Goldair GMH325 Manual de usuario

OperatingInstructions

Model: GMH325

2400W Electronic Micathermic Heater

This page is intentionally left blank

CAUTION: In order to avoid a hazard due to inadvertent resetting of the

thermal cut-out, this appliance must not be supplied through an external

switching device, such as a timer, or connected to a circuit that is regularly

switchedonandoff by the utility.

•This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities or lack of experience and

knowledge, unless they are supervised or have been given instruction

concerningthe use of the appliance byaperson responsible fortheirsafety.

•Children should be supervised to ensure that they do not play with the

appliance.

•If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent orsimilarlyqualified persons inorderto avoida hazard.

WARNING: You must not cover this appliance. Covering this appliance

presents fire risk and will activate the safety fuse; permanently disabling the

unit.

WARNING: Do not use this appliance in small rooms when they are

occupied by persons not capable of leaving the room on their own, unless

constantsupervision isprovided.

WARNING: To reduce the risk of fire, keep textiles, curtains, or any

flammable material aminimumdistanceof 1 metre fromthe air outlet.

General Care and Safety Guide

•Use only the voltage specified on the rating label of the appliance.

•Keep all objects at least 1 metre from the front, sides and rear of the

appliance.

•This appliance is intended for household use only and not for commercial or

industrial use.

•Indoor use only.

•Use this appliance only as described in this manual. Any other use is not

recommended by the manufacturer and may cause fire, electric shock or

injury.

•Do not use the appliance if it has been dropped or damaged.

•The common cause of overheating is deposits of dust or fluff in the appliance.

Ensure these deposits are removed regularly by unplugging the appliance and

vacuum cleaning the air vents and grills.

YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE

INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.

•Never use the appliance to dry clothes.

•Always unplug appliance when not in use.

•When the appliance has been unpacked, check it for transport damage and

ensure all parts have been delivered. If parts are missing or the appliance has

been damaged, contact the Customer Services Team.

•Do not use if there are visible signs of damage to the appliance.

•Do not connect the appliance to mains supply until completely assembled and

adjusted.

•Ensure hands are dry before handling the plug or main unit.

•Ensure appliance is on a flat, stable, heat-resistant surface.

•Do not operate with cord set coiled up as a heat build up is likely, which could

be sufficient to become a hazard.

•Carry out regular checks of the supply cord to ensure no damage is evident

•Do not operate this appliance with a damaged cord, plug or after the appliance

malfunctions or has been dropped or damaged in any manner. Take to a

qualified electricalperson for examination, electrical service or repair.

•Do not twist, kink or wrap the cord around the appliance, as this may cause the

insulation to weaken and split. Always ensure that all cord has been removed

from any cord storage area and is unrolled before use.

•It is recommended that this appliance is plugged directly into the wall socket.

Power boards are not rated to supply power to high wattage appliances.

•A correctly specified, undamaged extension cord may be used with this

appliance provided it is used in a safe manner.

•Do not remove plug from power socket until the appliance has been switched

off.

•Do not remove plug from power socket by pulling cord; always grip plug.

•Do not place cord under carpet or cover with rugs or furniture. Arrange the cord

so it cannot be tripped over.

•Don’t place appliance on bedding or on thick & long carpet where the openings

may get blocked.

•Switch off and use handle provided when moving

•Do not place appliance close to radiant heat source.

•Do not insert or allow foreign objects to enter any ventilation or exhaust

opening, as this may cause an electric shock, fire or damage to the appliance.

•Do not sit on the appliance.

•Do not use abrasive cleaning products on this appliance. Clean with a damp

cloth (not wet) rinsed in hot soapy water only. Always remove plug from the

mains supply before cleaning.

•Do not operate in areas where petrol, paint or other flammable liquids are used

or stored.

•Do not use this appliance in the immediate surrounds of a bath, a shower, or a

swimming pool or other liquids.

General Care and Safety Guide

WARNING!

DANGER IF SWALLOWED

Keep batteries out of reach of

children. Swallowing may lead to

serious injury or death in as little

as 2 hours due to internal burns.

If swallowed, go straight to a

hospital emergency room.

Dispose of used batteries

immediately.

General Care and Safety Guide

The remote control supplied with thisappliance uses aCR2025 coin type battery.

DANGER IF SWALLOWED

Keep batteries out of reach of children. Swallowing may lead to serious injury or

deathin as little as 2hoursdue to internal burns.

If swallowed, go straight toa hospital emergency room.

