Genie GEBV series Manual de usuario

GEBV SERIES

User Manual

Contents

1Notes .........................................................- 1 -

2Product Introduction .................................- 2 -

2.1Production Instruction..................................... - 2 -

2.2Product Feature.................................................. - 2 -

3Product Structure ......................................- 3 -

4Technical Parameters ................................- 6 -

5- 7 -

6Product Installation ...................................- 8 -

6.1Note ........................................................................ - 8 -

6.2Installation Tools and Information ............. - 8 -

6.3Installation Method........................................... - 8 -

6.4Connection ........................................................... - 10 -

Appendix: FAQ .................................................- 11 -

OSD Menu tree ...........................................

- 1 -

1Notes

Read this manual carefully before use.

1)To reduce the risk of electric shock, do not open the machine and

maintain by yourself, please consult a professional service person.

2)To prevent fire or shock hazard, use the power after safety

certification, the input voltage, current, voltage polarity and

operating temperature must meet the requirements of this camera.

3)Please note the operating temperature and environmental

requirements of the camera, avoid too low or too high temperature.

General operating temperature range of -10℃～+50℃(Fahrenheit

temperature is 14℉～122℉). Avoid flooding and rain, minimize dust

and moisture erosion, otherwise camera would be damaged.

4)Cameras in use should avoid direct sunlight, glare, otherwise the

sensor will be damaged.

5)Do not touch the sensor surface, if any foreign objects exits, a

cotton swab or lens paper can be used to wipe, if it is difficult to

remove, a neutral detergent diluted with water would be useful. Do

not use corrosive solution.

7)In order to make the camera work smoothly and obtain a

satisfactory image, the power cord and video connection can not be

too long, otherwise the increase of line loss will lead to the

inadequate magnitude of the operating voltage of the camera or

video signal Inadequate.

8)In order to prevent the camera from falling, please do not place

the camera on an unstable bracket, base or other unstable objects.

Otherwise it will lead to injury, at the same time, the camera will be

damaged.

9)The camera cannot be placed near the radiator or heating resistor.

- 2 -

2Product Introduction

2.1 Production Instruction

This series of cameras are adopted CMOS image sensor with

high performance, which provides mega pixel resolution and

supports HD video. Moreover, it supports monitoring signals coaxial

transmission. Transmission distance can reach more than 300M

based on 75-3 coaxial cable. The series can support both TVI/CVBS

960H output as well as realize high speed, long distance and real

time video transmission.

2.2 Product Feature

1.1/2.7“ 2M CMOS Sensor

2. AHD 1080P 25fps/30fps

3. HDCVI,HDTVI,AHD,CVBS format output

4. Low Illumination ，

0.01LUX@(F1.2,AGC ON)

5. Auto Whitebalance

6. Auto Eletronic Shutter

7. Auto Gain Control

8. 2DNR

9. DWDR

10. English , Chinese,Spanish,Italian OSD menu

- 3 -

3Product Structure

The followings are the dimensions of some products. No further

notice for the upgraded version.

Photo 3-1 Indoor Dome Camera

Photo 3-2 Indoor IR Dome Camera

- 4 -

Photo 3-3 Outdoor IR Dome Camera

Photo 3-4 Outdoor Vari-focal Dome Camera

Photo 3-5 Outdoor IR Bullet Camera

- 5 -

Photo 3-6 Outdoor Vari-focal Bullet Camera

Photo 3-7 Outdoor Vari-focal Bullet Camera

- 6 -

4Technical Parameters

Signal System NTSC / PAL

Image Sensor 1/2.7“ 2MP CMOS Sensor

Active array size 1936(H) x 1096(V)

Synchronization Internal synchronization

Video OutPut CVI,TVI ,AHD (1080P@25fps, 1080P@30fps)

CVBS (1280x576 , 1280x480)

S/N Ratio 39dB(AGC OFF)

Min.Illumination Color：0.1Lux@(F1.2，AGC ON)

B&W：0.01Lux@(F1.2，AGC ON)

Day & Night Ext / Auto / Color / B&W

White Balance Auto / Manual

NR 2DNR

DWDR On / Off

Shutter Auto

AGC Auto

OSD English / Chinese / Spanish / Italian

Spe

cific

ation

Working

Temperature/Humidity

-10℃~60℃，Humidity 90% or less (non-

condensing)

