GeoVision GV-APOE0811 Manual de usuario

March 8, 2021

GV-APOE0811 8-Port Gigabit 802.3at Web Management

PoE Switch

Packing List

1. GV-APOE0811 x 1

2. Power Cord x 1

3. Screw x 8

4. Rack Mount Kit

5. Rubber Feet x 4

6. GV-TA (1000Base-T Copper RJ-45 SFP

Transceiver) x 1

Front Panel

Note: If any of these items is found missing or damaged, please contact your local supplier

for replacement.

LED

Display

Gigabit

RJ-45

Gigabit

SFP

Reset

Button

Not

Functional

March 8, 2021

LED Indicators on the switch

LED Color/Status Description

PW Green System powered on.

SYS Blinking Green System is working.

Red Network through the corresponding port has been

successfully established at 10/100 Mbps.

Green Network through the corresponding port has been

successfully established at 1000 Mbps.

Link/Act

Blinking Red / Green Data currently being sent through the corresponding port

at 10/100 (orange) or 1000 (green) Mbps.

PoE Orange At least one device successfully powered through PoE.

Rear Panel

March 8, 2021

Mount Installation

Desktop

Rack

March 8, 2021

Connecting to GV-IP Cameras / Systems / Switches

GV-APOE0811 can be connected to up to 8 GV-IP Cameras and 2 GV-NVR / DVR / VMS

Systems or switches. You can also extend the connections by connecting to other switches.

Note:

1. The maximum cable length for:

•

Gigabit RJ-45 (Cat5) is 100 m (330 ft).

•

Gigabit RJ-45 (Cat5e or higher) can achieve 250 m (820 ft) by selecting Auto-10M or

10M for speed on the device’s Web interface. See details in Figure 16, 2.3.1 Port

Setting,GV-PoE Switch User’s Manual.

2. For connection that exceeds 250 m (820 ft), you can use the Gigabit SFP ports.

3. The supplied GV-TA (1000Base-T Copper RJ-45 SFP Transceiver) only supports

Gigabit Ethernet over Cat5e / Cat6 cable.

4. The port inserted with the GV-TA will not function if connected to a network speed of 10

Mbps or 100 Mbps.

March 8, 2021

Accessing Web Interface

Users can log in the Web interface to manage and set up the switch. Follow the below steps

to log in the Web interface.

1. To access the Web user interface, type the default IP 192.168.0.250 into your Web

browser. The login page appears.

2. Type the default username admin and password admin.Click Login In.

3. When prompted to create your login credentials, type the necessary information and click

Apply. The System Information window appears.

4. To configure the GV-PoE Switch, select desired functions from the left menu.

Loading Default Setting

You can load the default value with the Reset button or with the Web interface.

Hardware

1. Turn on the switch.

2. Press and hold the Reset button on the front panel of the switch for 5 seconds until all

the LED start blinking.

3. Release the button. The switch is restored to its default settings.

March 8, 2021

Web Interface

1. Management > Configuration > Save Configuration.

2. Click Restore Factory Default to restore the switch to the original configuration.

Note: After loading default by pressing the Reset button or from the Web interface, you will

need to configure IP address and Password again.

Updating Firmware

1. Management > Firmware > Upgrade/Backup.

2. Select Upgrade in the Action section.

3. Select TFTP or HTTP in the Method section.

If TFTP is selected, select Hostname / IPv4 / IPv6 in the Address Type section >

specify the TFTP server address.

If HTTP is selected, click Browse to select the firmware file.

4. Click Apply. The upgrade process is started.

5. After the firmware is successfully upgraded, click Logout from the left menu and re-login

the switch.

Specifications

For detailed specifications, see Datasheet.

Tabla de contenidos

Otros manuales de Cambiar de GeoVision

GeoVision

GeoVision GV-POE2411 Manual de usuario

GeoVision

GeoVision GV-APOE0410-E Manual de usuario

GeoVision

GeoVision GV-POE2411 Manual de usuario

GeoVision

GeoVision GV-APOE0810 Manual de usuario

GeoVision

GeoVision GV-APOE4813 Manual de usuario

GeoVision

GeoVision GV-APOE1611 Manual de usuario

GeoVision

GeoVision GV-POE0800 Manual de usuario

GeoVision

GeoVision GV-POE0811-V2 Manual de usuario

GeoVision

GeoVision GV-POE0410-E Manual de usuario

GeoVision

GeoVision GV-PoE Manual de usuario

GeoVision

GeoVision GV-POE1611 Manual de usuario

GeoVision

GeoVision GV-POE0410-E-V2 Manual de usuario

GeoVision

GeoVision GV-APOE0400 Manual de usuario

GeoVision

GeoVision GV-POE2401-V2 Manual de usuario

GeoVision

GeoVision GV-APOE4813 Manual de usuario

GeoVision

GeoVision GV-POE1611-V2 Manual de usuario

GeoVision

GeoVision GV-APOE4813 Manual de usuario

GeoVision

GeoVision GV-POE2411 Manual de usuario

GeoVision

GeoVision GV-POE2411-V2 Manual de usuario

GeoVision

GeoVision GV-APOE0400 Manual de usuario

GeoVision

GeoVision GV-POE1601 Manual de usuario

GeoVision

GeoVision GV-POE0811 Manual de usuario

GeoVision

GeoVision GV-POE0812 Manual de usuario

GeoVision

GeoVision GV-POE0801 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario