FVC PM0301B Manual de usuario

PRODUCTIMAGE

PM0301B

ProMaster Bed System

Installation Guide

FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576

All Flatline Van Co products must be properly assembled and secured before attaching to your

vehicle. Improper attachment could result in an automobile accident, and could cause serious bodily

injury or death to you or to others involved. You are responsible for assembling and securing Flatline

Van Co products to your vehicle, checking the mounting points and attachments prior to use, and

regularly inspecting the products for wear and or damage. We always recommend you use a

professional to install any aftermarket accessories to your vehicle. If you have no mechanical

experience and are not thoroughly familiar with the installation procedures, you must have the

product installed by a professional installer or other qualiﬁed persons. The responsibility is yours

and must be taken seriously for everyone's safety.

FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576

thanks.

FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576

THANK YOU!

ARE YOU EXCITED ABOUT YOUR NEW PROMASTER BED SYSTEM? HERE ARE A FEW

THINGS TO DO BEFORE BEGINNING THE INSTALLATION PROCESS--

• PLEASE INSPECT THE PRODUCT TO ENSURE THERE WAS NO

DAMAGE INCURRED DURING SHIPPING.

• IF THERE IS DAMAGE TO REPORT, PLEASE CONTACT OUR

CUSTOMER SERVICE DEPARTMENT AS SOON AS POSSIBLE.

• NEXT, USING THE “PACKAGE CONTENTS” PAGE, CHECK

INVENTORY AND FAMILIARIZE YOURSELF WITH THE PARTS

AND HARDWARE.

• GATHER ALL TOOLS REQUIRED FOR INSTALL.

-5/16 HEX KEY ALLEN WRENCH

ADDT’L TOOLS-

NON BRACKET INSTALL-

-POWER DRILL

-1/8” DRILL BIT

DIY BRACKET INSTALL-

-9/16” SOCKET OR WRENCH (IF L-TRACK INSTALLED)

-5/32 HEX KEY ALLEN WRENCH (FOR SUPPLIED DIY HARDWARE)

• IT’S RECOMMENDED TO HAVE A SECOND SET OF HANDS

WHEN INSTALLING THE BED RAILS TO HELP LEVEL THEM.

• YOU CAN INSTALL THIS BED USING SELF TAPPING SCREWS,

OR BY USING RIVNUTS (REQUIRE SEPARATE TOOL)

TOOLS

5/16 ALLEN KEY

5/32 ALLEN KEY

PACKAGE CONTENTS

FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576

PASSENGER SIDE BED RAIL

QTY - 1

DRIVER SIDE BED RAIL

QTY - 1

BED PANEL

QTY - 1

REAR BED PANEL

QTY - 1

HARDWARE PACK

FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576

3/8 SCREW CUSHION

WASHER

QTY - 4

3/8 SCREW FLAT WASHER

QTY - 4

3/8-16 X 1 SOCKET HEAD

HEX DRIVE SCREW

QTY - 4

FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576

LET’S GET STARTED!

NOTE- THE FLAME LOGO IS THE BACK OF THE BED RAIL AND FACES THE REAR OF

THE VAN.

DIY MOUNT HOLES

MEASURE TO THIS EDGE (PANEL ADDS 1.5”)

L-TRACK OR BED

BRACKET KIT MOUNT

SLOTS

FRONT REAR

THE BED RAILS HAVE MULTIPLE MOUNTING HOLES AND STYLES TO COVER A RANGE USER DETERMINED MOUNTING STYLES. BELOW IS

A DIAGRAM DETAILING THE BED RAIL. WE HAVE PROVIDED A LARGE AMOUNT OF 1/4” CLEARANCE HOLES (LABELED DIY MOUNT

HOLES) FOR USERS CHOOSING TO MOUNT THE BED RAIL DIRECTLY TO THE VAN CHASSIS, AND THESE ARE SIZED FOR A 1/4-20, M6, OR

#14 SELF DRILLING SCREW. WE RECOMMEND TEST FITTING YOUR RAILS TO THE WALL AT DESIRED HEIGHT, THEN INSERTING SOME SELF

TAPPING SCREWS TO HOLD IN PLACE WHILE INSERTING YOUR FINAL MOUNT HARDWARE, OR FOR DRILLING RIVNUT PILOT HOLES.

WE HAVE ALSO PROVIDED 4 SLOTS THAT FUNCTION WITH OUR DIY BED BRACKET KIT. THESE SLOTS ARE SIZED TO FIT STANDARD

L-TRACK ANCHORS, OR THEY WORK WITH THE 1’4-20 MOUNTING HARDWARE WE SUPPLY WITH THE DIY BED BRACKET KIT.

SEE PAGE 6 FOR DETAILS ON MOUNTING TO THE DIY BED BRACKET KIT, AND SEE PAGE 7 FOR DETAILS ON L-TRACK.

FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576

PLEASE REFER TO THE DIY BED BRACKET KIT INSTALLATION

MANUAL FIRST BEFORE ATTEMPTING TO INSTALL THE BED SYSTEM.

WITH THE BED BRACKET INSTALLATION YOU WANT TO HOLD THE

BED RAIL UP AT THE DESIRED HEIGHT (YOU CAN MARK WITH

PAINTERS TAPE TO DOUBLE CHECK IF PREFERRED) AND THEN

INSERT THE HARDWARE PROVIDED WITH THE DIY BED BRACKET KIT

AS SHOW IN THE IMAGE TO THE RIGHT. TIGHTEN DOWN AND REPEAT

ON BOTH SIDES.