Dispose of used batteriesimmediately.

•Do not locate the heater immediately below a socket-outlet.

•The appliance must not be immersed in any liquids.

•There are no user serviceable parts installed in the unit.

•Do not place the unit in wardrobes or other enclosed spaces as this may cause

fire hazards.

•This unit is not supposed to be used in or around locations where foodstuffs,

works of art or delicate articles of science, etc. are stored.

•If your appliance does not work, or is not working properly, contact the place of

purchase or the Customer Services Team.

ASSEMBLY INSTRUCTIONS

1. Carefully turn the Main Body upside-down on a scratch-free and stable surface.

Be careful to prevent damage to the cosmetic finish or your floor surfacing.

2. Attached the feet to the bottom of the heater with the more rounded end of the

foot to the front of the heater.

3. Turn the heater the right way up.

Foot x 2

Main Body x 1

Remote x 1

Before using this appliance, it must have the feet fitted.

WARNING:Heatermustnot be used withoutthe feet

This appliance has been supplied with ‘1 way screws’ for permanent

installation of the feet. Thisisasafetyrequirementforthe NewZealand and

Australian market.

Assembly Instructions

Operating Your Heater

Always choose a safe location for the heater, keeping in mind the safety precautions

outlined. Ensure all packaging has been removed from the unit before use. Please

follow the below instructions.

WARNING:In orderto avoid overheating orfire, do notcoverthe heater.

WARNING: Keep all objects at least 1 metre from the front, sides and rear

of the appliance.

WARNING: Do not use this heater with a programmer, separate timer,

remote-control system or any other device that switches the heater on

automatically, since a fire risk exists if the heater is covered or positioned

incorrectly.

WARNING:Never leave this heater unattended when inuse.

Ensure heaterison a flat, stable, heat-resistant surface.

Once the heater is in a safe operating position and all switches are in the off

position, insert the power plug into the mains outletand switch on.

CAUTION: Ensure the power cord is not tight because if pulled it may

partially pull the plug from the socket. A partially inserted plug will overheat

the plugand socketandcouldresult infire.

Note: When the appliance is turned on for the first time, it may release a

slight odour or smoke. This odour or smoke is a normal occurrence caused by

the initial heatingof the heating elements and should not occuragain.

Operating Your Heater

HEAT CONTROL SWITCH

•Check that the heat control switch at the back of the heater is

set to Off position before plugging the heater in and turning on

the mains supply.

•Turn the Power Switch at the back of the heater to the “I”

position. The heater will go into ‘Standby’ setting. @ ‘Dashes”

will bedisplayed on the control panel screen.

CONTROL PANEL

•Press the Power button on the control panel to turn the heater

on, the unit will begin on High Heat.

•The LED will display the current room temperature and the ‘H’

(high) power setting and the ‘H’ indicator will belit.

•Press the ‘MODE’ button and the heater will reduce to operate

in‘M’ (medium) heat setting.

•Press the “MODE’ button again and the heater will operate in ‘L”

(low) heat setting.

•The corresponding indicator light will display on the control

panel screen.

THERMOSTAT

Press the ‘+’ or ‘-’buttons to adjust the temperature to your desired

setting (from 15-45°C). Once you have set the desired temperature,

the LED will display the room temperature again and will rise as the

room temperature increases.

To find your preferred heat setting, set the thermostat to the

maximum setting. When the room reaches a comfortable

temperature for you, look atthe temperature reading on the heater

and then set the heater to this temperature. The heater will now

cycleon and off to maintain the set temperature.

NOTE: the temperature is read from a thermostat in the heater, for

a more accurate reading, position a separate thermometer in

another part of the room.

NOTE: This heater has a safety tip-over switch. If the heater is

knocked over or tipped more than 15 degrees it will shut off and

when put back into the upright position it will have reverted to

Standby setting.

Operating Your Heater

TIMER

Press the button then use the ‘+’ or ‘-’buttons to adjust the length of time

from 1–24 hours that you would like the heater to run for before turning off.

Each press of the ‘+’ or ‘-’button will adjust the length of time by 1 hour

increments.

To turn off the Timer function, set the Timer back to ‘0’hours or simply turn the

unitoff.

REMOTE CONTROL

The remote will operate all of the controlsthe same as the control panel.

The remote control receiverisonthe side of the heaterunderthe control panel.

Thisremote requiresaCR2025 battery.

