Generac Power Systems Generator Manual de usuario

Otros manuales para Generator

2

Tabla de contenidos

Otros manuales de Inversor de Generac Power Systems

Generac Power Systems

Generac Power Systems 15 kW EcoGen Manual de usuario

Generac Power Systems

Generac Power Systems 7kW Air-cooled Manual de usuario

Generac Power Systems

Generac Power Systems 004709-0 Manual de usuario

Generac Power Systems

Generac Power Systems Guardian 04758-1 Instrucciones de instalación

Generac Power Systems

Generac Power Systems 005261-0 Manual de usuario

Generac Power Systems

Generac Power Systems 1276-1 Manual de usuario

Generac Power Systems

Generac Power Systems Guardian 04758-1 Manual de usuario

Generac Power Systems

Generac Power Systems PWRcell XVT076A03 Instrucciones de instalación

Generac Power Systems

Generac Power Systems GUARDIAN SERIES Guía de instalación

Generac Power Systems

Generac Power Systems 004703-1 Manual de usuario

Generac Power Systems

Generac Power Systems Magnum Series Manual de usuario

Generac Power Systems

Generac Power Systems Quietsource 004916-0 Manual de usuario

Generac Power Systems

Generac Power Systems Guardian 04758-2 Instrucciones de instalación

Generac Power Systems

Generac Power Systems 8 kW LP Manual de usuario

Generac Power Systems

Generac Power Systems Whisper-Test COMMERCIAL SERIES Manual de usuario

Generac Power Systems

Generac Power Systems ECOGEN 005818-0 Manual de instalación y operación

Generac Power Systems

Generac Power Systems 005210-0 Manual de usuario

Generac Power Systems

Generac Power Systems CorePower?/ES Generators Hoja de instrucciones

Generac Power Systems

Generac Power Systems ECOGEN SERIES Hoja de instrucciones

Generac Power Systems

Generac Power Systems PWRcell XVT076A03 Instrucciones de instalación

Generac Power Systems

Generac Power Systems 005914-0 Guía de instalación

Generac Power Systems

Generac Power Systems 0661-4 Manual de usuario

Generac Power Systems

Generac Power Systems 00784-2, 09290-4 Manual de servicio

Generac Power Systems

Generac Power Systems 00862-1 Instrucciones de instalación

Manuales populares de Inversor de otras marcas

Fourgroup

Fourgroup Easy Manual de usuario

Velleman

Velleman PI300M Manual de usuario

Sungrow

Sungrow SG350HX-US Manual de usuario

WilTec

WilTec 61897 Manual de usuario

SMA

SMA SUNNY BOY STORAGE 2.5 Manual de usuario

Simplicity

Simplicity LANDLORD 316 Manual de usuario

Santak

Santak SMAX 3000 Manual de usuario

ATON

ATON RA.Store-3 Manual de usuario

ZIEHL-ABEGG

ZIEHL-ABEGG FXET4AMQ Manual de usuario

Tektronix

Tektronix CFG250 Manual de usuario

Champion

Champion 200989 Manual de usuario

Vanner

Vanner 20-500 Series Manual de usuario

GE

GE GEP Manual de usuario

Astrel Group

Astrel Group Power Reducer Guía rápida

MULTIQUIP

MULTIQUIP GDP-5H Guía

GoWISE

GoWISE PS1007 Manual de usuario

Promate

Promate PM13500D ES Manual de usuario

Mastervolt

Mastervolt WHISPER 3.5M3000 RPM Manual de usuario

Protect Your

Investment

500 James St Unit 4 Lakewood, NJ 08701 732·367·8324

www.fortechgenerators.com

AUTHORIZED SALES AND SERVICE DEALER

AUTOMATIC STANDBY & PORTABLE GENERATORS

● 24/7 Emergency Service

● Priority service guaranteed

● Quick response assured

● Contact us anytime, even outside

● normal business hours

● 20% discount on labor for any

● generator repairs, outside warranty

● Experienced, factory trained

● technicians on staff

Congratulations

on your purchase of a Generac automatic standby generator – the

most dependable and advanced unit in the industry today. Sched-

uled maintenance is necessary to ensure your generator will run

properly at the time of need. Generac requires that service and

repairs are performed by a factory trained and authorized service

technician.

For-Tech Electric LLC of Lakewood, NJ, was established in 2009 to

service the surrounding area and provide residents with standby

power solutions. Our staff of knowledgeable, dedicated profes-

sionals take pride in providing outstanding, personalized service to

our customers and our community. The company is committed to

honesty, quality and professionalism. From its inception, For-Tech

Electric has been a Generac Authorized Dealer. Our courteous team

of technicians are factory trained by Generac Power Systems and

are certiﬁed in service and installations. We are also authorized to

perform warranty repairs.

For-Tech Electric is up-to-date on the latest product advances re-

garding the maintenance and repair of Generac’s standby genera-

tors. Only Generac original factory parts are used in our ﬁrst rate

service.

For-Tech Electric offers priority service and quick response time

guaranteed. We can be contacted anytime, even outside normal

business hours.

● 24/7 Emergency Service

● Priority service guaranteed

● Quick response assured

● Contact us anytime, even outside

● normal business hours

● 20% discount on labor for any

● generator repairs, outside warranty

● Experienced, factory trained

● technicians on staff

Congratulations

on your purchase of a Generac automatic standby generator – the

most dependable and advanced unit in the industry today. Sched-

uled maintenance is necessary to ensure your generator will run

properly at the time of need. Generac requires that service and

repairs are performed by a factory trained and authorized service

technician.

For-Tech Electric LLC of Lakewood, NJ, was established in 2009 to

service the surrounding area and provide residents with standby

power solutions. Our staff of knowledgeable, dedicated profes-

sionals take pride in providing outstanding, personalized service to

our customers and our community. The company is committed to

honesty, quality and professionalism. From its inception, For-Tech

Electric has been a Generac Authorized Dealer. Our courteous team

of technicians are factory trained by Generac Power Systems and

are certiﬁed in service and installations. We are also authorized to

perform warranty repairs.

For-Tech Electric is up-to-date on the latest product advances re-

garding the maintenance and repair of Generac’s standby genera-

tors. Only Generac original factory parts are used in our ﬁrst rate

service.

For-Tech Electric offers priority service and quick response time

guaranteed. We can be contacted anytime, even outside normal

business hours.

3 Part Operation Test

MANUAL TEST Generator is started manually and output is tested

and recorded.

SIMULATED POWER OUTAGE WITH AUTO TRANSFER UNDER LOAD Power

input to generator is interrupted. The generator will start, run, and transfer load.

Generator output voltage, frequency, and amps are tested and recorded. Power

input is then restored to the generator. Auto transfer back to utility and genera-

tor shut down are monitored.

EXERCISE TEST Generator exercise is set to current time. Generator will start

and run exercise. Proper engine speed will be noted and recorded. Exercise

time will then be reset to original schedule (digital displays only).

Tune Up

Air Cooled Generators up to 20 kW

OIL CHANGE – Generac 5w-30 synthetic oil (or comparable)

OIL FILTER CHANGE – Generac original part

AIR FILTER CHANGE – Generac original part

SPARK PLUGS – Inspect, clean, or replace

ENCLOSURE - Clean

Liquid Cooled Generators up to 48 kW

COOLANT - Top off

Air Cooled Generators up to 20 kW

AIR INTAKE - Check for particle buildup/blockage.

OIL - Verify proper level and purity.

FUEL LINES - Check for any corrosion and possible kinks.

ENCLOSURE - Inspect for rust and corrosion.

BATTERY - Check voltage and charge rate. Inspect terminals.

BASE - Level and stable.

ENGINE - Inspect for leaks, cracks, and loose ﬁttings.

INTERNAL PARTS - Check for rust and corrosion.

CONTROL PANEL - Check history for alarm and error codes.

TRANSFER SWITCH - Check for loose connections, blown fuses,

or any damage to the enclosure.

Liquid Cooled Generators up to 48 kW - 12 Point Inspection

COOLANT - Check for leaks and ensure proper level.

BELTS - Check for wear and cracks.

10 Point Inspection

3 Part Operation Test

MANUAL TEST Generator is started manually and output is tested

and recorded.

SIMULATED POWER OUTAGE WITH AUTO TRANSFER UNDER LOAD Power

input to generator is interrupted. The generator will start, run, and transfer load.

Generator output voltage, frequency, and amps are tested and recorded. Power

input is then restored to the generator. Auto transfer back to utility and genera-

tor shut down are monitored.