NOTE- THE PROMASTER BED SYSTEM HAS A MOUNTING

WIDTH RANGE (THE DISTANCE BETWEEN YOUR WALL PANELS) OF

ROUGHLY 64” - 69.5” THIS MEASUREMENT WILL DETERMINE YOUR

MAXIMUM HEIGHT. DEPENDING ON YOUR WALL PANEL THICKNESS

YOU MAY NEED TO PURCHASE LONGER BOLTS. THE PROVIDED

HARDWARE WILL ALLOW UP TO A 3/8” THICK WALL PANEL (+FABRIC

ETC.)

MAKE SURE SPACER FROM DIY

BRACKET KIT SITS BEHIND

WASHER. THIS HEPS THE RAIL

SEAT CORRECTLY.

DIY BRACKET MOUNTING

FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576

IF YOU’VE INSTALLED L-TRACK ONTO YOUR DIY BED BRACKET KIT

(MORE INFO PROVIDED IN DIY BED BRACKET KIT INSTALL GUIDE)

THEN YOU WILL FOLLOW THE SAME PROCEDURE AS MENTIONED IN

PREVIOUS PAGE WITH THE EXCEPTION OF MOUNTING YOUR L-TRACK

ANCHORS FIRST. KEEP IN MIND THAT THE L-TRACK ANCHORS

CENTER ON THE FLAT SPOT OF THE KEY WAY AS SHOWN IN THE

IMAGE BELOW.

L-TRACK STUD

WILL LINE UP WITH

THIS KEY WAY

L-TRACK MOUNTING

FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576

ONCE YOU HAVE YOUR BED RAILS UP AND FULLY MOUNTED, YOU

CAN SIMPLY PLACE THE BED PANELS ON AND FASTEN THEM USING

THE 3/8-16 SOCKET HEAD SCREWS, 3/8 FLAT WASHER, AND 3/8

CUSHIONING WASHER, IN THAT ORDER (SEE FIGURE 1)

FIGURE 1

• 3/8 CUSHION WASHER

• 3/8 FLAT WASHER

• 3/8-16 SOCKET HEAD SCREW

PERIODICALLY INSPECT THE FASTENERS

TO ENSURE THEY REMAIN TIGHT. THE RUBBER

WASHER IS PRESENT TO REDUCE VIBRATION

RELATED LOOSENING, BUT IT IS NOT UNCOMMON

FOR THE FASTENERS TO LOOSEN UP OVER TIME

FLATLINE VAN CO • SUPPORT@FLATLINEVANCO.COM • 888-667-5576

THE DIAGRAM BELOW PROVIDES OVERALL DIMENSIONS OF THE BED

PANELS.

68.5” - 74”

60”

Tabla de contenidos

Otros manuales de Accesorios para automóviles de FVC

FVC

FVC TR1103B Manual de usuario

FVC

FVC 24 Inch Upper Cabinet Manual de usuario

FVC

FVC SP0206B Manual de usuario

FVC

FVC Low Pro Roof Rack 148 HR Manual de usuario

FVC

FVC Low Pro Roof Rack 144 LR Manual de usuario

FVC

FVC TR0201B Manual de usuario

FVC

FVC Low Pro Front Fairing Manual de usuario

FVC

FVC Safari Rack 170 Manual de usuario

FVC

FVC Sprinter Side Ladder Manual de usuario

FVC

FVC Sprinter Bed System Adventure Wagon Kit Manual de usuario

FVC

FVC UN3005B Manual de usuario

FVC

FVC SP1104B Manual de usuario

FVC

FVC TR0105B Manual de usuario

FVC

FVC TR0201B Manual de usuario

FVC

FVC TR0106B Manual de usuario

FVC

FVC SP0301B Manual de usuario

FVC

FVC Bed System Adventure Wagon Kit Flarespace Manual de usuario

FVC

FVC TR1101B Manual de usuario

FVC

FVC SP0203B Manual de usuario

FVC

FVC SP0105B Manual de usuario

FVC

FVC Sprinter Rear Step Manual de usuario

FVC

FVC Safari Rack 148 MR Manual de usuario

FVC

FVC TR1105B Manual de usuario

FVC

FVC UN0107B Manual de usuario

Manuales populares de Accesorios para automóviles de otras marcas

James Baroud

James Baroud Odyssey Manual de usuario

Motorola

Motorola i50sx Manual de usuario

Yakima

Yakima 9MM STANDARD BIKE MOUNT Manual de usuario

Feniex

Feniex T3 Manual de usuario

Renault

Renault 77 11 423 180 Manual de usuario

Kia

Kia E8300-4D000 Manual de usuario

Brink

Brink 756843 Manual de usuario

Whispbar

Whispbar K085W Manual de usuario

v.link

v.link CI-VL2-PC-HSD Manual de usuario

Viking

Viking Stack-Rack Guía de configuración rápida

Aries

Aries 203015 Manual de usuario

Choetech

Choetech AT0005 Manual de usuario

ZZ2

ZZ2 ZZAIR-PRO Manual de usuario

Holman

Holman 4A80L Manual de usuario

Thule

Thule 2075 Manual de usuario

Motorola

Motorola T325 Manual de usuario

TAUBENREUTHER

TAUBENREUTHER 16-3950 Guía de instalación

DV8

DV8 FBJL-02 Manual de usuario