SUPPORT AND TECHNICAL ADVICE

Goldair –New Zealand

Monday –Friday 8am-5pm

Phone +64 (0)9 917 4000

Phone 0800 232 633

info@cdb.co.nz

Goldair –Australia

Monday –Friday 8am-5pm

Phone +61 (0)3 9365 5100

Phone 1300 465 324

info@cdbgoldair.com.au

Operating Your Heater

TECHNICAL SPECIFICATION

Model No: GMH325

Supply: 230-240VAC 50Hz

Wattage: 2100-2400W

SAFETY DEVICES

This appliancehas three protection devices:

•Tilt switch - this will automatically turn the appliance off if the appliance is not in

the correct operatingposition.

•Resettable thermal link - this will automatically disconnect the power to the

appliance at a pre-set overheat temperature. After cooling down it will reset and

power on again. If this occurs, investigate what is causing the appliance to

overheat.

•Thermal fuse - this disconnects the appliance permanently in case of overheating.

(It is non resettable).

CAUTION: The appliance generates heat during use. Precautions must be

takento prevent the risk of burns, scalds, fires orotherdamage topersons.

CARE AND CLEANING

The heater requires regular cleaning to ensure trouble free operation:

•Unplug the heater from the mains supply before cleaning.

•Ensure that the heater has been allowed to cool down completely before cleaning.

•The common cause of overheating is deposits of dust or fluff in the appliance.

Ensure these deposits are removed regularly by unplugging the appliance and

vacuum cleaning the air vents and grills.

•Use a damp cloth (not wet) to wipe the exterior of the heater to remove dust and

dirt.

•Never usesolutions such as petrol,thinners or polishing agents.

•Ensure the heater is dry before pluggingback into the mains supply.

•Do not attempt to dismantlethe appliance.

•There are no user serviceable parts. For service or repair, contact an authorised

electrical servicetechnician.

PROOF OF PURCHASE

To receive warranty retain receipt as proof of purchase.

Tabla de contenidos

Otros manuales de Calentador de Goldair

Goldair

Goldair GCT260 Manual de usuario

Goldair

Goldair PLATINUM GPPH770 Manual de usuario

Goldair

Goldair GCH320 Manual de usuario

Goldair

Goldair GCW220 Manual de usuario

Goldair

Goldair GMH230 Manual de usuario

Goldair

Goldair GCH250B Manual de usuario

Goldair

Goldair GSCV150 Manual de usuario

Goldair

Goldair GCH315 Manual de usuario

Goldair

Goldair Select GSFH18 Manual de usuario

Goldair

Goldair GFH225 Manual de usuario

Goldair

Goldair GOC207TH Hoja de instrucciones

Goldair

Goldair GGPH205 Manual de usuario

Goldair

Goldair GMH225 Manual de usuario

Goldair

Goldair 3508W Manual de usuario

Goldair

Goldair GCV290B Manual de usuario

Goldair

Goldair PLATINUM GPCV330 Manual de usuario

Goldair

Goldair GFH267 Manual de usuario

Goldair

Goldair GPRH300 Manual de usuario

Goldair

Goldair GBH100 Manual de usuario

Goldair

Goldair GCT255 Manual de usuario

Goldair

Goldair GPH150 Manual de usuario

Goldair

Goldair GFH240 Manual de usuario

Goldair

Goldair GCW300 Manual de usuario

Goldair

Goldair GOC167T Manual de usuario

Manuales populares de Calentador de otras marcas

oventrop

oventrop Regucor Series Manual de usuario

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manual de usuario

ELMEKO

ELMEKO ML 150 Manual de usuario

BN Thermic

BN Thermic 830T Manual de usuario

KING

KING K Series Guía

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guía de inicio rápido

Well Straler

Well Straler RC-16B Manual de usuario

EUROM

EUROM 333299 Manual de usuario

Heylo

Heylo K 170 Manual de usuario

Eterna

Eterna TR70W Manual de usuario

Clarke

Clarke GRH15 Manual de instrucciones

IRSAP

IRSAP The Radiator Company Ovali Manual de usuario

Empire Heating Systems

Empire Heating Systems WCC65 Manual de usuario

Wetekom

Wetekom 92 86 43 Manual de usuario

Desa

Desa SPC170-F Manual de usuario

Watlow

Watlow Watrod Electric Tubular Heaters Manual de usuario

Haverland

Haverland ECO-DRY GPS Series Manual de lista de piezas

Stelpro

Stelpro ASILVC2060 Series Manual de usuario