Goldair PLATINUM GPCV330 Manual de usuario

CAUTION: In order to avoid a hazard due to inadvertent resetting of the

thermal cut-out, this appliance must not be supplied through an external

switching device, such as a timer, or connected to a circuit that is regularly

switched on and off by the utility.

•This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities or lack of experience and

knowledge, unless they are supervised or have been given instruction

concerning the use of the appliance by a person responsible for their safety.

•Children should be supervised to ensure that they do not play with the

appliance.

•If the supply cord is damaged, it must be replaced by the manufacturer, its

service agent or similarly qualified persons in order to avoid a hazard.

WARNING: You must not cover this heater. Covering this heater presents

fire risk and will activate the safety fuse; permanently disabling the unit.

WARNING: Do not use this heater in small rooms when they are occupied

by persons not capable of leaving the room on their own, unless constant

supervision is provided.

WARNING: To reduce the risk of fire, keep textiles, curtains, or any

flammable material a minimum distance of 1 metre from the air outlet.

General Care and Safety Guide

•Use only the voltage specified on the rating label of the appliance.

•The heater must not be located immediately below a socket outlet.

•Keep all objects at least 1 metre from the front, sides and rear of the appliance.

•This appliance is intended for household use only and not for commercial or industrial use.

•Indoor use only.

•Use this appliance only as described in this manual. Any other use is not recommended by

the manufacturer and may cause fire, electric shock or injury.

•Do not use the heater if it has been dropped or damaged.

•The common cause of overheating is deposits of dust or fluff in the appliance. Ensure these

deposits are removed regularly by unplugging the appliance and vacuum cleaning the air

vents and grills.

•Always unplug appliance when not in use.

•When the appliance has been unpacked, check it for transport damage and ensure all parts

have been delivered. If parts are missing or the appliance has been damaged, contact the

Customer Services Team.

•Do not use if there are visible signs of damage to the heater.

YOUR SAFETY IS IMPORTANT TO US. PLEASE ENSURE YOU TAKE NOTE OF THE

INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.

•Never use the appliance to dry clothes.

•Do not connect the appliance to mains supply until completely assembled and adjusted.

•Ensure hands are dry before handling the plug or main unit.

•Ensure heater is on a flat, stable, heat-resistant surface.

•Do not operate with cord set coiled up as a heat build up is likely, which could be sufficient to

become a hazard.

•Carry out regular checks of the supply cord to ensure no damage is evident

•Do not operate this appliance with a damaged cord, plug or after the appliance malfunctions

or has been dropped or damaged in any manner. Return to a qualified electrical person for

examination, electrical service or repair.

•Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation to

weaken and split. Always ensure that all cord has been removed from any cord storage area

and is unrolled before use.

•It is recommended that this heater is plugged directly into the wall socket. Power boards are

not rated to supply power to high wattage appliances.

•A correctly specified, undamaged extension cord may be used with this heater provided it is

used in a safe manner.

•Do not remove plug from power socket until the appliance has been switched off.

•Do not remove plug from power socket by pulling cord; always grip plug.

•Do not place cord under carpet or cover with rugs or furniture. Arrange the cord so it cannot

be tripped over.

•Don’t place appliance on bedding or on thick & long carpet where the openings may get

blocked.

•Switch off and use handle provided when moving

•Do not place appliance close to radiant heat source.

•Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may

cause an electric shock, fire or damage to the appliance.

•Do not sit on the appliance.

•Do not use abrasive cleaning products on this appliance. Clean with a damp cloth (not wet)

rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.

•Do not operate in areas where petrol, paint or other flammable liquids are used or stored.

•Do not use this appliance in the immediate surrounds of a bath, a shower, or a swimming

pool or other liquids.

•The appliance must not be immersed in any liquids.

•There are no user serviceable parts installed in the unit.

•Do not place the unit in wardrobes or other enclosed spaces as this may cause fire hazards.

•This unit is not supposed to be used in or around locations where foodstuffs, works of art or

delicate articles of science, etc. are stored.

•If your appliance does not work, or is not working properly, contact the place of purchase or

the Customer Services Team.