EXERCISE TEST Generator exercise is set to current time. Generator will start

and run exercise. Proper engine speed will be noted and recorded. Exercise

time will then be reset to original schedule (digital displays only).

Tune Up

Air Cooled Generators up to 20 kW

OIL CHANGE – Generac 5w-30 synthetic oil (or comparable)

OIL FILTER CHANGE – Generac original part

AIR FILTER CHANGE – Generac original part

SPARK PLUGS – Inspect, clean, or replace

ENCLOSURE - Clean

Liquid Cooled Generators up to 48 kW

COOLANT - Top off

Air Cooled Generators up to 20 kW

AIR INTAKE - Check for particle buildup/blockage.

OIL - Verify proper level and purity.

FUEL LINES - Check for any corrosion and possible kinks.

ENCLOSURE - Inspect for rust and corrosion.

BATTERY - Check voltage and charge rate. Inspect terminals.

BASE - Level and stable.

ENGINE - Inspect for leaks, cracks, and loose ﬁttings.

INTERNAL PARTS - Check for rust and corrosion.

CONTROL PANEL - Check history for alarm and error codes.

TRANSFER SWITCH - Check for loose connections, blown fuses,

or any damage to the enclosure.

Liquid Cooled Generators up to 48 kW - 12 Point Inspection

COOLANT - Check for leaks and ensure proper level.

BELTS - Check for wear and cracks.

10 Point Inspection

Service Options

1 Year Agreement

Air cooled generators up to 20 kW

Includes one annual visit in which we perform a 10 point inspection, 3 part

operational test, and annual tune up.

1 Year Agreement

Liquid cooled generators up to 48 kW

Includes one annual visit in which we perform a 12 point inspection, 3 part

operational test, and annual tune up.

3 Year Agreement

Air cooled generators up to 20 kW

Includes one annual visit in which we perform a 10 point inspection, 3 part

operational test, and annual tune up.

In addition, receive:

Annual tune up

Additional check up visit

Break-in oil change

3rd year battery replacement

3 Year Agreement

Liquid cooled generators up to 48 kW

Includes one annual visit in which we perform a 12 point inspection, 3 part

operational test, and annual tune up.

In addition, receive:

Annual tune up

Additional check up visit

Break-in oil change

3rd year battery replacement

3rd year coolant change

BUNDLE & SAVE!

Additional Services

1. Additional Check Up

10 Point Inspection

(12 Point Inspection for Liquid Cooled)

2. Break-In Oil Change

Units are shipped with a special lightweight

break-in oil. It is recommended that this oil is

changed after 10 hours of operation.

3. 3rd Year Battery Replacement

Done at time of annual tune up.

4. 3rd Year Coolant Change

Liquid cooled generators up to 48 kW

Done at time of annual tune up.

Service Options

1 Year Agreement

Air cooled generators up to 20 kW

Includes one annual visit in which we perform a 10 point inspection, 3 part

operational test, and annual tune up.

1 Year Agreement

Liquid cooled generators up to 48 kW

Includes one annual visit in which we perform a 12 point inspection, 3 part

operational test, and annual tune up.

3 Year Agreement

Air cooled generators up to 20 kW

Includes one annual visit in which we perform a 10 point inspection, 3 part

operational test, and annual tune up.

In addition, receive:

Annual tune up

Additional check up visit

Break-in oil change

3rd year battery replacement

3 Year Agreement

Liquid cooled generators up to 48 kW

Includes one annual visit in which we perform a 12 point inspection, 3 part

operational test, and annual tune up.

In addition, receive:

Annual tune up

Additional check up visit

Break-in oil change

3rd year battery replacement

3rd year coolant change

BUNDLE & SAVE!

Additional Services

1. Additional Check Up

10 Point Inspection

(12 Point Inspection for Liquid Cooled)

2. Break-In Oil Change

Units are shipped with a special lightweight

break-in oil. It is recommended that this oil is

changed after 10 hours of operation.

3. 3rd Year Battery Replacement

Done at time of annual tune up.

4. 3rd Year Coolant Change

Liquid cooled generators up to 48 kW

Done at time of annual tune up.

Protect Your

Investment

500 James St Unit 4 Lakewood, NJ 08701 732·367·8324

www.fortechgenerators.com

AUTHORIZED SALES AND SERVICE DEALER

AUTOMATIC STANDBY & PORTABLE GENERATORS