Storage Temperature -20℃~+60℃

Power Supply DC12V±10%

- 7 -

5OSD Menu tree

MAIN MENU

SECOND MENU

AE BRIGHTNESS 1～20

EXPOSURE

MODE

GLOBE

CENTER

BLC LV 1~8

FLC

RETURN

WB MODE ATW

MWB RGIAN 1～16

BGAIN 1～16

RETURN

DAY-NIGHT MODE EXT / AUTO / COLOR / B&W

RETURN

VEDIO SETTING CONTRAST 1～10

SHARPNESS 1～20

COLOR GAIN 1～20

DNR 1～15

FORMAT PAL / NTSC

DWDR ON / OFF

RETURN

LANGUAGE ENGLISH

CHINESS

SPANISH

ITALIAN

RESET

SAVE & EXIT

EXIT

- 8 -

6Product Installation

6.1 Note

1) Make sure the unit is powered off before installation.

2) Check power supply voltage consistent with the electric

voltage to prevent voltage unworthy, resulting in damage to

the device.

3) Do not use in the environment beyond the boundaries of the

temperature, and maintain good ventilation to prevent the rain

in order to reduce the risk of fire or electric shock.

4) The installation and maintenance of this product should be

professional, please do not in any way to remove or modify the

equipment; can only use the required accessories of

manufacturers. Problems caused by unauthorized repair are at

your own risk.

6.2 Installation Tools and Information

Prepare the required engineering data and instructions. Before

installation please prepare the following tools and

instrumentation: A straight or a Phillips-head screwdriver,

multi-meter, scissors, needle nose pliers, tape measure, pencil

and so on.

6.3 Installation Method

1. Check the equipment whether it is damaged.

2. Mounting bracket or base.

①If the cement wall, install the expansion screws (expansion

screw holes need stand or base hole), and then mount

Tabla de contenidos

Otros manuales de Cámara de seguridad de Genie

Genie

Genie WIP6F Manual de usuario

Genie

Genie WIPX2LBVLPR Manual de usuario

Genie

Genie GAHD18IRPTZ Manual de usuario

Genie

Genie GAHDB21W Manual de usuario

Genie

Genie GS5360VDC Manual de usuario

Genie

Genie ZW49IR Manual de usuario

Genie

Genie COMPACT IR BULLET CAMERA Manual de usuario

Genie

Genie GIP5NCMIR Manual de usuario

Genie

Genie SSAHD2BVAF Manual de usuario

Genie

Genie WIPX4EBVAF Manual de usuario

Genie

Genie TPC 8922 Series Manual de usuario

Genie

Genie GSDNR-5355W Manual

Genie

Genie DSF120PX Manual de usuario

Genie

Genie PWIPNW4B Manual de usuario

Genie

Genie SSAHD2B Manual de usuario

Genie

Genie PWIP4BVAF Manual de usuario

Genie

Genie SSAHD2LBVAF Manual de usuario

Genie

Genie ZD2812IR Manual de usuario

Genie

Genie PWIP2BV Manual de usuario

Genie

Genie GIPW4NPIR Manual de usuario

Genie

Genie UMD300 Series Manual de usuario

Genie

Genie WIP2BVLG Manual de usuario

Genie

Genie TPIR-607 Series Manual de usuario

Genie

Genie PWIP4EBVAF Manual de usuario

Manuales populares de Cámara de seguridad de otras marcas

Okina USA

Okina USA SIR36-870VF650LP Manual de usuario

Divio

Divio NDR155PA Manual de usuario

Canon

Canon VB-C500D Manual de usuario

Easy Access

Easy Access EasyGuard Manual de usuario

Vivotek

Vivotek FD9389-EHV-v2 Manual de usuario

TUYA

TUYA COSMO W2 Manual de usuario

Eusso

Eusso UNC7500-IR Guía de configuración

urmet domus

urmet domus 1096/204 Manual de usuario

VC VC20 series Manual de usuario

Axis

Axis Q1614 Manual de usuario

ieGeek

ieGeek DD201 Manual de usuario

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manual de usuario

Vicon

Vicon V662-D-1 Instrucciones de funcionamiento

Grundig

Grundig GCH-K0274P Manual de usuario

Lorex

Lorex VANTAGE LBC7032 Manual de usuario

4xem

4xem WPT Manual de usuario

Samsung

Samsung SCV-3082 Manual de usuario

Vitek

Vitek VTC-C544 Manual de usuario