hach

Hach ORBISPHERE 410 Manual de usuario

Hach

Hach TL2300 Manual rápido

Hach

Hach LANGE Pocket Colorimeter II Manual de usuario

Hach

Hach AF7000 Manual rápido

Hach

Hach 5410001 Manual de usuario

Hach

Hach sension ph31 Manual de usuario

Hach

Hach ISENA381 Series Manual de usuario

Hach

Hach POCKET COLORIMETER II Manual de usuario

Hach

Hach CL17sc Manual de usuario

Hach

Hach POCKET COLORIMETER II Manual rápido

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario

Hach sensION3 Guía de referencia

Manuales populares de Instrumento de medición de otras marcas