General Care and Safety Guide

SCREW PACK

8 x SCREWS including 2 x ONE

WAY SCREWS TO ATTACH

FEET

WALL MOUNTING

6 x LONG SCREWS

4 x WALL PLUGS

Components

FEET x 2

CONTROL PANEL

HEAT OUTLET

AIR INLET

(BACK)

MAIN POWER SWITCH

FREE STANDING

1. Ensure the appliance is unplugged and power switches are

off.

2. Carefully turn the Main Body upside-down on a scratch-free

and stable surface. Be careful to prevent damage to the

cosmetic finish or your floor surfacing.

3. Align the screw hole on the Feet Bracket with the screw hole

on the base of the appliance.

4. Attach feet with the screws provided and ensure the bracket

sits firmly in place (do not over tighten).

5. Set appliance upright and plug into a standard 240 volt AC

electrical outlet.

Assembly and Installation

Before using this appliance, it must either be wall mounted or have the feet fitted.

The screw pack to attach the feet to your appliance will be taped to either one of the

feet for your appliance, or taped to the plug.

WALL MOUNTED

1. Make sure the appliance is unplugged and

power switches are off.

2. Position the panel appliance within one metre

of a wall socket. Do not mount in front of or

below the wall socket. Ensure there is at least

100mm clearance on all sides of the

appliance.

3. Assemble the bracket with the screws

provided –see image 1.

4. Position the mounting screws on the wall per

below mounting guide and check they are

horizontal with a spirit level. Ensure the

bottom of the heater is at least 100mm from

the floor and drill holes as required. Fix the

bracket to the wall.

5. Slot the back of the appliance onto the

mounting screws. The bottom mount is on

there to keep the heater at the correct

distance from the wall. You do not need to

put a screw in the bottom mount.

6. Plug appliance into a standard 240 volt AC

electrical outlet.

Assembly and Installation

Before using this appliance, it must either be wall mounted or have the feet fitted.

The screw pack to attach the feet to your appliance will be taped to either one of the

feet for your appliance, or taped to the plug.

NOTE: Your Goldair Panel Heater should be installed with at least 100mm clearance from the

floor and any other surrounding parts including other appliances, side walls and soft

furnishings. There must be at least 1m clearance from the top of the heater to ceilings or

shelves.

WARNING: Do not run the power cord behind the heater.

WALL MOUNTED HEATERS ARE ONLY TO BE MOUNTED ON WALLS THAT

COMPLY WITH CURRENT AS/NZS SPECIFICATIONS & BUILDING REGULATIONS

Operating Your Heater

Always choose a safe location for the heater, keeping in mind the safety precautions

outlined. Ensure all packaging has been removed from the unit before use. Please follow

the below instructions.

WARNING: In order to avoid overheating or fire, do not cover the heater.

WARNING: Keep all objects at least 1 metre from the front and 150mm

from the sides of the appliance.

WARNING: Do not use this heater with a programmer, separate timer,

remote-control system or any other device that switches the heater on

automatically, since a fire risk exists if the heater is covered or positioned

incorrectly.

WARNING:Never leave this heater unattended.

Ensure heater is mounted on a heat-resistant surface.

Once the heater is in a safe operating position and all switches are in the off

position, insert the power plug into the mains outlet.

CAUTION: Ensure the power cord is not tight because if pulled it may

partially pull the plug from the socket. A partially inserted plug will overheat

the plug and socket and could result in fire.

Operating Your Heater

HEATER CONTROL PANEL

1–Display

2–Temperature

3–Heat Setting

4–Timer

5–Power

Ensure the power switch is in the OFF position before plugging unit in.

WARNING: Do not use this heater until it is fully assembled according to

the free standing or wall mounting instructions within this manual.

OPERATION

Plug in the unit and switch on the main power switch. The power indicator will light up.

Press the Power button (5) to turn the unit on. The current room temperature will be

displayed.

HEAT SETTING

Press the Heat Setting button (3) to change between Low and High power.

SETTING THE TEMPERATURE

Press the Temperature button (2) to select the desired temperature from 15-35C. Each press of

the button will increase the temperature by 1 degree until it reaches 35 degrees and then it

will start at 15 degrees again. After a few seconds the display will return to showing the current

room temperature.

SETTING THE TIMER

Press the Timer button (4) to set timer. The set time is displayed. Press the Timer button to

increase the timer in one hour increments. The timer has a range of 0-24 hours. The unit will

turn off once the timer completes its countdown.

WiFi –Downloading and Setting up APP

This APP is supported only on 2.4GHz Wi-Fi channels. Please ensure your phone is 2.4GHz

capable

Note this heater will only work within your home WIFI system.

This does not operate on 3G or 4G internet connections.

You will need a connection to your home Wi-Fi.

•Select your country code

•Enter your cellphone number

•Tap “Next”

You will then receive a text message with a verification

code.

Tap REGISTER near the bottom of the screen.

Download Goldair mobile APP

•Open the APP Store or Google Play on your mobile phone.

•Open “Search” and enter “Goldair"

•Click “GET” and begin to download and install.

Once downloaded to your phone open the APP

WiFi –Downloading and Setting up APP

•Enter the verification code from your text message

•Create a password.

•Then tap confirm.

If you haven’t received a verification code via text

message. Tap the resend button and when the

verification code is received follow above steps.

Your APP is now registered and ready for pairing to your

heater.

Pairing APP to Heater

Turn the main power switch which is on the right hand side of the appliance at the back to turn the heater on. The

heater will beep once and will be stand by mode.

Press the Power button (5) on the heater. A beep will sound indicating the heater is now on and the current

temperature will be displayed on the screen.

Pairing APP to Heater

On your phone tap “ADD DEVICE” to connect to the heater.

Press the Heat Setting button for 5 seconds until the green

WiFi symbol starts flashing.

Tap ‘Next Step” on the phone.

WiFi Symbol

Heat Setting

Button

Otros manuales para PLATINUM GPCV330

Tabla de contenidos

Otros manuales de Calentador de Goldair

Goldair

Goldair GOC155 Manual de usuario

Goldair

Goldair GOC177C Instrucciones de instalación

Goldair

Goldair PLATINUM GPOC3310 Manual de usuario

Goldair

Goldair Select GSOC117T Manual de usuario

Goldair

Goldair GCT250 Manual de usuario

Goldair

Goldair GECO250 Manual de usuario

Goldair

Goldair GMH200 Manual de usuario

Goldair

Goldair GBH450 Manual de usuario

Goldair

Goldair GPOC418 Manual de usuario

Goldair

Goldair Platinum GPPH620 Manual de usuario

Goldair

Goldair GCT260 Manual de usuario

Goldair

Goldair GCT330 Manual de usuario

Goldair

Goldair GPH110 Manual de usuario

Goldair

Goldair Platinum Series Manual de usuario

Goldair

Goldair GMH230 Manual de usuario

Goldair

Goldair GFH240 Manual de usuario

Goldair

Goldair GPH150 Manual de usuario

Goldair

Goldair GCW300 Manual de usuario

Goldair

Goldair SFH7000 Manual

Goldair

Goldair 3508W Manual de usuario

Goldair

Goldair GCH240 Manual de usuario

Goldair

Goldair Platinum GPOC4310 Manual de usuario

Goldair

Goldair Select GSCT100 Manual de usuario

Goldair

Goldair GOC167T Manual de usuario

Manuales populares de Calentador de otras marcas

oventrop

oventrop Regucor Series Manual de usuario

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manual de usuario

ELMEKO

ELMEKO ML 150 Manual de usuario

BN Thermic

BN Thermic 830T Manual de usuario

KING

KING K Series Guía

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guía de inicio rápido

Well Straler

Well Straler RC-16B Manual de usuario

EUROM

EUROM 333299 Manual de usuario

Heylo

Heylo K 170 Manual de usuario

Eterna

Eterna TR70W Manual de usuario

Clarke

Clarke GRH15 Manual de instrucciones

IRSAP

IRSAP The Radiator Company Ovali Manual de usuario

Empire Heating Systems

Empire Heating Systems WCC65 Manual de usuario

Wetekom

Wetekom 92 86 43 Manual de usuario

Desa

Desa SPC170-F Manual de usuario

Watlow

Watlow Watrod Electric Tubular Heaters Manual de usuario

Haverland

Haverland ECO-DRY GPS Series Manual de lista de piezas

Stelpro

Stelpro ASILVC2060 Series Manual de usuario